Studies on crystal morphology and crystallization kinetics of polypropylene filled with CaCO3 of different size and size distribution

Changes in the crystal morphology, crystallinity, and the melting temperature of thermoplastics resulted in significant changes in the mechanical behavior of composites containing them. For this reason, the research of crystal morphology and crystallization kinetics in thermoplastic composites became an important requirement. The thermoplastic filled with the filler of different size gradation was a new method for improving processability of thermoplastic composites. We have previously reported that the melt viscosity of polypropylene (PP) composites, which were filled with 30 wt % CaCO₃ of effective size gradation, could be evidently declined. In this study, two sizes of CaCO₃, 325 meshes and 1500 meshes, were blended by different proportions and filled into PP matrix with 30 wt %. Crystal morphology and isothermal crystallization kinetics of a series of composites were characterized by differential scanning calorimeter (DSC) and polarizing microscope. The results showed that composites filled with CaCO₃ of effective size gradation leaded to a well‐crystalline order and a large crystal size, while their isothermal crystallization kinetics and crystallization rate constant (k) were declined, and their Avrami exponents (n) and crystallization half‐life (t_1/2) were increased compared with the composites filled with single size CaCO₃. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2437–2444, 2006     

废镍触媒的综合利用

本文采用酸溶，除渣，分离及蒸发浓缩，冷却，过滤等操作步骤，从废镍触媒中回收得有实用价值的硫酸镍，硫酸镁晶体，其回收率分别为７５％和９０％，经济效益也比较好。     

Anodic behaviour of zinc in methanol solutions of lithium perchlorate

Anodic dissolution of poly- and single-crystals of zinc was performed in methanol solution of lithium perchlorate by means of cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The mechanism of anodic dissolution of zinc in organic solvents occurs in two oxidation steps. It is the first step that surface anodic product is created. Stability of the surface product is much better in anhydrous organic environments than in aqueous media; because the product is stable, a barrier layer composed of is formed at low anodic overvoltage. The formation of the layer is much stronger on the low index than on the high-index plane (0 0 0 1), where the adsorption of anodic product is more difficult.     

Observations on the estimation of scavenging activity of phenolic compounds using rapid 1,1-diphenyl-2-picrylhydrazyl (DPPH<Superscript>•</Superscript>) tests

Rapid 1,1-diphenyl-2-picrylhydrazyl (DPPH^•) tests are often applied to classify the scavenging activity of phenolic compounds (AH). Published analytical protocols differ in more than one experimental condition, and results for the relative order or magnitude of activity are often contradictory. In this work, parameters such as duration of test, [AH]/[DPPH^•] molar ratio, and solvent effects were examined and discussed. The test duration and the value of the [AH]/[DPPH^•] ratio did not influence the order of activity among tested antioxidants. Ethanol, commonly used as solvent in such tests, was compared with acetonitrile and tert-butyl alcohol. Solvent properties such as the ability to form hydrogen bonds with the AH seem to influence the level of the relative activity (%RSA). Higher %RSA values were observed in ethanol. The activity of the most polar compounds was affected the most, and in some cases (caffeic, dihydrocaffeic, and rosmarinic acids) the order of activity was changed owing to different kinetics. Standardization of the analytical protocol should include a 20-min reaction period and a molar ratio that permits attainment of a 60–80% RSA value for the most potent antioxidant. Solvent choice is critical for classifying activity. Safe classification can be based only on results from kinetic studies.     

Hyperbranched Polymers Containing Cyclopentadienyliron Complexes

A number of hyperbranched polymers containing cyclopentadienyliron moieties were prepared using the A₂+B₃ method. The A₂ compounds used were common diols, dithiols or dichloroarenecomplexes. B₃ compounds included either prepared star-shaped molecules or a purchased triol. The effect of the reaction conditions on the properties of the products was probed. Analysis of the prepared polymers was conducted using ¹H and ¹³C NMR, viscometry, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Viscometry values were generally found to be low, in the range of 0.175–0.300 dl/g. TGA showed losses starting at approximately 230°C and ending at 280°C, corresponding to the decomposition of the cyclopentadienyliron moiety. Degradation of the polyether backbone was found to occur starting at 390–567°C. Glass transition temperatures were found to be between 60 and 134°C, whereas melting temperatures ranged from 155 to 190°C.     

