Advanced partial encryption using watermarking and scrambling in MP3

In this paper, we propose an advanced partial encryption of watermarking and scrambling using the magnitude information of Modifed Discrete Cosine Transform (MDCT). In MPEG-1/Audio Layer III (MP3), the magnitude and phase information of modified discrete cosine transform (MDCT) coefficients is encrypted. The proposed method uses both watermarking and scrambling, and aims at protecting the contents against eavesdropping and moreover against illegal mass distribution after descrambled. Experimental results show that the proposed method can achieve higher security and less computational complexity by reusing the MDCT coefficients obtained in MP3.     

Preparation and Photoluminescence of Partially Filled ZnO Microtubes Using Block Copolymers

Partially filled ZnO microtubes were synthesized in large scale using block copolymers. The growth mechanism of this unique construction is proposed on the basis of adsorption of block copolymers on {0002} plane of wurtzite ZnO. The photoluminescence property of these unique ZnO microtubes is also studied using a Xe lamp as the excitation source at room temperature. Blue emission band at 425 nm is a much stronger ultraviolet emission band, which is due to laminar structure of ZnO microtubes.     

Determination and correlation solubility of 4-nitroimidazole in twelve pure solvents from 278.15 K to 323.15 K

In this paper, the solubility of 4-nitroimidazole in twelve pure solvents (toluene, benzene, 1,4-dioxane, acetonitrile, ethyl acetate, acetone, GBL, ethanol, methanol, n-butanol, DMF and NMP) were determined by using the laser monitoring system from 278.15 K to 323.15 K under 101.1 kPa, which are 0.00018-0.00070, 0.00021-0.00073, 0.00034-0.00092, 0.00038-0.00142, 0.00047-0.00120, 0.00126-0.00303, 0.00225-0.00517, 0.00310-0.00724, 0.00467-0.00982, 0.00453-0.01940, 0.01947-0.04652, and 0.04670-0.07452, respectively. At constant temperature, the mole fraction solubility of 4-nitroimidazole were increased as the following order: toluene < benzene < 1,4-dioxane < (ethyl acetate or acetonitrile) < acetone < GBL < ethanol < (methanol or nbutanol) < DMF < NMP, and the solubility of 4-nitroimidazole in (ethyl acetate, acetonitrile) and (methanol, n-butanol) had an intersection point at 297.55 K and 281.85 K, respectively. The solubility of 4-nitroimidazole could be increased with increasing temperature in twelve pure solvents. The ideal model, modified Apelblat equation, polynomial empirical equation, and λh equation were used to correlate the experimental values. The experimental solubility values were employed to calculate the standard dissolution enthalpy, standard dissolution entropy and Gibbs energy. The dissolution of 4-nitroimidazole could be an endothermic process in twelve pure solvents. The determination and fitting solubility of 4-nitroimidazole have important guiding significance for the purification and crystallization of its preparation process.     

浅析加快300 MW机组启动速度的方法及措施

随着电网的装机容量日益增大,机组的启动次数也在逐日增多。从保证机组安全经济运行的角度出发,结合笔者直接或间接参与制定的技术措施,简要分析了影响机组启动速度的因素和改善措施,以期为其他发电厂在机组启动方面提供一些参考和建议。     

基于MAX+PLUSII模块化设计的智力竞赛抢答器

设计了一款造价低,体积小,操作简单,适用性广的抢答器。该抢答器是基于MAX+PLUSII软件,在FPGA芯片上设计的,可实现多人智力竞赛抢答。     

柴油机自动减压起动装置的有限元分析

分析了柴油机自动减压装置的工作原理,针对在潍柴WP10型柴油机上加装的减压装置,利用Solidworks Simulation对压板进行了静力分析,找出了应力最大的部位和最大值,并按照Von Mises准则,判别压板满足刚度要求。     

面向新产品开发市场定位的一种聚类算法*

如何从海量的样本数据中挖掘出具有共性的顾客需求信息,帮助商家识别出潜在的客户群,并提高对市场活动的响应效率,是当前国内外市场研究的一个重点和难点。以新产品开发策划中的新产品市场定位为研究对象,提出了一种基于网格的聚类算法(meshbased clustering algorithm, MCA)。此算法可以在市场调查数据中深度挖掘顾客潜在需求,根据顾客评价对产品进行竞争性分析,采用积极的营销策略,不断挖掘新客户群体,从而为企业制定新产品开发战略和产品市场定位提供科学决策依据。     

双回转送进二辊冷轧管机凸轮设计研究

本文提出了双回转送进二辊冷轧管机凸轮理论轮廓曲线的新设计方法 ,其轮廓曲线加速度与跃度呈梯形 ,且跃度边界连续 ,给出了针对双回转送进二辊冷轧管机的两个过渡段具有等加速度和跃度的设计准则     

用双层辉光等离子法在钛表面制备的Ti-Pd合金层性能研究

采用双层辉光等离子冶金技术在纯钛表面制备了Ti—Pd合金层。其深度大约为90μm，Pd含量呈梯度变化，并出现了TiPd3，TiPd2，Ti2Pd3，Ti3Pd5，TiPd，Ti4Pd等6种化合物相和Pd相。合金层在100℃的NaCl饱和溶液＋HCl溶液以及40℃的8．6％H2SO4溶液中的耐缝隙腐蚀性能优于Ti0．2Pd合金；在室温80％H2SO4的溶液中，腐蚀速率仅为0．682mm／a，是Ti0．2Pd合金的18．2％：在室温30％HCl的溶液中，表面Ti—Pd的腐蚀速率仅为0．004mm／a，是Ti0．2Pd合金的12．5％。     

UNHEALED POROSITIES AND CRYSTALLINE STEPS IN FLAKES

在结构钢的白点断口中,用立体显微镜有时可以观察到沿轧制方向的暗线条;用扫描电子显微镜进行高倍观察则为未轧合的疏松残留下来的长条形空隙,内壁光滑,保留有露头枝晶、结晶台阶、显微孔洞等结晶形貌。这种空隙很可能是白点断口的一种断裂源。