烟用香料配制的气相色谱法质量控制研究

采用气相色谱法对香料房卷烟用料液中的溶剂及水分进行检测,分析测定其中的水分、乙醇、丙二醇、山梨醇等的含量,通过对香料房每批配制料液的抽检,可以跟踪料液配制的准确性,保证卷烟产品质量,该方法操作简单、准确性高、重现性好。     

二氧化氯处理油田回注水工艺

针对中原油田回注水中细菌易产生抗药性,难以控制的问题,提出了应用二氧化氯处理油田回注水工艺。经室内评价及现场试验,二氧化氯可杀死回注水中的细菌,控制微生物生长,同时该工艺可降低现有回注水污泥残渣产出量的50%,减少污泥对环境的污染,提高注水水质。     

Feature-based classifiers for design optimization

We present a design optimization method for systems with high-dimensional parameter spaces using inductive decision trees. The essential idea is to map designs into a relatively low-dimensional feature space, and to derive a classifier to search for high-performing design alternatives within this space. Unlike learning classifier systems that were pioneered by Holland and Goldberg, classifiers defined by inductive decision trees were not originally developed for design optimization. In this paper, we explore modifications to such classifiers to make them more effective in the optimization problem. We expand the notions of feature space, generalize the tree construction heuristic beyond the original information-theoretic definitions, increase the reliance on domain expertise, and facilitate the transfer of design knowledge between related systems. There is a relatively small but rapidly growing body of work in the use of inductive trees for engineering design; the method presented herein is complementary to this research effort.     

丙烯腈急冷塔喷淋系统流道分析与优化

对国内现有丙烯腈装置急冷塔循环液喷淋器的分流流道进行了研究。对喷头堵塞情况作了理论分析，并运用计算机编程模拟计算出喷淋器中各喷头的流体分布情况。在此基础上提出了分流流道的优化方案，从而改善了急冷塔内的操作状况，减少了丙烯腈在急冷塔内的损失。     

AN improved method of optimization for electrical machines

Methods of optimizing the design of electrical machines are discussed. The augmented Lagrangian multiplier method is described, and an algorithm for this method is introduced. The method is compared with the more familiar exterior penalty function method using, as an example, the cost optimization of permanent magnetic variable-speed drive motors. The improved method is shown to be superior, both in its ability to reach an optimum consistently and in the number of required iterations     

南海北部陆缘晚期油气成藏机理及动力学过程

总结了南海北部陆缘晚期(或浅层)油气藏的勘探技术和方法,指出晚期油气成藏具有海底麻坑、气烟囱、"地震模糊带"和"亮点"等地震异常特征,从地化特征上可划分为浅层生物气、成熟—高成熟热解气和高含CO₂热解气等3种油气成藏类型.在研究新构造运动表现形式的基础上,分析了逆断层、正断层和底辟—走滑断层3个断层活动区的晚期油气成藏机理,指出断层晚期活动和后期快速沉降促进了油气的运移和再分配,晚期油气成藏主要沿莺歌海盆地莺东斜坡带、东方—乐东区和沿琼东南盆地二号断裂带及珠江口盆地坳陷边缘斜坡带等分布,有利于油气和天然气水合物的勘探.      

MIKEII 软件系统在穆棱河流域面源污染估算中的应用

穆棱河流域面源污染入河量调查和估算采用了MIKEII软件系统，根据水质、水量实测数据，在参数率定和模型验证的基础上．对穆棱河部分河段的水质进行模拟，拟合出面源入河量和年内分布。经验证计算结果较其他方法更合理可靠。     

氮气氛下LTCC基板Cu共烧金属化研究

从PMMA型LTCC素坯膜的制备和PMMA的排胶机理两方面，研究了LTCC基板Cu共烧金属化。结果表明，采用PMMA作为粘结剂的流延浆料具有剪切变稀行为，所得的流延坯膜微观组织均匀，叠压后坯体内部无分层现象。热失重、差热和傅立叶红外光谱联用分析结果表明高纯N2气氛中PMMA以解聚机理热解，热解后释放的主要产物为丙烯酸甲酯。在高纯N2气氛中LTCC与Cu共烧后Cu金属化膜平整、致密，连通良好。经测试，基板表面Cu导体方阻小于5mΩ/□。