Landmark-based music recognition system optimisation using genetic algorithms

Audio fingerprinting allows us to label an unidentified music fragment within a previously generated database. The use of spectral landmarks aims to obtain a robustness that lets a certain level of noise be present in the audio query. This group of audio identification algorithms holds several configuration parameters whose values are usually chosen based upon the researcher’s knowledge, previous published experimentation or just trial and error methods. In this paper we describe the whole optimisation process of a Landmark-based Music Recognition System using genetic algorithms. We define the actual structure of the algorithm as a chromosome by transforming its high relevant parameters into various genes and building up an appropriate fitness evaluation method. The optimised output parameters are used to set up a complete system that is compared with a non-optimised one by designing an unbiased evaluation model.     

Studying the needed effort for identifying duplicate issues

Many recent software engineering papers have examined duplicate issue reports. Thus far, duplicate reports have been considered a hindrance to developers and a drain on their resources. As a result, prior research in this area focuses on proposing automated approaches to accurately identify duplicate reports. However, there exists no studies that attempt to quantify the actual effort that is spent on identifying duplicate issue reports. In this paper, we empirically examine the effort that is needed for manually identifying duplicate reports in four open source projects, i.e., Firefox, SeaMonkey, Bugzilla and Eclipse-Platform. Our results show that: (i) More than 50 % of the duplicate reports are identified within half a day. Most of the duplicate reports are identified without any discussion and with the involvement of very few people; (ii) A classification model built using a set of factors that are extracted from duplicate issue reports classifies duplicates according to the effort that is needed to identify them with a precision of 0.60 to 0.77, a recall of 0.23 to 0.96, and an ROC area of 0.68 to 0.80; and (iii) Factors that capture the developer awareness of the duplicate issue’s peers (i.e., other duplicates of that issue) and textual similarity of a new report to prior reports are the most influential factors in our models. Our findings highlight the need for effort-aware evaluation of approaches that identify duplicate issue reports, since the identification of a considerable amount of duplicate reports (over 50 %) appear to be a relatively trivial task for developers. To better assist developers, research on identifying duplicate issue reports should put greater emphasis on assisting developers in identifying effort-consuming duplicate issues.     

Large-scale information retrieval in software engineering - an experience report from industrial application

Software Engineering activities are information intensive. Research proposes Information Retrieval (IR) techniques to support engineers in their daily tasks, such as establishing and maintaining traceability links, fault identification, and software maintenance. We describe an engineering task, test case selection, and illustrate our problem analysis and solution discovery process. The objective of the study is to gain an understanding of to what extent IR techniques (one potential solution) can be applied to test case selection and provide decision support in a large-scale, industrial setting. We analyze, in the context of the studied company, how test case selection is performed and design a series of experiments evaluating the performance of different IR techniques. Each experiment provides lessons learned from implementation, execution, and results, feeding to its successor. The three experiments led to the following observations: 1) there is a lack of research on scalable parameter optimization of IR techniques for software engineering problems; 2) scaling IR techniques to industry data is challenging, in particular for latent semantic analysis; 3) the IR context poses constraints on the empirical evaluation of IR techniques, requiring more research on developing valid statistical approaches. We believe that our experiences in conducting a series of IR experiments with industry grade data are valuable for peer researchers so that they can avoid the pitfalls that we have encountered. Furthermore, we identified challenges that need to be addressed in order to bridge the gap between laboratory IR experiments and real applications of IR in the industry.     

A novel gait generation method independent of target settling-time adjustment for underactuated limit cycle walking

This paper proposes a novel gait generation method for surely achieving constraint on impact posture in limit cycle walking. First, we introduce an underactuated rimless wheel model without ankle-joint actuation and formulate a state-space realization of the control output using the stance-leg angle as a time parameter through an input–output linearization. Second, we determine a control input that moves the control output to a terminal value at a target stance-leg angle during the single-support phase. Third, we conduct numerical simulations to observe the fundamental gait properties and discuss the relationship between the gait symmetry and mechanical energy restoration. Furthermore, we mathematically prove the asymptotic stability of the generated walking gait by analytically deriving the restored mechanical energy.     

Top-<Emphasis Type="Italic">k</Emphasis> overlapping densest subgraphs

Finding dense subgraphs is an important problem in graph mining and has many practical applications. At the same time, while large real-world networks are known to have many communities that are not well-separated, the majority of the existing work focuses on the problem of finding a single densest subgraph. Hence, it is natural to consider the question of finding the top-k densest subgraphs. One major challenge in addressing this question is how to handle overlaps: eliminating overlaps completely is one option, but this may lead to extracting subgraphs not as dense as it would be possible by allowing a limited amount of overlap. Furthermore, overlaps are desirable as in most real-world graphs there are vertices that belong to more than one community, and thus, to more than one densest subgraph. In this paper we study the problem of finding top-k overlapping densest subgraphs, and we present a new approach that improves over the existing techniques, both in theory and practice. First, we reformulate the problem definition in a way that we are able to obtain an algorithm with constant-factor approximation guarantee. Our approach relies on using techniques for solving the max-sum diversification problem, which however, we need to extend in order to make them applicable to our setting. Second, we evaluate our algorithm on a collection of benchmark datasets and show that it convincingly outperforms the previous methods, both in terms of quality and efficiency.     

