Polysaccharide‐based artificial extracellular matrix: Preparation and characterization of three‐dimensional,macroporous chitosan,and heparin composite scaffold

Scaffold‐guided tissue engineering based on synthetic and natural occurring polymers has gained many interests in recent year. In this study, the development of a chitosan‐heparin artificial extracellular matrix (AECM) is reported. Three‐dimensional, macroporous composite AECMs composed of heparin (Hep) and chitosan (Chito) were prepared by an interpolyelectrolyte complex/lyophilization method. The Chito‐Hep composite AECMs were, respectively, crosslinked with glutaraldehyde, as well as cocrosslinked with N,N‐(3‐dimethylaminopropyl)‐N′‐ethyl carbodiimide (EDC/NHS) and N‐hydroxysuccinimide (NHS). The crosslinking reactions were examined by FT‐IR analysis. In physiological buffer solution (PBS), the EDC/NHS‐crosslinked Chito‐Hep composite AECM showed a relative lower water retention ratio than its glutaraldehyde‐crosslinked counterparts. The EDC/NHS‐crosslinked Chito‐Hep composite AECMs showed excellent biocompatibility, according to the results of the in vitro cytotoxic test. This result suggested that the EDC/NHS‐crosslinked Chito‐Hep composite AECMs might be a potential biomaterial for scaffold‐guided tissue engineering applications. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Flammability ranking of foliage species by factor analysis of physical and chemical pyric properties

In this paper, factor analysis is introduced to evaluate the flammability of 55 foliage species that may be used in China for construction of the fuel break network of forest strips with lower flammability. Six pyric parameters, i.e. air dry moisture content, absolute dry moisture content, ignition point, ash content, caloric value and extractive content, are measured and used as variables for factor analysis. The covariance analysis shows that four principal factors can be extracted to reflect the flammability in different physical and chemical senses. In terms of the contributions of the four factors to the variances and the physical significance of the relevant parameters, the four factors are, respectively, termed as ‘flaming factor,’ ‘air dry factor,’ ‘ash factor’ and ‘absolute dry factor.’ The stability of the factor analysis method is examined by a different number of samples considered, and the variation degrees of the orderings indicate that the method has high reliability to measure the total flammability of foliage species. The results of the flammability evaluation are verified by comparison with the recommended tree species in the Chinese technology standard. Copyright © 2008 John Wiley & Sons, Ltd.     

Km高温抗蚀耐磨涂料在省煤器中的应用

锅炉省煤器磨损一直是困绕锅炉稳定运行的主要因素之一。本介绍了Km高温抗蚀耐磨涂料的性能、特点，以及在实际生产中的使用情况，通过实践充分肯定了Km高温抗蚀耐磨涂料的可行性、可靠性和经济性。     

西南油气田建设用地面临的困难及其对策

从四川盆地油气勘探开发建设用地特点入手,分析了西南油气田用地现状和新形势下油气勘探开发建设用地在保证工期、控制成本、提高效率、政策支持、关系协调等方面所面临的挑战,提出了下一步为保证生产建设用地按时、有效、科学、合理、合法的取得而应采取的有效措施。     

紧凑 Tokamak(球形环)聚变堆第一壁及中心导体柱上中子负荷及核热计算与分析

采用通用蒙特卡罗粒子输运程序ＭＣＮＰ／３８计算低环径比Ｔｏｋａｍａｋ（紧凑环或球形环）聚变堆第一壁及中心导体上的中子壁负荷分布和核热沉积分布，并与常规Ｔｏｋａｍａｋ堆第一壁上中子壁负荷分布和核热沉积分布进行比较、分析。结果表明，在中子壁负荷归一化为１ＭＷ／ｍ２时，与常规Ｔｏｋａｍａｋ相比，在低环径比Ｔｏｋａｍａｋ堆第一壁及中心柱表面上中子壁负荷分布峰值并不比常规Ｔｏｋａｍａｋ堆第一壁上的峰值高，而且低于低环径比Ｔｏｋａｍａｋ堆整个第一壁上的平均值，而中心柱上的核热沉积峰值稍高于常规Ｔｏｋａｍａｋ堆第一壁上的核热沉积峰值，但对较高中子壁负荷情况，中心导体柱上的核热沉积和辐照损伤仍可能是比较严重和值得特别研究的问题。     

2006年中国钨工业发展报告

综述了2006年我国钨工业发展现状,分析了钨工业经济运行的政策环境、产业结构、市场供需、竞争态势,指出了当前钨工业发展中的几个突出问题,并提出了相应的对策建议。     

C pm MPPAC for manufacturing quality control applied to the precision voltage reference process

The multiprocess performance analysis chart (MPPAC) based on the process capability index C_pm, called C_pm MPPAC, is developed for analysing the manufacturing quality of a group of processes in a multiple process environment. The C_pm MPPAC conveys critical information of multiple processes regarding the departure of the process and process variability from one single chart. Existing research works on MPPAC are restricted to obtaining quality information from one single sample of each process ignoring sampling errors. The information provided from existing MPPAC charts, therefore, is unreliable and misleading and results in incorrect decisions. In this paper, we consider the natural estimator of C_pm based on multiple samples. Based on the natural estimator of C_pm, we consider the sampling errors by providing an explicit formula with the Matlab program to obtain the estimation accuracy of the C_pm. We tabulate the sampling accuracy of C_pm for sample size determination so that the engineers/practitioners can use it for their in-plant applications. An example of multiple precision voltage reference (PVR) processes is presented to illustrate the applicability of C_pm MPPAC for manufacturing quality control.     

矢量图形智能判断技术的研究与应用

研究矢量图形识别是建立工程制图自动阅卷与计算机辅助教学系统的基础。由于组成二维矢量图形图元类型的多样化及图形整体位置状态的不确定性，增加了矢量图形的识别与判断难度。结合开发的《三视图智能解答》系统，研究其智能识别与判断技术。系统中引入三视图导航技术，解决了图形整体定位与识别问题。实现了对矢量图形图元素信息的分类和提取，能够对所提取的的信息与标准答案进行智能判断与评定。该方法已在AutoCAD2000环境下使用AutoLISP语言编程实现。