一种测量建筑材料和土壤氡面析出率的新方案

在分析了直接测量法测量氡面析出率的原理和影响测量效果各因素的基础上，对建筑材料、土壤氡面析出率的测量方案进行了探讨，并提出了一种新的测量方案。该方案能够较好地克服氡面析出率测量中各种因素的影响，并且具有装置简单、可大批量重复测量、成本低等优点。     

支持下一代无线宽带应用自适应QoS模型的研究

作为真正完整的下一代网络 ( NGN,Next Generation Network)解决方案 ,NGN需要在固定通信领域和移动通信领域都能够支持综合多媒体特性。NGN中的新一代移动通信网承载在开放式、层次化结构的分组交换网络之上 ,能够为用户提供端到端的 Qo S解决方案。本文分析了下一代移动通信系统中多媒体宽带应用的 Qo S问题 ,从无线通信系统的多层次结构出发 ,建立了业务流的 Qo S指标评判体系 ,为下一代网络中的无线宽带应用提供了一种自适应Qo S控制模型     

Bioeffects of Low Energy Ion-Beam Implantation and Vacuum Treatment on M1 Arabidopsis Thaliana

Vacuum treatment and ion-beam bombardment are two major processes in the low energy ion-beam implantation. To accurately study the contributions of these two major factors to the bioeffects separately, the M1 generation variation of Arabidopsis thaliana with ion-beam implantation and vacuum treatment were compared through a series of key plant development parameters including morphological observation, biochemical assay and RAPD （random amplified polymorphic DNA） analysis. The results showed that ion-beam implantation had obvious effect on almost all of these parameters, and the vacuum treatment had some impacts on several morphological parameters such as the bolting time and the length of the primary stem. Taking the results together, the indication is that vacuum treatment has some slight contributions to the bioeffects of ion-beam implantation while ion-beam bombardment itself is the major creator of the bioeffects.     

基于SHARC数字脉压系统的设计与实现

详细介绍了采用两片浮点DSP ADSP21062实现某舰载雷达所需要完成的舰速补偿、反异步干扰和脉冲压缩的系统研制。通过采用分段匹配滤波的方法，极大地节约了时间和空间。与完成同样功能采用单片TMS320C6701的设计相比，本设计具有外围电路简单、系统调试容易等优点。     

Ni的添加对TiB2-CU基复合材料微观组织的影响

利用燃烧合成工艺原位合成了TiB2-Cu基复合材料，为了改善TiB2陶瓷和Cu基体的润湿性，将金属Ni作为合金化元素加入到TiB2-Cu复合材料。通过XRD，SEM，EPMA和TEM等检测手段对金属Ni的添加对TiB2-Cu基复合材料微观组织的影响进行了研究。结果表明，含Ni复合材料的金属粘结相的面间距比不含Ni时Cu的面间距均有不同程度的减小；Ni加入后，TiB2-Cu-Ni复合材料的组织较TiB2-Cu复合材料更加致密，但陶瓷颗粒尺寸却大于TiB2-Cu复合材料的颗粒尺寸；Ni的加入降低了复合材料的导热率和冷却速度，使得部分TiB2陶瓷颗粒有足够的时间长成棒状，同时造成TiB2陶瓷颗粒间形成更多的烧结颈；Ni的加入也改善了陶瓷与金属粘结相之间的润湿性，使陶瓷相与金属粘结相的界面结合牢固，看不到TiB2-Cu复合材料中界面脱开的现象。金属Ni的添加有利于改善TiB2-Cu基复合材料的微观组织，进而利于复合材料的致密化。     

Sol-gel Preparation and Preliminary in vitro Evaluation of Fluorapatite／Hydroxyapatite Solid Solution Films

Fluorapatite/hydroxyapatite solid solution has better biological properties than other apatites, especially used as films or coatings. In this work, sol-gel preparation and in vitro behavior of fluorapatite/hydroxyapatite solid solution films on titanium alloy were investigated. Ca(NO3)2-4H20 and PO(OH)x(OEt)3-x were selected as precursors, and hexafluorophosphoric acid (HPFo) was used as a fluorine containing reagent. The Ca and P precursors were mixed with HPFo to keep the Ca/P molar ratio 1.67. The mixtures refluxed for 12 h were used as dipping sols for the preparation of the films. The phase of the films obtained at 600℃ was apatite. The F contents in the films increased with the concentrations of HPF6 in the dipping sols. The solid solution films were shown to have better stability than hydroxyapatite films, and a reasonably good bioactivity in the in vitro evaluation.     

Effect of Substrate Bias on Microstructure and Properties of Tetrahedral Amorphous Carbon Films

The microstructure and properties of tetrahedral amorphous carbon (ta-C) films deposited by the filtered cathodic vacuum arc technology has been investigated by visible Raman spectroscopy, AFM and Nano-indentor. The Raman spectra have been fitted with a s     

采用注视控制器实现复杂运动的仿真

注视控制器是3DS MAX软件的众多控件之一，它能使多个物体彼此间产生运动约束。通过使用注视控制器功能，笔者成功制作出八足爬壁式仿生机械昆虫的运动场景动画，并使该仿生机械昆虫各足的行走动作符合机械零件作平面复杂运动时所应遵守的正确运动规律。由此证明，3DS MAX软件注视控制器对正确模拟特殊机械装置的复杂运动可产生极大作用。     

A generalized equation for the prediction of melting temperatures of homopolymers and copolymers

A generalized equation was derived to calculate the melting temperatures of homopolymers and copolymers. The Gibbs‐Thomson equation for homopolymers and a modified application to copolymers were derived using the proposed equation. The melting temperature T_m⁰ in the Flory equation corresponds to the melting temperature T_m^C,∞ of copolymer crystals with stems of infinite length. Also, T_m^C,n*, the melting temperature for copolymer crystals with stems containing the maximum possible number of structural units, n*, should be used instead of T_m⁰ as the basis of supercooling in crystallization. The proposed equation shows good agreement with experimental data for α‐alkene‐ethylene homogeneous copolymers.     

基于VXI总线的机载火控系统自动测试仪的设计

目的　对作战飞机火控系统的故障检测 ,传统的方法是使用多种检测仪器对机载火控设备进行性能检查 ,不仅技术含量低 ,也给飞机转场后技术阵地的转移带来不便 ,不能满足现代战争的需要 ,为提高战机的作战效能和快速反应的能力 ,研制了机载火控系统自动测试仪 .方法　采用 VXI总线技术、合理的硬件配置和在 Lab Windows/CVI环境下的软件模块化设计方案 .结果　在实际应用中取得了良好效果 ,为技术人员进行机载火控系统的性能及故障检测提供了便利 .结论　该测试仪具有测试结果准确 ,自动化程度高 ,工作稳定可靠 ,操作简便 ,易于转移和维护等优点 ,并具有较高的抗干扰能力 ,不仅适用与内场 ,还可用于在外场对机载火控系统进行原位检测