适用于扩展有限元裂缝计算的钢筋与混凝土粘结滑移关系

以定量分析钢筋与混凝土粘结滑移关系为目标,利用RCXFEHohai-P扩展有限元程序,计算采用不同粘结滑移公式时钢筋混凝土简支梁的最大裂缝宽度。结果表明,计算所得最大裂缝宽度各不相同,且都与《混凝土结构设计规范》(GB 50010—2010)所列最大裂缝宽度公式计算值存在差别。为此,基于GA-BP神经遗传网络,以规范最大裂缝宽度公式计算值为预测目标,反演得到适用于扩展有限元裂缝计算的粘结滑移公式,算例表明该公式能满足扩展有限元裂缝宽度计算要求。研究成果对提高扩展有限元裂缝分析的准确性具有一定的参考价值。     

黄金峡水利枢纽工程大型水泵机组选型设计及运行调节研究

引汉济渭工程黄金峡水利枢纽是陕西省境内一项重要的大型跨流域调水工程,泵站装机容量和设计流量均为目前国内甚至亚洲在建和已建泵站之最,且调水过程复杂、调水流量分布范围宽广。在分析黄金峡泵站调度原则及运行方式的基础上,综合比较目前国内外大型泵站机组设计制造水平、枢纽建筑物及机电设备投资等因素,详细论证了大型单级单吸离心式水泵机组台数和性能参数的确定方法及其影响因素,并给出了黄金峡泵站机组选型设计的最优方案,同时论证了采用变频调节的必要性及其效果。研究结果可为大型调水泵站机组的选型设计提供参考。     

Local artificial boundary conditions for Schrödinger and heat equations by using high-order azimuth derivatives on circular artificial boundary

The aim of the paper is to design high-order artificial boundary conditions for the Schrödinger equation on unbounded domains in parallel with a treatment of the heat equation. We first introduce a circular artificial boundary to divide the unbounded definition domain into a bounded computational domain and an unbounded exterior domain. On the exterior domain, the Laplace transformation in time and Fourier series in space are applied to achieve the relation of special functions. Then the rational functions are used to approximate the relation of the special functions. Applying the inverse Laplace transformation to a series of simple rational function, we finally obtain the corresponding high-order artificial boundary conditions, where a sequence of auxiliary variables are utilized to avoid the high-order derivatives in respect to time and space. Furthermore, the finite difference method is formulated to discretize the reduced initial–boundary value problem with high-order artificial boundary conditions on a bounded computational domain. Numerical experiments are presented to illustrate the performance of our method.     

多孔陶瓷分离膜

多孔陶瓷膜由于其优良的耐高温、耐腐蚀、耐微生物侵蚀等性质，近年来被快速地应用于分离领域。本文介绍其制备方法、性能测定及应用前景。     

EBR胶乳凝胶的控制及其对ABS树脂冲击性能的影响

主要讨论了摩尔质量调节剂，延长后期反应时间，提高后期反应温度，过硫酸钾用量等对乙烯－丁二烯橡胶（EBR）胶乳凝胶的影响；同时讨论了低凝胶条件和高凝胶条件下凝胶对ABS树脂性能的影响。结果表明：低凝胶条件,ABS树脂的冲击性能随凝胶质量分数的增加而增加；高凝胶条件下，则随凝胶质量分的增加而降低，得到了EBR胶乳生产中凝胶的主要控制方法，并通过控制EBR胶乳凝胶来实现对ABS树脂冲击性能的控制。     

Position Unmanned Aerial Vehicles in the Mobile Ad Hoc Network

This paper considers the problem of employing multiple unmanned aerial vehicles (UAVs) to the mobile ad hoc network (MANET) as relay backbone nodes to construct the backbone network, to improve the network connectivity, and to address many issues in the MANET such as linkage, capacity, load balance, and reliability. With considering the dynamic nature of the problem, this study provides several linear location problem models and their extensions to accommodate these issues. Due to the size of linear location models associated with a large number of constraints, the problem becomes computational challenging even with modest size of nodes. To overcome the computational barrier, we recast these location problem models using a quadratic unconstrained binary optimization (QUBO) framework and solve these QUBO models with a Tabu search heuristic with preprocessing. The analysis of the solutions that are produced by QUBO together with the comparisons made with the linear model highlight both the attractiveness and robustness of the proposed approach. The results of this study provide support to future advanced routing protocol development.     

Preparation,characterization, and adsorption properties for metal ions of a novel chelating resin containing sulfoxide and diethylene glycol

A novel chelating resin containing sulfoxide and diethylene glycol, poly{4‐vinylbenzyl‐[2‐2‐(hydroxyethyl)ethoxyl]sulfoxide} (PVESO) was synthesized using chloromethylated polystyrene (PS‐Cl) as material. Its structure was characterized by elemental analysis, infrared spectra, and scanning electron microscopy (SEM). The adsorption capacities of the resin for Hg²⁺, Ag⁺, Cu²⁺, Zn²⁺, and Pb²⁺ at various pH values were determined. The maximum adsorption capacities for Hg²⁺ and Ag⁺ were 1.56 and 0.75 mmol g^?1 respectively. The resin had high selectivity for Hg²⁺ and Ag⁺ over the pH range 1.0–7.0. The adsorption capacities for Hg²⁺ and Ag⁺ under competitive condition were also determined by batch experiment method. In addition, the adsorption kinetics of the resin towards Hg²⁺ at different temperatures was also investigated. The results showed that the adsorption rate was governed by film diffusion at 20°C and 25°C, by particle diffusion at 30°C and 35°C. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 6054–6059, 2006     

钛酸钡基铁电材料的介电非线性研究

通过A位或B位掺杂改性得到的钛酸钡基铁电材料,在外加直流偏置电场作用下,具有介电常数非线性可调的优异介电性能,可以广泛地应用于压控可调陶瓷电容器和微波可调器件领域。针对钛酸钡基铁电材料的介电非线性特性,讨论了BaTiO_3基铁电材料分别在铁电相、顺电相以及相转变温度场附近的介电非线性机理和相关理论;结合笔者近年来有关介电非线性研究的实验结果和相关文献报道,综述了不同A位离子(如Sr~(2-)和Ca~(2-)等)或B位离子(如Zr~(4 )和Sn~(4-)等)掺杂的BaTiO_3基铁电材料体系的介电非线性研究现状,分别对不同物质形态(陶瓷块体、薄膜和厚膜)的BaTiO_3基铁电材料的介电非线性研究及其应用进行了对比分析;并对钛酸钡基铁电材料今后的发展趋势和研究方向进行了展望。     

不同形貌ZnO气敏材料的制备及影响气敏性因素分析

以锌盐和碱为原料,采用水热和溶剂热法合成了三种形貌的氧化锌粉体,利用X射线衍射仪(XRD)、扫描电子显微镜(SEM)和X射线光电子能谱仪(XPS)对产物的结构和形貌及表面化学状态进行了表征,并将粉体制备成厚膜型气敏元件,测试了其对几种还原性气体的气敏性能,结果表明:在工作温度为395℃时,三种形貌氧化锌对相同浓度的同种测试气体的灵敏度大小顺序为:菜花状氧化锌﹥棒状氧化锌﹥六棱柱状氧化锌。并对影响氧化锌材料气敏性的各种因素进行了分析。