Flexible multibody simulation using hybrid integration scheme

One issue in the dynamic simulation of flexible multibody system is poor computation efficiency, which is due to high frequency components in the solution associated with a deformable body. Standard explicit numerical methods should take very small time steps in order to satisfy the absolute stability condition for the high frequency components and, in turn, the computational efficiency deteriorates. In this study, a hybrid integration scheme is applied to solve the equations of motion of a flexible multibody system for achieving better computational efficiency. The computation times and simulation results are compared between the hybrid scheme and conventional methods. The results demonstrate that the efficiency of a flexible multibody simulation can be improved by using the hybrid scheme.     

Comparison of two scaling approaches for the development of biomechanical multi-body human models

Dimensional scaling approaches are widely used to develop multi-body human models in injury biomechanics research. Given the limited experimental data for any particular anthropometry, a validated model can be scaled to different sizes to reflect the biological variance of population and used to characterize the human response. This paper compares two scaling approaches at the whole-body level: one is the conventional mass-based scaling approach which assumes geometric similarity; the other is the structure-based approach which assumes additional structural similarity by using idealized mechanical models to account for the specific anatomy and expected loading conditions. Given the use of exterior body dimensions and a uniform Young’s modulus, the two approaches showed close values of the scaling factors for most body regions, with 1.5 % difference on force scaling factors and 13.5 % difference on moment scaling factors, on average. One exception was on the thoracic modeling, with 19.3 % difference on the scaling factor of the deflection. Two 6-year-old child models were generated from a baseline adult model as application example and were evaluated using recent biomechanical data from cadaveric pediatric experiments. The scaled models predicted similar impact responses of the thorax and lower extremity, which were within the experimental corridors; and suggested further consideration of age-specific structural change of the pelvis. Towards improved scaling methods to develop biofidelic human models, this comparative analysis suggests further investigation on interior anatomical geometry and detailed biological material properties associated with the demographic range of the population.     

Moving loads on flexible structures presented in the floating frame of reference formulation

The introduction of moving loads in the Floating Frame of Reference Formulation is presented. We derive the kinematics and governing equations of motion of a general flexible multibody system and their extension to moving loads. The equivalence of convective effects with Coriolis and centripetal forces is shown. These effects are measured numerically and their significance in moving loads traveling at high speed is confirmed. A method is presented to handle discontinuities when moving loads separate from the flexible structure. The method is extended from beam models to general flexible structures obtained by means of the Finite Element Method. An interpolation method for the deformation field of the modal representation of these bodies is introduced.The work is concluded by application of the method to modern mechanical problems in numerical simulations.     

Using dynamic time warping distances as features for improved time series classification

Dynamic time warping (DTW) has proven itself to be an exceptionally strong distance measure for time series. DTW in combination with one-nearest neighbor, one of the simplest machine learning methods, has been difficult to convincingly outperform on the time series classification task. In this paper, we present a simple technique for time series classification that exploits DTW’s strength on this task. But instead of directly using DTW as a distance measure to find nearest neighbors, the technique uses DTW to create new features which are then given to a standard machine learning method. We experimentally show that our technique improves over one-nearest neighbor DTW on 31 out of 47 UCR time series benchmark datasets. In addition, this method can be easily extended to be used in combination with other methods. In particular, we show that when combined with the symbolic aggregate approximation (SAX) method, it improves over it on 37 out of 47 UCR datasets. Thus the proposed method also provides a mechanism to combine distance-based methods like DTW with feature-based methods like SAX. We also show that combining the proposed classifiers through ensembles further improves the performance on time series classification.     

Binarised regression tasks: methods and evaluation metrics

Some supervised tasks are presented with a numerical output but decisions have to be made in a discrete, binarised, way, according to a particular cutoff. This binarised regression task is a very common situation that requires its own analysis, different from regression and classification—and ordinal regression. We first investigate the application cases in terms of the information about the distribution and range of the cutoffs and distinguish six possible scenarios, some of which are more common than others. Next, we study two basic approaches: the retraining approach, which discretises the training set whenever the cutoff is available and learns a new classifier from it, and the reframing approach, which learns a regression model and sets the cutoff when this is available during deployment. In order to assess the binarised regression task, we introduce context plots featuring error against cutoff. Two special cases are of interest, the \( UCE \) and \( OCE \) curves, showing that the area under the former is the mean absolute error and the latter is a new metric that is in between a ranking measure and a residual-based measure. A comprehensive evaluation of the retraining and reframing approaches is performed using a repository of binarised regression problems created on purpose, concluding that no method is clearly better than the other, except when the size of the training data is small.