A process for debismuthizing lead with magnesium

Significant amounts of bismuth can be removed from magnesium-lead alloys by crystallization of the intermetallic compounds Mg_{0. 6573}Pb_{0. 3427} and Mg_0.662Pb_0.338in the Mg₂Pb, magnesium plumbide phase field of the Pb-Mg-Bi system. The results of the previous studies have been used to develop a process for debismuthizing lead using controlled conditions for the crystallization of magnesium plumbide from alloys containing 0.03 to 0.06 wt Pct bismuth and magnesium whose concentration is determined by the relationship wt Pct Mg = 2.9 + 20 x wt Pct Bi. A flow diagram showing the sequence of operations is presented together with a material balance, which was established from data obtained from individual experiments simulating the previously mentioned unit operations, with a final product containing less than 0.0010 wt Pct Bi. The process also includes the recycling of magnesium recovered by vacuum distillation. Additional procedures are included to extend the process to treat alloys containing up to 1.5 wt pct bismuth.     

A new tool to measure pressure under burn garments

This article introduces a new tool to measure the pressure that is under pressure garments. The Iscan (Tekscan, Inc.) system uses a patented ultra-thin (0.007 inch) sensor with multiple sensing locations that sample continuously at 100 times per second. It is noninvasive, convenient, and quick. The study had two parts. First, we established the validity and reliability of the device. Next, garment/scar interface pressures were measured on new garments with use of the Iscan system. Four garment types were studied, with 10 measurements made in each group: Isotoner gloves (Smith & Nephew Roylan, Inc.); custom-fit pressure gloves; Tubigrip forearm sleeves (Seton Health Care Group); and custom-fit pressure forearm sleeves. Mean garment/scar interface pressures were 18 +/- 2 mm Hg for the Isotoner glove, 34 +/- 5 mm Hg for the custom-fit pressure glove, 20 +/- 7 mm Hg for the Tubigrip sleeve, and 35 +/- 6 mm Hg for the custom-fit sleeve. We concluded that the Iscan system can be used to measure pressure under pressure garments accurately and reliably, and that custom-fit hand and forearm garments provide more pressure than Isotoner gloves or Tubigrip sleeves.     

Fracture initiation at a crack or notch in a viscoplastic material under high rate loading

The two-dimensional problem of an edge crack in a half space or plate is considered. The body is loaded by a suddenly applied, spatially uniform normal velocity imposed on the plane boundary of the body on one side of the edge crack. Otherwise, the boundary of the body, including the crack faces, is traction free. Both cases of an initially sharp crack tip and a narrow notch with small but nonzero notch root radius are considered. The material is modeled as elastic viscoplastic, including strain hardening, rate sensitivity and thermal softening. The applied loading produces predominantly mode II loading in the crack tip region. Under these conditions it is possible to nucleate an adiabatic shear band at the crack tip as a precursor to a mode II fracture. On the other hand, because of the rate sensitivity of the material and the high rate of loading, it may be possible under certain conditions to generate tensile stresses in the crack tip region sufficiently large to nucleate brittle tensile fracture. The problem is solved numerically by means of the finite element method in order to investigate the competition between these two possible fracture initiation mechanisms. The magnitude of the impact velocity imposed on the edge of the plate and the notch tip acuity have an effect on processes near the crack tip. For given material, the inception of crack growth is determined by the competition between a stress-based brittle fracture condition, associated with rate sensitivity and strain hardening, and a strain based criterion, associated with high strain rate and thermal softening.     

