Driving characteristics of octagon-type ultrasonic motor

Structure of the octagon-type ultrasonic motor was proposed and designed so as to allow the motor to drive small actuator. The stator of the motor consisted of the octagon shape elastic body and four rectangular plate ceramics. The four ceramics were attached to outer surfaces of the octagon elastic body. The same phase voltages were applied to the ceramics on horizontal surfaces, and 90° phase difference voltages were applied to the ceramics on vertical surfaces. When the AC voltage with 90° phase difference was applied in ceramics, the elliptical displacement of unimorph bars was generated by generating bending vibration. To find the maximum displacement model that generates elliptical displacement at the centers of the inner surfaces, the finite element analysis program ATILA was used. The analyzed results were compared to the experimental results. As a result, the speed and torque are increased linearly by increasing the input voltage and the speed of motors can be controlled by changing the applied voltages.     

基于双辊铸轧的Al-Zn-Mg-Cu系合金冷轧后的再结晶行为

将双辊铸轧运用于制造Al-Zn-Mg-Cu合金带材。研究带材减薄率及热处理温度对合金再结晶行为的影响。结果表明：在冷轧率为60％、热处理制度为500℃的条件下处理1h时,合金带材具有细晶组织（平均晶粒尺寸约为13μm,晶粒纵横比约为1．7）和高的力学性能（UTS≥360MPa,δ≥20％）。研究了微观组织对Al-Zn-Mg-Cu合金带材力学性能的影响。合适的双棍铸轧热处理及加工工艺能制造低价、高强的Al-Zn-Mg-Cu合金带材。     

A New Approach for Manufacturing a High Porosity Ti-6Al-4V Scaffolds for Biomedical Applications

Titanium and its alloys are currently considered as one of the most important metallic materials used in the biomedical applications, due to their excellent mechanical properties and superior biocompatibility. In the present study, a new effective method for fabricating high porosity titanium alloy scaffolds was developed. Porous Ti-6Al-4V scaffolds are successfully fabricated with porosities ranging from 30% to 70% using spaceholder and powder sintering technique. Based on its acceptable properties, spherical carbamide particles with different diameters （0.56, 0.8, and 1mm） were used as the space-holder material in the present investigation. The Ti-6Al-4V scaffolds porosity is characterized by using scanning electron microscopy. The results show that the scaffolds spherical-shaped pores are depending on the shape, size and distribution of the space-holder particles. This investigation shows that the present new manufacturing technique is promising to fabricate a controlled high porosity and high purity Ti-6Al-4V scaffolds for hard tissue replacement.     

非对称双级环路行波热声热机的实验研究*

对于双级环路行波热声热机,两个热声核的相对位置直接影响到其起振温度,而热声热机的起振温差决定了其可利用的热源品位。基于线性热声理论分析,通过改变两个热声核的相对位置,研究了两个热声核的相对位置改变对其起振温差、压力振幅和压比等的影响。结果表明,双级环路行波热声热机的起振温度随着两个热声核从中心对称位置逐步靠近时先下降再上升,当两个热声核之间的谐振管长度比例为1:3.5时,系统获得最小的起振温差为59.6℃（工质为N₂,充气压力为2.5 MPa）。在相同温差下,该系统在谐振管长度比例为1:3.5的位置相较于其他位置具有较大的压力振幅和压比。     

Influence of stabilizers on Na-β′′-Al2O3 phase formation in Li2O(MgO)-Na2O-Al2O3 ternary systems

The influences of stabilizers on - and -Al2O3 phase formations in Li2O(MgO)-Na2O-Al2O3 systems were investigated. When stabilized with 4MgCO3Mg(OH)25H2O, most of the -Al2O3 phase formed below 1200°C and further - to -Al2O3 transformation with an increase of temperature was not observed. On the other hand, when stabilized with Li2CO3,-Al2O3 formation occurred by two steps. First, -Al2O3 was partly formed below 1200°C, and, second, noticeable transformation from -Al2O3 to -Al2O3 occurred at higher temperature ranges. It was shown that transient eutectic liquid in the Li2O-Na2O-Al2O3 system promoted the - to -Al2O3 transformation at higher temperatures. Uniform distribution of both Mg2+ and Li+ stabilizing ions enhanced -Al2O3 formation at low temperatures. In the Li-stabilized systems, however, homogeneous distribution of Li+ ions hindered both the formation of transient eutectic liquid and the second - to -Al2O3 phase transformation at high temperatures.     

A virtual reality system for arm and hand rehabilitation

This paper presents a virtual reality (VR) system for upper limb rehabilitation. The system incorporates two motion track components, the Arm Suit and the Smart Glove which are composed of a range of the optical linear encoders (OLE) and the inertial measurement units (IMU), and two interactive practice applications designed for driving users to perform the required functional and non-functional motor recovery tasks. We describe the technique details about the two motion track components and the rational to design two practice applications. The experiment results show that, compared with the marker-based tracking system, the Arm Suit can accurately track the elbow and wrist positions. The repeatability of the Smart Glove on measuring the five fingers’ movement can be satisfied. Given the low cost, high accuracy and easy installation, the system thus promises to be a valuable complement to conventional therapeutic programs offered in rehabilitation clinics and at home.     

ELASTOHYDRODYNAMIC LUBRICATION ANALYSIS OF LAYERED LINE CONTACT BY THE BOUNDARY ELEMENT METHOD

This paper presents a numerical routine to compute the contact characteristics of elastomer layered cylinders lubricated by isoviscous liquids. The indentation of the elastic layer is calculated from boundary integral equations which are solved by linear and quadratic boundary element methods for a finite plane model and a circular representation of the junction. The hydrodynamic equation is also transformed into a boundary integral equation and solved by Simpson's rule. Some factors which possibly affect numerical accuracy are examined. Examples for finite plane and circular layer are analysed with reference to parameters for printing press roller contact, in which results are obtained for the indentation, film thickness and liquid pressure, as well as internal stresses through the simultaneous solution of the elasticity and hydrodynamic equations. The results show that high precision is easily achieved and the method is efficient for such layered problems.     

Improvement of Dielectric and Interface Properties of CeO2 Buffer Layer by Using the Metal Seed Layer and N2 Plasma Treatment

In this paper, we investigated the feasibility of cerium oxide (CeO₂) films as buffers layer of MFIS (metal ferroelectric insulator semiconductor) type capacitors. CeO₂ layer were prepared by a two-step process of a low temperature film growth and subsequent RTA (rapid thermal annealing) treatment. By applying a cerium (Ce) metal seed layer of 4 nm, unwanted SiO₂ layer generation was successfully suppressed at the interface between the buffer layer and the Si substrate. After N₂ plasma treatment, the leakage current was reduced by about 2-orders. By employing a N₂ plasma treatment, we were able to successfully obtain good properties at the interface between the buffer layer and the Si substrate.