晶体微粒光致旋转的角速度受其厚度影响分析

从理论上分析了光束自旋角动量使晶体微粒光致旋转的原理。基于MATLAB模拟了不同激光功率下晶体微粒的厚度与其旋转角速度的变化关系,并给出了同一激光功率下不同厚度的晶体微粒获得最大旋转角速度时的理论数据。该结果对实验中如何有效地提高晶体微粒的旋转角速度有一定的指导意义。     

机载预警雷达共形阵应用技术分析

随着隐身技术发展,机载预警雷达主要作战对象的雷达散射截面积已经降低了一个数量级,现有机载预警雷达的探测威力已经不能满足军方作战需求.因此,充分利用载机平台外形、扩大雷达孔径的共形阵雷达将成为未来机载预警雷达的发展趋势.文中首先简述了机载共形阵预警雷达的特点,介绍了国外机载共形阵技术的发展;然后,通过仿真分析了共形阵最基本形式的方向图特性;最后,针对美国E-2这种小型上单翼螺旋桨飞机,分析了共形阵技术应用在这种载机上的可行性,指出了共形阵在这种载机上的一些问题.     

RSA专家支招应对企业内控

7月8日,RSA,EMC信息安全事业部在北京举行小型媒体交流会,RSA负责全球产品管理与策略的副总裁SamCurry介绍了一种简化IT合规、降低合规成本的思路和途径。另外,他到访中国的使命之一也是听取中国用户对RSA即将开发的产品的意见,因为这些产品将正是未来三年、五年、十年内中国用户需要的产品。     

基于nRF24L01的无线温度采集系统设计

介绍一种由nRF24L01型无线数据传输器和高精度的单总线数字温度传感器DS18B20组成的无线数据传输系统;详细阐述该系统的硬件和软件设计要点;给出基于STC12LE5408设计的nRF24L01硬件接口电路和程序代码;并讨论该系统在无线温度采集系统中的应用。     

基于光纤布里渊散射的分布式海洋水温获取技术

海水温度的分布情况具有极其重要的实际价值.分析了几种光纤散射测温技术,研究了基于布里渊散射技术的分布式光纤测温技术,从理论上分析了布里渊散射光的频移和强度与海水温度和应力的关系,设计了基于此技术的分布式海洋水温获取系统.     

用于PDIC的跨阻放大器的优化设计

提出了一种用于PDIC的跨阻放大器.电路由三级相同的推挽放大器级联而成,每级均采用一动态电阻对负载进行补偿,以提高放大器的相位裕度.反馈电阻由一栅极受控的PMOS管替代,避免了大尺寸多晶硅电阻引入的附加相移,增加了电路的稳定性.采用XFAB 0.6μm CMOS工艺提供的PDK,在Cadence Spectre环境下进行电路设计、仿真验证.仿真结果表明,电路的增益、带宽及稳定性均得到满意结果.

Abstract：

Presented is a transimpedance amplifier for PDIC.The designed amplifier is configured on three identical push-pull amplifier stages that use an active load compensated by an active resistor to improve the phase margin of the amplifier.The feedback resistor is replaced by a PMOS transistor which is biased by the gate voltage.The replacement not only avoids the phase-shift introduced by the large ploy-resistor but improves the stability performance of the transimpedance amplifier.Based on XFAB's 0.6 μm CMOS,circuit design and simulation were performed by using Cadence Spectre.The simulation results show that the gain,bandwidth and stability of the amplifier all achieve good performance.     

Overlay mark optimization for thick-film resist overlay metrology

For thick resist implant layers, such as a high voltage P well and a deep N well, systematic and uncorrectable overlay residues brought about by the tapered resist profiles were found. It was found that the tapered profile is closely related to the pattern density. Potential solutions of the manufacturing problem include hardening the film solidness or balancing the exposure density. In this paper, instead of focusing on the process change methodology,we intend to solve the issue of the overlay metrology error from the perspective of the overlay mark design. Based on the comparison of the overlay performances between the proposed overlay mark and the original design, it is shown that the optimized overlay mark target achieves better performance in terms of profiles, dynamic precision,tool induced shift (TIS), and residues. Furthermore, five types of overlay marks with dummy bars are studied, and a recommendation for the overlay marks is given.     

A VCO sub-band selection circuit for fast PLL calibration

consumes 0.64 mA at most.     

An area-saving dual-path loop filter for low-voltage integrated phase-locked loops

This paper proposes an area-saving dual-path loop filter (LPF) for low-voltage integrated phase-locked loops (PLLs). With this LPF, output current of the lowpass-path charge-pump (CP) is B times (B>1) as great as that of the integration-path CP. By adding voltages across these two paths, the zero-capacitance is magnified B times equivalently. As a result, the chip size is greatly reduced. Based on this LPF, a 1.2 V 3.5 GHz-band PLL is fabricated in SMIC 0.18 μm RFCMOS technology. Its zero-capacitance is only 1/30 of that in conventional second-order LPFs. Measured data show that, at a frequency of 3.20 GHz, phase noise is -120.2 dBc/Hz at 1 MHz offset, reference spur is -72 dBc, and power is 24 mW.     

An algorithm for interferometric SAR data processing

In this paper, an algorithm of generating INSAR unwrapped phase image from SAR single-look complex images is presented. Besides the general processing technique, this article focuses on the methods of flat-earth phase removal, phase noise reduction and phase unwrapping. The availability is tested by the results of processing ERS-1/2 SAR images.