保山气田新近系羊邑组二-三段沉积微相

保山盆地为滇西的一个具西断东超箕状断陷结构的新近系小型盆地。为搞清区内保山气田的沉积特征，指导该区油气勘探工作，结合沉积岩（物）与沉积环境之间的辩证关系，通过对沉积岩的岩性特征（颜色、岩石类型、岩石结构、黏土矿物、岩相组合）的分析研究，借助于沉积相在测井和地震剖面上的显著特征，研究并划分了保山气田新近系上新统羊邑组二-三段的沉积微相类型。结果表明，在该研究区主要发育了扇三角洲前缘亚相中的水下分流河道、分流河道间、前缘席状砂、河口坝等沉积微相类型，以及浅湖亚相中的浅湖泥和浅湖漫流席状砂沉积微相。剖析各类骨架微相的沉积特征后指出：水下分流河道、河口坝和前缘席状砂为该区最有利的储集砂体。     

昆2井优快钻井及油气层保护技术

昆2井是一口位于柴北缘西段的昆特依凹陷潜伏Ⅰ号圈闭上的风险探井,设计井深为5950m。针对柴北缘深探井存在的主要技术难题,制定了昆2井的技术对策。通过对钻井设备的优选、井身结构的优化、钻头及钻具组合的优选、钻井参数及钻井液性能的优化、油气层保护技术的研究与应用,形成了一套适合于柴北缘的优快钻井技术,使昆2井的完钻井深达到5950m。与邻区的深探井平均水平相比,在井深增加888m、大尺寸井眼段更长的前提下,昆2井的钻井、完井周期分别缩短了98.75d、124.2d,钻机月速度增加了317m/台,平均机械钻速增加了0.82m/h。根据“理想充填新理论”,确定了保护油气层的最优复配暂堵方案,利用该方案所配制的钻井液其渗透率恢复值达到了87.5%以上,流变性能良好,滤失量低,对改善泥饼质量、增强井壁稳定性有明显的效果。     

互联网业务流量监测技术的应用和设计

对互联网业务流量监测技术的应用及现状进行了分析，并针对NetFlow技术，对互联网业务流量监测系统建设方案设计中需要考虑的几个重要问题进行了讨论。     

Periodic surface modeling for computer aided nano design

Current solid and surface modeling methods based on Euclidean geometry in traditional computer aided design are not efficient in constructing a large number of atoms and particles. In this paper, we propose a periodic surface model for computer aided nano design such that geometry of atoms and molecules can be constructed parametrically. At the molecular scale, periodicity of the model allows thousands of particles to be built efficiently. At the meso scale, inherent porosity of the model represents natural morphology of polymer and macromolecule. Surface and volume operations are defined to support crystal and molecular model creation with loci and foci periodic surfaces. The ultimate goal is to enable computer assisted material and system design at atomic, molecular, and meso scales.     

En/Decoder for Spectral Phase-Coded OCDMA System Based on Amplitude Sampled FBG

A novel en/decoder for spectral phase-coded optical code-division multiple-access system based on amplitude sampled fiber Bragg grating (FBG) is proposed. Both equivalent chirp and equivalent phase shift are achieved by amplitude sampling. Compared with previous en/decoder based on step chirped FBG, it is easier to fabricate. The performance of the proposed en/decoder is verified by both numerical simulation and experimental demonstration.     

Lactic acid production from dining‐hall food waste by Lactobacillus plantarum using response surface methodology

BACKGROUND: Food waste generally has a high starch content and is rich in nutritional compounds, including lipids and proteins. It therefore represents a potential renewable resource. In this study, dining‐hall food waste was used as a substrate for lactic acid production, and response surface methodology was employed to optimise the fermentation conditions. RESULTS: Lactic acid biosynthesis was significantly affected by the interaction of protease and temperature. Protease, temperature and CaCO₃ had significant linear effects on lactic acid production, while α‐amylase and yeast extract had insignificant effects. The optimal conditions were found to be an α‐amylase activity of 13.86 U g^?1 dried food waste, a protease activity of 2.12 U g^?1 dried food waste, a temperature of 29.31 °C and a CaCO₃ concentration of 62.67 g L^?1, which resulted in a maximum lactic acid concentration of 98.51 g L^?1 (88.75% yield). An increase in inoculum size would be appropriate for accelerating the depletion of initial soluble carbohydrate to enhance the efficiency of α‐amylase in dining‐hall food waste fermentation. CONCLUSION: A suitable regression model for lactic acid production was developed based on the experimental results. Dining‐hall food waste was found to be a good substrate for lactic acid fermentation with high product yield and without nutrient supplementation. Copyright © 2008 Society of Chemical Industry     

Influence of post‐treatments on the properties of porous poly(vinyl alcohol) membranes

Porous poly(vinyl alcohol) (PVA) membranes were prepared by a phase‐inversion method. The influence of chemical crosslinking and heat treatments on the swelling degree, resistance to compaction, mechanical strength, and morphology of porous PVA membranes was extensively studied. The crosslinking degree and crystallinity of the membranes, calculated from IR spectra, increased with the treatment time. The porosity, calculated on the basis of swelling experiments, showed a decreasing trend for heat‐treated membranes but remained almost at a constant value for crosslinked membranes. Such a change was further proved with scanning electron microscopy pictures. The behavior was explained by the rearrangement of PVA chains during the heat‐treatment process, which led to morphological changes in the membranes. The mechanical properties of the porous membranes in dry and wet states were measured, and a great difference was observed between crosslinked and heat‐treated membranes in the dry and wet states. The crosslinked membranes showed good mechanical properties in the dry state but became fragile in the wet state. On the contrary, the heat‐treated membranes were more flexible in the wet state than in the dry state. This change was explained by the turnaround of inner stress in the systems during the swelling process. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Viscoelastic properties of polyarylene ether nitriles/thermotropic liquid crystalline polymer blend

Polyarylene ether nitriles (PEN)/thermotropic liquid crystalline polymer (TLCP) blend was prepared via melt mixing. The immiscible phase morphologies, linear and nonlinear, as well as transient viscoelastic properties of the blend were studied using SEM, rheometer, and DMA. The linear dynamic viscoelastic behavior of the blend shows temperature dependence due to further evolution of the immiscible morphology and, as a result, the principle of time‐temperature superposition (TTS) is invalid. In the steady shear flow, the discrete TLCP phase is difficult to be broken up because of the high viscosity ratio of the blend systems, while is easy to be coarsened and followed by elongation, and finally, to form fibrous morphology at high TLCP content and high shear level. During this morphological evolution process, the transient stress response presents step increase and nonzero residual relaxation behavior, leading to increase of the dynamic viscoelastic responses after steady preshear. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

虚拟企业模型并行仿真研究

随着各种全新的制造理念,特别是虚拟企业的出现,企业模型的规模不断扩大,使目前存在的大多数企业模型仿真系统的效率大大下降。该文针对此问题,通过深入分析虚拟企业模型结构,并在已有的构件化企业建模体系CEMS及其仿真系统的基础上,结合异步仿真技术和多线程技术提出了一种分层式企业模型仿真体系结构,为虚拟企业模型的快速高效的仿真提供了一种有效的方法。