ASMEPTC4-2008锅炉性能试验效率计算软件开发与应用

ASME PTC 4-2008锅炉性能试验效率计算软件能够大大便利规程中的有关计算。本文以ASME PTC4-2008锅炉性能试验规程为基础,结合我国实际情况进行了该软件的开发。经过现场检验,在计算结果的准确性、易用性及适应性上都满足科研人员日常使用的要求。该软件涵盖新版标准要求的各项损失和外来热量的计算,并包括试验结果的不确定度计算。     

废短纤维/橡胶复合材料的力学和疲劳性能

考察了橡胶再生废短纤维的表面特性和长度分布，研究了橡胶再生废短纤维／橡胶复合材料（ＷＳＦＲＣ）的力学性能以及纤维表面预处理对它的影响，探讨了它在橡胶工业中应用的可能性。对ＷＳ－ＦＲＣ的动态拉伸和压缩疲劳性能也进行了考察。结果表明：随着纤维用量的增加．ＷＳＦＲＣ的拉伸和压缩疲劳性能下降；与同样硬度的纯炭黑胶料相比，ＷＳＦＲＣ的疲劳温升更低；ＷＳＦＲＣ的疲劳性能还随纤维排列方向的不同而变化。     

双环戊二烯系列石油树脂的合成与应用

讨论了双环戊二烯系列石油树脂的合成与应用。     

全国废旧橡胶循环利用科技创新论坛在京举行

为在橡胶行业进一步实施循环经济,不断推进中国橡胶工业科学发展,不断推动废旧橡胶循环利用的科技创新,中国橡胶工业协会最近与中国石油和化学工业协会、中国环境保护产业协会在北京联合举办了“全国废旧橡胶循环利用科技创新论坛”。中国橡胶工业协会鞠洪振会长、范仁德秘书长,中国石油和化学工业协会李勇武会长、谭竹洲名誉会长、杨伟才副会长,中国环保产业协会企业部齐晓君主任出席了会议。来自中国橡胶工业协会废橡胶综合利用分会、轮胎分会、技术经济委员会、助剂专业委员会和营销工作专业委员会的相关企业和专家、各分会(专业委员会)…     

吸收剂量对二甲基硅橡胶与甲基乙烯基硅橡胶分子量和凝胶含量的影响

将ＧＰＣ和特性粘数［η］测定相结合，在室温和－７８℃下，用Ｃｏ~（６０）辐射源辐照，研究了二甲基硅橡胶（ＭＱ，吸收剂量２．０５×１０~３～３．９７×１０~４Ｇｙ）和甲基乙烯基硅橡胶（ＭＶＱ，吸收剂量１０~２～１０~４）分子量和凝胶含量的变化。结果表明，辐照ＭＶＱ较辐照ＭＱ易生成凝胶，在凝胶点前的较低吸收剂量时，溶胶的分子量出现极大值，分子量分布曲线呈单峰；随吸收剂量的增加，分子量分布变窄，分子量降低；出现凝胶的吸收剂量，ＭＱ大约是ＭＶＱ的１０倍。辐照ＭＱ时，凝胶点前的溶胶的分子量分布曲线为双峰，并随吸收剂量的增加，双峰消失，分子量下降；在凝胶点时，分子量出现极大值。     

Experimental Simulation of the Reactor Section of Fluid Cokers: Comparison of FCC and Fluid Coke Particles

The hydrodynamics of fluid cokers were studied in a pressurized fully cylindrical cold model of diameter 483 mm, geometrically and dynamically scaled down by a factor of ～20 from commercial units. Differential pressure fluctuations, voidage distributions, solids momentum flux distributions and steady state gas mixing behaviour in the reactor section are compared for the same operating conditions with two kinds of particles, FCC and fluid coke. The voidage distributions and core‐annular flow structures in the reactor section were similar enough that either FCC or fluid coke particles can be used for cold modelling of fluid cokers.     