Strange chaotic attractor crowding in boost converter model

A set of chaotic attractors is observed on a boost converter model. The union of their Poincare maps is strange. The attractors are densely packed such that they are sensitive to initial conditions. However every attractor in the set is stable with a finite (may be long) period     

Gel-entrapment of perfluorocarbons: a fluorine-19 NMR spectroscopic method for monitoring oxygen concentration in cell perfusion systems

Oxygenation is a major determinant of the physiological state of cultured cells. 19F NMR can be used to determine the oxygen concentration available to cells immobilized in a gel matrix by measuring the relaxation rate (1/T1) of perfluorocarbons (PFC) incorporated into the gel matrix. In calcium alginate gel beads without cells the relaxation rate (1/T1) of the trifluoromethyl group of perfluorotripropylamine (FTPA) varies linearly with oxygen concentration, with a slope of 1.26 +/- 0.15 x 10(-3) s-1 microM-1 and an intercept of 0.50 +/- 0.04 s-1. During perfusion with medium equilibrated with 95%/5% O2/CO2, changes in PFC T1s indicate that the average oxygen concentration was reduced from 894 +/- 102 microM in the absence of cells to 476 +/- 65 microM and 475 +/- 50 microM in the presence of 0.7 x 10(8) EMT6/Ro and RIF-1 murine tumor cells per milliliter of gel, respectively. The presence of 0.2 microliters of FTPA/ml of gel had no effect on the energy status of the cells as indicated by 31P NMR spectra. To calculate oxygen gradients within the beads from the average PFC T1 of the sample, a mathematical model was used assuming that oxygen is the limiting nutrient for cell metabolism and that the cellular oxygen consumption rate is independent of oxygen concentration. Data for EMT6/Ro cells were fit using experimentally determined perfusion parameters together with literature values for cell volume and oxygen consumption rate.(ABSTRACT TRUNCATED AT 250 WORDS)     

Numerical simulation model of vibration responses of rectangular plates embedded with piezoelectric actuators

A numerical simulation model for random large amplitude vibration control of composite plate using piezoelectric material is presented. The H_∞ control design is employed to suppress the large amplitude vibrations of composites plates under random loading. The numerical simulation model is developed and based on the finite element method. The finite element governing equation includes fully coupled structural and electrical nodal degrees of freedom, and consider the von Karman large amplitude vibration. The modal reduction method using the structural modes is adopted to reduce the finite element equations into a set of modal equations with fewer degrees of freedom. The modal equations are then employed for controller design and time domain simulation. In the simulations without control, the value of the linear mode to the nonlinear deflection is quantified; and the minimum number of linear modes needed for accurate model is obtained. In the simulations with control, it is shown that the truncated modes, which are neglected in the control design, deteriorate the controller performance. Generally, the vibration reduction level is not monotonically increasing with the size of the piezoelectric actuator. The optimal piezoelectric actuator size depends on the excitation level. For higher excitation level, optimal actuator size is larger. The H_∞ controller based on the linear finite element formulation gives better vibration reduction for small amplitude vibration, but it still gives reasonable performance for large amplitude vibration provided that the piezoelectric actuator is big and powerful enough.     

Characterization and comparison of PECVD silicon nitride and silicon oxynitride dielectric for MIM capacitors

In this letter, we report on the electrical characteristic and the comparison of the metal-insulator-metal (MIM) capacitors with PECVD silicon nitride (SiN) and silicon oxynitride (SiON). Both capacitors are found to exhibit low leakage and high breakdown field strength, as well as absence of dispersive behavior, good linearity, and comparable quality factor behaviors.     

Field dependence of impact ionization coefficients in In/sub 0.53/Ga/sub 0.47/As

Electron and hole ionization coefficients in In/sub 0.53/Ga/sub 0.47/As are deduced from mixed carrier avalanche photomultiplication measurements on a series of p-i-n diode layers, eliminating other effects that can lead to an increase in photocurrent with reverse bias. Low field ionization is observed for electrons but not for holes, resulting in a larger ratio of ionization coefficients, even at moderately high electric fields than previously reported. The measured ionization coefficients are marginally lower than those of GaAs for fields above 250 kVcm/sup -1/, supporting reports of slightly higher avalanche breakdown voltages in In/sub 0.53/Ga/sub 0.47/As than in GaAs p-i-n diodes.