Life cycle assessment of Jatropha biodiesel as transportation fuel in rural India

Since 2003 India has been actively promoting the cultivation of Jatropha on unproductive and degraded lands (wastelands) for the production of biodiesel suitable as transportation fuel. In this paper the life cycle energy balance, global warming potential, acidification potential, eutrophication potential and land use impact on ecosystem quality is evaluated for a small scale, low-input Jatropha biodiesel system established on wasteland in rural India. In addition to the life cycle assessment of the case at hand, the environmental performance of the same system expanded with a biogas installation digesting seed cake was quantified. The environmental impacts were compared to the life cycle impacts of a fossil fuel reference system delivering the same amount of products and functions as the Jatropha biodiesel system under research. The results show that the production and use of Jatropha biodiesel triggers an 82% decrease in non-renewable energy requirement (Net Energy Ratio, NER = 1.85) and a 55% reduction in global warming potential (GWP) compared to the reference fossil-fuel based system. However, there is an increase in acidification (49%) and eutrophication (430%) from the Jatropha system relative to the reference case. Although adding biogas production to the system boosts the energy efficiency of the system (NER = 3.40), the GWP reduction would not increase (51%) due to additional CH₄ emissions. For the land use impact, Jatropha improved the structural ecosystem quality when planted on wasteland, but reduced the functional ecosystem quality. Fertilizer application (mainly N) is an important contributor to most negative impact categories. Optimizing fertilization, agronomic practices and genetics are the major system improvement options.     

Hydro‐ethanolic extract of cashew tree (Anacardium occidentale) nut and its principal compound,anacardic acid,stimulate glucose uptake in C2C12 muscle cells

Scope: Products of cashew tree (Anacardium occidentale) are used in traditional medicine for various ailments, including diabetes. Methods and results: The anti‐diabetic properties of cashew plant parts were studied using differentiated C2C12 myoblasts (myotubes) and rat liver mitochondria. Hydroethanolic extract of cashew seed (CSE) and its active component, anacardic acid (AA), stimulated glucose transport into C2C12 myotubes in a concentration‐dependent manner. Extracts of other parts (leaves, bark and apple) of cashew plant were inactive. Significant synergistic effect on glucose uptake with insulin was noticed at 100 μg/mL CSE. CSE and AA caused activation of adenosine monophosphate‐activated protein kinase in C2C12 myotubes after 6 h of incubation. No significant effect was noticed on Akt and insulin receptor phosphorylation. Both CSE and AA exerted significant uncoupling of succinate‐stimulated respiration in rat liver mitochondria. Conclusion: Activation of adenosine monophosphate‐activated protein kinase by CSE and AA likely increases plasma membrane glucose transporters, resulting in elevated glucose uptake. In addition, the dysfunction of mitochondrial oxidative phosphorylation may enhance glycolysis and contribute to increased glucose uptake. These results collectively suggest that CSE may be a potential anti‐diabetic nutraceutical.     

Chronic obstructive pulmonary disease in patients with end‐stage kidney disease on hemodialysis

The objectives of this study were to assess the prevalence of chronic obstructive pulmonary disease (COPD) in hemodialysis patients with spirometry and to examine the effects of fluid removal by hemodialysis on lung volumes. Patients ≥18 years at two Danish hemodialysis centers were included. Forced expiratory volume in one second (FEV₁), forced vital capacity (FVC), and FEV₁/FVC ratio were measured with spirometry before and after hemodialysis. The diagnosis of COPD was based on both the GOLD criteria and the lower limit of normal criteria. There were 372 patients in treatment at the two centers, 255 patients (69%) completed spirometry before dialysis and 242 of these (65%) repeated the test after. In the initial test, 117 subjects (46%) had airflow limitation indicative of COPD with GOLD criteria and 103 subjects (40.4%) with lower limit of normal criteria; COPD was previously diagnosed in 24 patients (9%). Mean FVC and FEV₁ decreased mildly after dialysis (FVC: 2.84 to 2.79 L, P < 0.01. FEV₁: 1.97 to 1.93 L, P < 0.01) Hemodialysis did not affect the FEV₁/FVC ratio or number of subjects with airflow limitation indicative of COPD (113 vs. 120, P = 0.324; n = 242). COPD is a frequent and underdiagnosed comorbidity in patients on chronic hemodialysis. Spirometry should be considered in all patients on dialysis in order to address dyspnea adequately. Hemodialysis induced a small fall in mean FEV₁ and FVC, which was more pronounced in patients with little or no fluid removal, but the FEV₁/FVC ratio and the number of subjects with airflow limitation indicative of COPD were not affected by dialysis.     

Analysis of reactions during sintering of CuO-doped 3Y-TZP nano-powder composites

3Y-TZP (yttria-doped tetragonal zirconia) and CuO nano powders were prepared by co-precipitation and copper oxalate complexation–precipitation techniques, respectively. During sintering of powder compacts (8 mol% CuO-doped 3Y-TZP) of this two-phase system several solid-state reactions clearly influence densification behaviour. These reactions were analysed by several techniques like XPS, DSC/TGA and high-temperature XRD. A strong dissolution of CuO in the 3Y-TZP matrix occurs below 600 °C, resulting in significant enrichment of CuO in a 3Y-TZP grain-boundary layer with a thickness of several nanometres. This “transient” liquid phase strongly enhances densification. Around 860 °C a solid-state reaction between CuO and yttria as segregated to the 3Y-TZP grain boundaries occurs, forming Y₂Cu₂O₅. This solid-state reaction induces the formation of the thermodynamic stable monoclinic zirconia phase. The formation of this solid phase also retards densification. Using this knowledge of microstructural development during sintering it was possible to obtain a dense nano–nano composite with a grain size of only 120 nm after sintering at 960 °C.     

When NHC Ligands Make a Difference in Gold Catalysis

Thanks to their unique electronic and steric properties, carbene ligands offer highly valuable features for catalysis, including homogenous gold catalysis. The use of carbene-gold complexes has improved existing reactions, either by modifying reactivity modes or by leading to highly asymmetric processes. These topics will be discussed on the basis of selected examples.     

Polyethylene as an Additive for Mineral Oils — Part II: EHL Traction Behavior

In Part I of the paper ((1999), Trib. Trans., 42, pp. 851–859) we investigated the effect of the polyethylene concentration on the film forming properties in a rolling bearing. This second part presents the influence of the polymer additive concentration on the traction behavior experienced using a two-disk machine at different temperatures and contact pressures.

By using the traction data, a semi-empirical approach for determining the effective lubricant theological parameters in EHL contacts was performed. Using this approach, the effect of polymer concentration upon rheological parameters that appear in the Johnson and Tevaarwerk model with Eyring stress was quantified.