Fullerene Reactivity in an Oxygen Plasma

Fullerene reactivity in an oxygen plasma was measured and compared with those determined under the same conditions for a comprehensive set of 50 carbon materials. The possible reasons for the high plasma reactivity of the fullerene sample in an oxygen plasma are discussed.     

电工实践教学改革与实践

电工实践教学是培养大学生电类工程能力的重要环节，本文介绍我们以培养人才为中心在电工实习基地建设；实践教学内容，方法和手段等方面进行的改革与实践。     

Adsorption of 117mSn(Ⅳ)-EDTMP on hydroxyapatite and collagen

Some organic phosphines labeled with 117mSn(Ⅳ) have been provedpromising for imaging and pain palliation of bone tumor. In this paper, a prelimi-nary investigation on the adsorption characteristics of EDTMP (ethelenediaminete-tramethylene phosphoric acid) labeled with 117mSn(Ⅳ) on HA(hydroxyapatite) andcollagen, and an investigation on the adsorption mechanism of 117mSn(Ⅳ)-EDTMPon HA was presented.``     

SPAC系统中水热CO2通量光合作用的综合模型（Ⅱ）：模型验证

本文利用禹城综合试验站土壤－植物－大气连续体系综合观测场冬小麦田实测资料，对“SPAC系统中水热、CO2通量与光合作用的综合模型（Ⅰ）模型建立”一文所建立的模型土壤水分动态、蒸发蒸腾和冠层CO2通量等功能进行了验证，利用波文比观测水汽通量结果、土壤水分剖面监测结果分别与对模拟计算腾发量和土壤水分剖面的验证结果表明，模拟计算的腾发量和土壤水分剖面是比较准确的；将模拟的光合作用过程中的CO2通量与实测值对比表明，模拟值与实测值的变化趋势是一致的，但是数据上存在一定的差异，模拟光合作用过程和强度符合一般规律，总体说明，所建立的系统模型在上述功能的模拟上是可行的。     

发光二极管的研究现状与发展趋势

Ⅱ－Ⅵ族，Ⅲ－Ⅴ族化全物半导体是制作显示器件的重要材料，随着制作工艺日趋成熟，发光二极管已广泛地应用于 民经济各部门。要方要介绍了国内外发光二有管的研究两头和发展趋势。     

Developing maintainable expert systems using case-based reasoning

Abstract: Maintainability problems associated with traditional software systems are exacerbated in rule-based systems. The very nature of that approach — separation of control knowledge and data-driven execution — hampers maintenance. While there are widely accepted techniques for maintaining conventional software, the same is not true for rule-based systems. In most situations, both a knowledge engineer and a domain expert are necessary to update the rules of a rule-based system. This paper presents, first, an overview of the software engineering techniques and object-oriented methods used in maintaining rule-based systems. It then discusses alternate paradigms for expert system development. The benefits of using case-based reasoning (from the maintenance point of view) are illustrated through the implementation of a case-based scheduler. The main value of the scheduler is that its knowledge base can be modified by the expert without the assistance of a knowledge engineer. Since changes in application requirements can be given directly to the system by the expert, the effort of maintaining the knowledge base is greatly reduced.     

城市道路SMA面层配合比优化的影响因素及对策

以路用性能为控制指标，选择满足技术质量指标要求的原材料，对SMA改性沥青混合料的配合比设计进行优化，以期找到最佳路用性能和经济指标的SMA改性沥青混合料配合比的影响因素及对策。研究表明，对级配和体积指标等满足有关要求的特定原材料，其混合料最优路用性能只有在粗集料形成骨架嵌挤密实稳定，其空隙恰好被细集料等组成的胶结料所填充时，即VCADRC-VCAmix值趋向于0（＋）才充分体现出来；同时，在满足各项控制指标的前提下，可以通过适当增大2.36mm集料通过率来进一步提高混合料的抗车辙和稳定性能。     

压裂斜井时射孔处雁形裂缝产生及干扰分析

在已射孔的斜井压裂过程中，射孔孔眼处会出现一系列的几乎相互平行的雁形裂缝。这些裂缝的延伸、连接受到地层应力及裂缝本身的影响，情况较为复杂，但它们的延伸和连接对压裂的成功与否至关重要。笔者对裂缝模型进行简化，将复变函数理论与位错理论相结合，并且考虑了裂缝表面有流体压力作用且裂缝之间存在相互干扰的情况下，建立了无限大介质中裂尖应力强度因子的数学模型，利用该模型可对雁型裂缝之间的相互干扰进行力学分析。应用数值方法对所建立的数学模型求解，得到裂尖的应力强度因子及转角，来预测裂缝连接情况。该结果可用来指导压裂井的射孔施工。     

丝织生产中对罗纹筒的防除浅析

罗纹筒是织绸生产厂准备工序常见主要疵点之一。笔者通过对生产现场实际观察分析认为：翻丝机、络丝机的摩擦滑移、挡车工操作不当、温湿度不合适等是产生罗纹筒的主要原因。下面就罗纹筒的产生和预防谈一些粗浅认识。