Thermal and flow properties of oils from salmon heads

Thermal and flow properties of unrefined oils from the heads of red or pink salmon were evaluated. Major thermal degradation of the salmon oils occurred between 200 and 450°C. Red and pink salmon oils were completely decomposed at 533 and 668°C, respectively. The phase transition of salmon oils occurred over a wide range of temperatures. The melting points of −69.6 to −0.36°C and −64.7 to 20.8°C were observed for red and pink salmon oils, respectively. The enthalpy was 40 j/g for red salmon oil and 39 j/g for pink salmon oil. Specific heat capacity ranges of 0.8 to 1.6 and 1.3 to 2.3 j/g/°C were observed for red and pink salmon oils, respectively. Both salmon oils exhibited Newtonian flow behavior. Red salmon oil required higher magnitudes of energy (kj·mol⁻¹) to flow than pink salmon oil. The viscosity of salmon oils was temperature-dependent and could be predicted by the Arrhenius equation.     

A biomarker of n−3 compliance in patients taking fish oil for rheumatoid arthritis

Dietary fish oil supplements have been shown to have benefits in rheumatoid arthritis (RA), other inflammatory diseases, and in cardiovascular disease. As with any medical advice, variability will exist with regard to adherence and consequent biochemical or pharmacophysiologic effects. The aim was to explore the utility of plasma phospholipid EPA as a measure of n−3 PUFA intake and response to standardized therapeutic advice given in an outpatient or office practice setting, to increase dietary n−3 PUFA, including a fish oil supplement. Patients with early RA were given verbal and written advice to alter their dietary n−3 PUFA intake, including ingestion of 20 mL of bottled fish oil on juice daily. The advice included instructions to increase n−3 PUFA and to avoid foods rich in n−6 PUFA. Every 3 mon, blood samples were obtained for analysis of plasma phospholipid FA. Plasma phospholipid EPA was used as the primary index of n−3 PUFA intake. A diverse response was seen, with about one-third of patients achieving a substantial elevation of plasma phospholipid EPA over the 12-mon study period. A third had little change, with the remainder achieving intermediate levels. Data obtained longitudinally from individual patients indicated that substantial elevations of EPA (>5% total plasma phospholipid FA) could be maintained for more than 3 yr. Plasma phospholipid EPA is a convenient measure of adherence to advice to take a dietary n−3 PUFA-rich fish oil supplement. This measure may prove a useful adjunct to intention to treat analyses in determining the effect of dietary fish oil supplements on long-term outcomes in arthritis and other chronic inflammatory diseases. It may also provide a guide to the effectiveness of therapeutic and preventive messages designed to increase n−3 PUFA intake.     

Transformations of sulphur compounds in high-sulphur coals during reduction in the potassium/liquid ammonia system

The two types of high-sulphur coals Mequinenza and Illinois No. 6, in the initial form and subjected to potassium/liquid ammonia reduction, were analysed by atmospheric pressure-temperature programmed reduction (AP-TPR) method. It has been shown that preliminary demineralisation was beneficial for AP-TPR measurements because of the removal of calcium compounds. The reduction of sulphides and disulphides in the potassium/liquid ammonia system was found to lead to formation of aromatic and aliphatic thiols. The presence of the latter is better manifested in the AP-TPR kinetograms when the measurements are performed in the presence of a special reducing mixture. It has been shown that the coal reduction in the potassium/liquid ammonia system apart from transformations of non-thiophene sulphur groups also leads to breaking up of the C-S bonds in some thiophene systems.     

Classification of vegetable oils by high-resolution <Superscript>13</Superscript>C NMR spectroscopy using chromatographically obtained oil fractions

¹³C NMR spectra of oil fractions obtained chromatographically from 109 vegetable oils were obtained and analyzed to evaluate the potential use of those fractions in the classification of vegetable oils and to compare the results with the NMR analysis of complete oils. The oils included the following: virgin olive oils from different cultivars and regions of Europe and north Africa; “lampante” olive, refined olive, refined olive pomace, hazelnut, rapeseed, high-oleic sunflower, corn, grapeseed, soybean, and sunflower oils; and mixtures of virgin olive oils from different geographical origins. Oils were divided into two sets of samples. The training set (98 samples) was employed to select the variables that resulted in significant discrimination among the different oil classes. By using stepwise discriminant analysis, more than 98% of correct validated assignments were obtained; these results were confirmed when applied to the test set (11 blind samples). Results suggest that the use of oil fractions considerably increases the discriminating power of NMR in the analysis of vegetable oils.