A Strategy of Liquid-Grafted Slippery Sponges with Simultaneously Enhanced Absorption and Desorption Performances for Crude Oil Spill Remediation

Crude oil spill accidents pose a worldwide environmental threat. Oleophilic and hydrophobic absorbents that can selectively absorb oil from water have shown promising application potential in oil spill remediation. Simultaneous optimization of the absorption and desorption speed of absorbents towards oil is highly desirable for their recyclable usage, but remains a great challenge, because these two properties are generally conflicting. Here, a facile and ingenious strategy is proposed to tackle the above challenge via surface modification of porous sponges with highly flexible linear polydimethylsiloxane (LPDMS) brushes. The LPDMS brushes feature liquid-like properties at room temperature owing to its extremely low glass transition temperature, and act as a covalently-grafted lubrication layer throughout the 3D network channels of the sponge, which can minimize contact angle hysteresis and reduce friction between oil and sponge channel. Compared to the prevalent cross-linked polydimethylsiloxane (CPDMS) modification strategy, sponges modified with LPDMS brushes not only shows significantly enhanced absorption speed, but also exhibits superior desorption dynamics towards viscous crude oils. The design strategy of slippery sponges with liquid-like molecules may open a new avenue for developing advanced absorbents with simultaneously enhanced absorption and desorption performances for liquid separation and purification applications.     

Preparation and Bioactivity of Iridium(III) Phenanthroline Complexes with Halide Ions and Pyridine Leaving Groups

A series of half-sandwich structural iridium(III) phenanthroline (Phen) complexes with halide ions (Cl⁻, Br⁻, I⁻) and pyridine leaving groups ([(η⁵-Cp^X)Ir(Phen)Z](PF₆)_n, Cp^x: electron-rich cyclopentadienyl group, Z: leaving group) have been prepared. Target complexes, especially the Cp^xbiph (biphenyl-substituted cyclopentadienyl)-based one, showed favourable anticancer activity against human lung cancer (A549) cells; the best one ( Ir8 ) was almost five times that of cisplatin under the same conditions. Compared with complexes involving halide ion leaving groups, the pyridine-based one did not display hydrolysis but effectively caused lysosomal damage, leading to accumulation in the cytosol, inducing an increase in the level of intracellular reactive oxygen species and apoptosis; this indicated an anticancer mechanism of oxidation. Additionally, these complexes could bind to serum albumin through a static quenching mechanism. The data highlight the potential value of half-sandwich iridium(III) phenanthroline complexes as anticancer drugs.     

HZSM5分子筛膜复合二氧化锡对甲烷的气敏性能研究

采用液相氧化法制备二氧化锡纳米颗粒,并利用浸渍法制备Pd负载二氧化锡纳米材料,通过丝网印刷得到气敏传感膜并在其表面印刷分子筛层。基于动态气敏测试系统探究传感器对甲烷气体的灵敏度及其在CO和乙醇干扰气体下的选择性。研究结果表明,在Pd-SnO₂敏感层表面印刷Pd-HZSM5层后,传感器对甲烷的响应能力显著提高,并且在体积分数为5×10^-4的CO存在时,对甲烷的选择性也得到明显的提升。同样,在质量分数为2×10^-5乙醇的存在下,传感器对甲烷的响应也没有受到干扰。通过对分子筛进行表征和催化分析,发现Pd-HZSM5对CO的催化效率可达100%,使得CO在扩散过程中被催化氧化,这可能是印刷Pd-HZSM5分子筛膜从而提高传感器选择性的主要原因。同时研究还表明,在敏感层表面印刷分子筛层并不会影响传感器的响应和恢复速率。     

岩溶区石灰石矿山溶洞探测分析

江西南城南方水泥有限公司蒋源矿区矿山开采过程中发现了溶洞,并利用空洞仪（一种物探设备）对溶洞探测并采集数据以及使用RTK对溶洞分布情况进行坐标数据采集。经过对空洞仪成像分析,结合现场采集的数据制作出溶洞空间分布图,精确掌握溶洞发育的规模、空间状态,对制定岩溶发育区域矿山开采、爆破施工方案、应急预案,以及确保施工安全起到了非常重要的作用。     

Effect and Evolution of Oxide Film in the HDH-Ti Powder Surface on Densification Behavior During Sintering

Metallurgical and Materials Transactions A - In this work, we used hydride-dehydride Ti (HDH-Ti) powders (with the oxygen levels of 0.17 and 0.51 wt pct, respectively) combined with microstructural...     

日本超高温结构用金属材料的研究现状

简要介绍了日本围绕燃气轮机用关键超高温金属结构材料所展开的研究开发工作,包括Ni基超合金、耐热金属间化合物、Nb基超合金及其复合材料。Ni基超合金仍是当前燃气轮机用超高温结构的主要材料,但其使用温度的上升潜力已经不多,用新的超高温材料替代Ni基超合金是燃气轮机用材的发展趋势,金属材料中耐热金属间化合物和Nb基复合材料是今后关注的焦点。     

Mold-filling characteristics of AZ91 magnesium alloy in the low-pressure expendable pattern casting process

The magnesium (Mg) alloy low-pressure expendable pattern casting (EPC) process is a newly developed casting technique combining the advantages of both EPC and low-pressure casting. In this article, metal filling and the effect of the flow quantity of inert gas on the filling rate in the low-pressure EPC process are investigated. The results showed that the molten Mg alloy filled the mold cavity with a convex front laminar flow and the metal-filling rate increased significantly with increasing flow quantity when flow quantity was below a critical value. However, once the flow quantity exceeded a critical value, the filling rate increased slightly. The influence of the flow quantity of inert gas on melt-filling rate reveals that the mold fill is controlled by flow quantity for a lower filling rate, and, subsequently, controlled by the evaporation of polystyrene and the evaporation products for higher metal velocity. Meanwhile, the experimental results showed that the melt-filling rate significantly affected the flow profile, and the filling procedure for the Mg alloy in the low-pressure EPC process. A slower melt-filling rate could lead to misrun defects, whereas a higher filling rate results in folds, blisters, and porosity. The optimized filling rate with Mg alloy casting is 140 to 170 mm/s in low-pressure EPC.     

我国压力铸造技术的现状与发展

概述了压力铸造技术的特点,总结了目前中国压铸技术与国外的差距,分析了我国压铸业面临的机遇和挑战,论述了压力铸造技术的新工艺以及今后压力铸造的研发方向.     

一种并行工程信息集成框架的构建

本文针对现有的并行工程信息集成框架对并行工程只提供消极支持的问题展开讨论，通过技术域，支撑域，管理域三个域的建立与分析，特别是对ＣＦ积极支持方法进行探讨，提出一种推拉式的建模思想，实现对并行设计的监督和控制。并依此思想建立了一个ＣＥ信息集成框架。     

氧化剂对Cu-Al2O3复合材料微观组织的影响

研究了一种新型简化内氧化工艺,并制备了不同氧源系数的Cu-Al2O3复合材料。用SEM、TEM等分析手段对所制备复合材料烧结态的微观组织进行了研究。结果表明,该简化工艺成功制备了Cu-Al2O3复合材料,在铜基体上弥散分布着大量细小的γ-Al2O3颗粒,其粒径为5~20nm,颗粒间距为25~60nm,当氧源系数(k)为1.20时,压制粉末经烧结(950℃,4h)后全部完成内氧化,此氧化剂含量为最佳的内氧化氧化剂添加量。