过渡金属对Ru/海泡石催化剂加氢性能及表面性质的影响

用浸渍法制备了一系列含不同助剂Mo、Co、Mn、Cu、Zr等的Ru/海泡石催化剂，以CO₂及苯加氢为探针反应，以TPD和CS₂中毒为手段研究了助剂对Ru/海泡石催化剂加氢、反应物吸附及活化性能的影响。结果表明，助剂的加入显著地影响Ru/海泡石催化剂的催化活性，且随着反应分子的加大，这种影响随之增大；助剂对催化反应中反应物的吸附、活化过程的影响是其影响催化活性的重要原因。另外，结果还表明，助剂的加入还调整了Ru/海泡石催化剂的表面性能，但并没有改变活性中心的类型。     

酸、碱及盐对胶乳法氯化天然橡胶热稳定性的影响

采用热老化实验结合紫外光谱分析和热分析，分析了酸、碱及盐对胶乳法氯化天然橡胶(CNR)热稳定性的影响，并讨论了酸、碱及盐对CNR热降解的影响机理。研究结果表明：胶乳法CNR产品中含有酸、碱、盐时，对CNR的结构有不利的影响，其影响随含量增高而增大，其中又以碱对结构的不利影响最大。因此，在胶乳法生产CNR的生产工艺中，最后的酸碱中和、洗涤2道工序必须严格控制工艺条件，保证半成品的pH值和含盐量达到标准。     

炼厂外排污水回用于循环冷却水腐蚀影响因素初探

从单因素、多因素和复杂水系考察了炼厂外排污水回用于循环冷却水腐蚀的影响因素，结果表明，碳钢腐蚀的主要影响因素取决于离子特性、氧化膜的形成和溶解氧的扩散等综合协同作用，其中以离子特性的,影响为最大（如：Cl^-、Ca^2 、CO3^2-的腐蚀性较强）。碳钢腐蚀反应又可由以上三种主要影响因素分为三个反应控制区，而当电导率在0．1－2．0mS/cm范围时，其水质属于腐蚀危险高发区。从而也进一步说明水质的低电导率处理，其防腐效果并不理想，相反在高电导率情况下却表现出相对较好的低腐蚀性能。     

Amelioration of mechanical brittleness in hyperbranched polymer. 1. Macroscopic evaluation by dynamic viscoelastic relaxation

Hyperbranched poly(ether ketone)-b-linear poly(ether ketone)-b-hyperbranched poly(ether ketone) (HLHPEK) triblock copolymers with two different block compositions were prepared as an approach to improve the mechanical brittleness of hyperbranched poly(ether ketone) (HPEK). From the time-temperature superposition of dynamic shear moduli, G′(ω) and G″(ω), of HPEK and two HLHPEKs, it was investigated that the junction points between G′(ω) and G″(ω) shifted to the higher frequencies and the rubbery plateau region spread wider over the reduced frequency axis as the linear blocks were introduced and their compositions were increased. Such changes in viscoelastic response were consequences of increase in the amount of chain entanglements additionally formed by the linear blocks. In order to verify the effect of the linear block incorporation on amelioration of the mechanical brittleness, the degree of brittleness and its improvement were evaluated from the temperature dependence of the shift factors, a_Ts, experimentally obtained during the superposition of the dynamic moduli and of the average viscoelastic relaxation times, τ_HNs, determined with empirical Havriliak-Negami distribution function. From the nonlinear curve fittings of the a_Ts and the τ_HNs by the Vogel-Tamman-Fulcher equation, the degree of brittleness for HPEK and HLHPEK triblock copolymers were quantified as values of the material parameter D, an indicative of deviation from the linear Arrhenius behavior and a measure of fragility of the given material. The tendency of increasing D values with the linear block compositions confirmed substantial improvement of the mechanical brittleness in the HLHPEK triblock copolymers compared to HPEK. Therefore, the approach to copolymerize HPEK with its chemically analogous linear counterpart was verified to be an effective strategy to impart molecular entanglements and hence ameliorate the mechanical brittleness on the basis of macroscopic rheological evaluation.