不同形貌氢氧化镁的化学合成及影响因素

对不同形貌氢氧化镁的化学合成及外部生长环境进行了综述。尤其对影响氢氧化镁结晶性能和形貌起关键作用的因素，如碱性沉淀剂的选择、合成温度的确定、不同镁盐的影响、碱和镁盐的初始浓度及配比、水热处理、反应物的混合方式、晶形控制剂的加入等，进行了详细的阐述。     

高温高压设备瞬态密封分析的三维力学与传热学模型

以大型加氢反应器的高压法兰密封结构为研究对象，建立了瞬态及稳态密封分析的三维力学与传热学模型，主要解决了螺栓载荷的动态模拟和螺栓孔内空气环层的传热计算问题。利用该模型对加氢反应器的瞬态及稳态密封状况进行了计算。     

Coloring effect of the organic hybrid of polyamide 6 and N,N′‐ethylene‐bis(tetrabromophthalimide)

Coloring study in organic hybrid of polyamide (PA6) and N,N′‐ethylene‐bis(tetrabromophthalimide) (EPT), where the chromophore was self‐assembled by hydrogen bonding formed between PA6 molecular chains and EPT compound, have been characterized by several techniques. CS930 double wavelength lamella scanner was employed to measure the change of color. The existence of hydrogen bonding in PA6/N‐N′‐ethylene‐bis (tetrabromophthalimide) (PA6EPT) was investigated with Fourier transform infrared (FTIR), the results of which were compared with that of PA6 with the same thermal history. FTIR spectra at room temperature revealed that there is essentially hydrogen bonding between PA6 and EPT. The crystallization behavior of PA6EPT affected by hydrogen bonding was studied by using FTIR. The temperature‐dependent behavior of both PA6 and PA6EPT was studied by temperature‐FTIR spectroscopy and differential scanning calorimetry (DSC). With temperature increasing, changes in sensitive, high‐resolution absorbance spectra are observed as dissolve‐volatilizing thin film. Temperature‐FTIR results showed that the hydrogen bonding in PA6EPT attenuated and dissociated considerably at a smaller rate than PA6, that is to say, hydrogen bonding in PA6EPT is more stable than that in PA6. DSC showed that the melting temperature of PA6EPT and PA6 are similar. However, the crystalline degree and crystalline temperature and melting enthalpy of PA6 and PA6EPT are different. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 594–600, 2007     

硅铁复合型絮凝剂的实验研究

研究了硅铁复合型絮凝剂的制备方法和絮凝性能 ,确定了其最佳反应条件 ,所得复合型絮凝剂对江水的除浊性能优于聚合硫酸铁 (PFS)和聚合氯化铝 (PAC)。     

微孔陶瓷材料在水处理中的应用

本文从微孔陶瓷的结构特性出发，分析了微孔陶瓷作为过滤介质在水处理除杂净化过程中的过滤机理，论述了微孔陶瓷在饮用水净化处理和某些工业废水、生活污水处理中的应用。     

导电高分子PEDOT／PSS保护银纳米颗粒的制备与表征

利用导电高分子聚（3，4-二氧乙基噻吩）／聚（对苯乙烯磺酸）（PEDOT／PSS）作保护剂，制备了银纳米颗粒，用UV-Vis和TEM对其进行了表征．结果表明，选择合适量的PEDOT／PSS保护剂可以得到大小分布较窄银纳米颗粒．     

整形美容外科用新材料—─瘢痕软化用硅胶纱布膜

本文研究了硅胶纱布膜的制备方法和治疗效果。在增生性瘢痕的治疗中，硅凝胶能较快地软化和减轻瘢痕，其治疗时间要比加压疗法短。目前，对硅凝胶的作用机理尚未完全明了，但一般认为水化和封闭是治疗作用的主要基础     

A new core–shell type fluorinated acrylic and siliconated polyurethane hybrid emulsion

A novel core–shell type fluorinated acrylic and siliconated polyurethane (FSiPUA) hybrid emulsion was prepared by seeded emulsion polymerization using siliconated polyurethane (SiPU) as a seed and forming the structure with SiPU as a shell and the copolymer of butyl acrylate (BA) with 2,2,2-trifluoroethylmethacrylate (TFEMA) as a core. SiPU was synthesized using isophorone diisocyanate (IPDI), polytetramethylene ether glycol (PTMG), polypropylene glycol (PPG), dihydroxybutyl-terminated polydimethylsiloxane (PDMS), dimethylol propionic acid (DMPA), 1,6-hexanediol (HDO) and triethylamine (TEA). The contents of siloxane and fluorine were determined according to the feed ratio. Fourier transform infrared spectroscopy (FTIR) was used to identify the chain structure of SiPU and FSiPUA. Investigation of transmission electron microscopy (TEM) confirmed the core–shell structure of FSiPUA emulsion and gave the particle size at about 50 nm. The measurement results of water contact angles and the solvent absorptions in water and n-octane for cured films showed that the water and the oil repellency for FSiPUA had been improved significantly with a suitable content of fluorine and siloxane.     

乙苯脱氢氧化制苯乙烯工艺过程分析

对乙苯脱氢氧化工艺过程进行了热力学分析，表明氧化烧氢具有提高平衡转化率和能量合理利用的优点。通过一维拟均相模型模拟计算，比较了乙苯脱氢与乙苯脱氢氧化的反应效果，并由实验得到了验证。同时还讨论了乙苯实验转化率提高不多的原因。     

Torque Transmission Capabilities of Bonded Polygonal Lap Joints for Carbon Fiber Epoxy Composites

Although carbon fiber epoxy composite materials have excellent properties for structures, the joint in composite materials often reduces the efficiency of the composite structure because the joint is often the weakest area in the composite structure.

In this paper, the effects of the adhesive thickness and the adherend surface roughness on the static and fatigue strengths of adhesively-bonded tubular polygonal lap joints have been investigated by experimental methods. The dependencies of the static and fatigue strengths on the stacking sequences of the composite adherends were observed.

From the experimental investigations, it was found that the fatigue strength of the circular adhesively-bounded joints was quite dependent on the surface roughness of the adherends and that polygonal adhesively-bonded joints had better fatigue strength characteristics than circular adhesively-bonded joints.