Solution of large deformation contact problems with friction between Blatz-Ko hyperelastic bodies

The present paper is devoted to the analysis of the contact problems with Coulomb friction and large deformation between two hyperelastic bodies. One approach to separate the material nonlinearity and contact nonlinearity is presented. The total Lagrangian formulation is adopted to describe the geometrically nonlinear behavior. Nondifferentiable contact potentials are regularized by means of the augmented Lagrangian method. Numerical examples are carried out in two cases: rigid-deformable contact and deformable-deformable contact with large slips. The numerical results prove that the proposed approach is robust and efficient concerning numerical stability.     

A generalized equation for the prediction of melting temperatures of homopolymers and copolymers

A generalized equation was derived to calculate the melting temperatures of homopolymers and copolymers. The Gibbs‐Thomson equation for homopolymers and a modified application to copolymers were derived using the proposed equation. The melting temperature T_m⁰ in the Flory equation corresponds to the melting temperature T_m^C,∞ of copolymer crystals with stems of infinite length. Also, T_m^C,n*, the melting temperature for copolymer crystals with stems containing the maximum possible number of structural units, n*, should be used instead of T_m⁰ as the basis of supercooling in crystallization. The proposed equation shows good agreement with experimental data for α‐alkene‐ethylene homogeneous copolymers.     

中温换热器检查及修复方案

经分析认为中温换热器缺陷出现的主要原因是H2 S腐蚀。采取更换短管以及补焊上段下管板的措施进行修复 ,取得了满意的效果     

Bi3+对纳米MnO2水热合成的影响研究

在中性和酸性条件下，以MnO2作为锰源，通过水热合成了纳米MnO2，通过XRD和TEM对产物进行的观察表明，在酸性条件下，向溶液中添加一定量的Bi^3 ，产物的晶型由α型向γ型转化，产物形貌由针状、丝状向颗粒状转变。     

烷基烷氧基硅烷的合成方法及其在涂料中的应用

介绍了烷基烷氧基硅烷的合成方法(包括烷基的引入方法和烷氧基的形成方法)、近几年来在涂料中的应用及其结构与性能的关系。     

基于多分辨率的图象压缩系统结构分析

本文着重对图象多分辨率技术进行分析，并提出了相应的系统结构成框架，同时还探讨了以图象多分辨率处理为核心，采用了 新的压缩编码的可能性。     

Decoding algebraic-geometric codes up to the designed minimumdistance

A simple decoding procedure for algebraic-geometric codes C _Ω(D,G) is presented. This decoding procedure is a generalization of Peterson's decoding procedure for the BCH codes. It can be used to correct any [(d*-1)/2] or fewer errors with complexity O(n³), where d * is the designed minimum distance of the algebraic-geometric code and n is the codelength     

P／MCs新型复合材料制备、结构及阻尼性能

采用特殊的渗流法所制备的新型Ｐ／ＭＣｓ复合材料，由高分子聚合物与蜂窝状铝架组成，它具有优异的阻尼性能，并简述了结构对阻尼的影响     

Combustion synthesis of advanced materials: Part I. Reaction parameters

An explanation of combustion (self propagating high temperature) synthesis (SHS) is given together with a historical perspective of the examination of such exothermic reactions. The application of thermochemical functions has been used to predict theoretically the maximum adiabatic temperature, T_ad. This, combined with a knowledge of the ignition temperature, T_ig, and the actual combustion temperature, T_c, has been used to determine the heat loss from the SHS reaction and the amount of heat needed to raise the adjacent, cold, reactant layer to the ignition temperature in order to maintain the self sustaining nature of the propagating mode of the reaction. The pertinent reaction parameters that control self propagating high temperature (combustion) synthesis reactions have been examined. These include: reactant particle size and shape; powder mixing and compaction; green density; reaction stoichiometry; impurities; volatiles and diluents; reaction environment; mode and technique of ignition; heating rate; and the effect of these parameters on the generation of heat, exothermicity and control of the SHS reaction.