冶金炉渣氮化物容量研究的进展

本文总结了近年冶金炉渣氮酸盐容量的研究方法，氮在炉渣中存在形态与炉渣氧分压的关系，炉渣氮化物容量与温度及炉渣成分的关系，并给出设计钢液脱氮渣系的基本原则。     

Void fraction and pressure drop in two-phase liquid metal flows in channels

Experimental results on void fraction and friction pressure drop in vapour-potassium flows in the high-vapour-quality region up to unity are presentéd. The experimental data obtained and the pertinent results of other authors are generalized, and empirical relationship are suggested to calculate void fraction and pressure drop in two-phase liquid metal flows for channels of various configurations and orientations. The relationships are valid within the range of vapour qualities from almost zero to unit. The experimental data prove the mass velocity to have no influence on the hydrodynamic characteristics within the range of the parameters investigated. It is found in the experiments with heat supply that friction pressure losses are smaller than those for adiabatic conditions. It is shown that this result is in good correspondence with the model of the effect of injection in a boundary layer on the value of shear stresses between cases.     

Dynamic lithium-ion battery model for system simulation

Presents here a complete dynamic model of a lithium ion battery that is suitable for virtual-prototyping of portable battery-powered systems. The model accounts for nonlinear equilibrium potentials, rate- and temperature-dependencies, thermal effects and response to transient power demand. The model is based on publicly available data such as the manufacturers' data sheets. The Sony US18650 is used as an example. The model output agrees both with manufacturer's data and with experimental results. The model can be easily modified to fit data from different batteries and can be extended for wide dynamic ranges of different temperatures and current rates.     

Process development and adhesion behavior of electroless copper on liquid crystal polymer (LCP) for electronic packaging application

Liquid crystal polymer (LCP) has potentially a very wide application as substrate material in electronic packaging applications because of its unique advantages. The work in this paper was performed to realize the metallization of LCP for the purpose of board fabrication, and to study the adhesion between deposited copper and LCP. A homogenous electroless plated copper layer on LCP with 4 to 5 /spl mu/m thickness was achieved, while it increased up to 40 /spl mu/m with the subsequent electroplating. The timescale of etching, deposit ion rate, and pH value were gradually changing during the plating process and the influences on copper layer quality were investigated. The adhesion force of the copper-LCP layer system was measured by a shear-off-method. Scanning electron microscopy (SEM) was used to check the surface morphology after etching and the interface after shearing on both the backside of the copper layer and the LCP side. The relationship between the shear-off adhesion of copper and the time of chemical etching before plating was examined, and the optimal etching time is discussed. Heat treatment after plating was used, and it was shown that this significantly improved the adhesion strength.     

牙鲆淋巴囊肿病的PCR诊断方法研究

以中国养殖牙鲆 (Paralichthysolivaceus)淋巴囊肿病毒 (Lymphocystisdiseasevirus,LCDVcn)主要衣壳蛋白 (majorcapsidprotein ,MCP)基因的中间保守序列为目标基因 ,设计了一对特异性引物。该引物可扩增出 172bp的病毒DNA片段 ,其最小DNA检出量为 0 0 183ng。用PCR法从人工感染淋巴囊肿病毒 3天的牙鲆血、鳃、肝、脾、肠、胃及自然发病牙鲆的肿瘤中 ,分别检测到了LCDV的存在。本实验结果证明 ,PCR法对于早期检测LCDV是十分有效的。     

柔性冗余度机器人残余振动主动控制

研究柔性冗余度机器人的残余振动主动控制问题，设计了具有压电作动器与应变传感器的机敏杆件，建立了受控系统的状态空间表达式，采用独立模态空间控制理论设计LQR状态反馈控制器，并基于对偶原理设计了具有指定收敛特性的Luenberger全维状态观测器，最后，以平面3R柔性冗余度机器人为例进行了计算机仿真，结果表明，采用这种主动控制方法可以显著改善柔性冗余度机器人的动力学品质。     

Prediction of processing-induced distortion of curved flanged composite laminates

It is well known that angles in composite parts contract as they are cooled down from the curing temperature, this is often referred to as spring-in. It is caused mainly by the significantly different thermal contractions and cure shrinkage's experienced between the fibre direction and the through-thickness direction during the manufacturing process. A number of works have reported on the spring-in of straight angle composite parts. However, little has been done to investigate the distortion of curved flanged composite parts, which will distort differently owing to the introduction of the additional curvature, thus constraint.

In the present work, the distortion of the circularly curved flanged laminates is studied numerically. The finite element method is used to predict the processing-induced distortion of the part with two different approaches. In the first approach, the shear angles of the composite plies are predicted by a draping analysis. The effect of the fibre shearing on the mechanical properties of the laminates is considered in the model used to predict the distortion. The second simplified approach assumes that the in-plane properties of the laminates are isotropic. The results obtained by these two approaches are compared with those obtained experimentally.     

抗氧剂于有机PTC热敏导电材料性能的稳定作用研究

探讨了抗氧剂在聚乙烯 乙烯 醋酸乙烯酯共聚物 炭黑 (PE EVA CB)体系中的作用。结果表明 ,在体系中加入抗氧剂可以提高材料体系的结构稳定性 ,从而可以在一定程度上改善材料的热电稳定性。当在体系中加入 2 .0 %(w)的抗氧剂时可收到良好效果。