热载流子注入对MOS结构C─V和I─V特性的影响

讨论了热载流子注入对ＭＯＳ结构Ｃ─Ｖ和Ｉ─Ｖ特性的影响。指出热载流子效应引起载流子陷落和界面态的产生，导致Ｃ─Ｖ特性曲线畸变、平带电压漂移和恒定电压下ＳｉＯ２漏电流随时间漂移。本文论述了这些漂移的机理，提出了漂移的ｔｎ物理模型，从而很好地解释了实验所观察到的现象。     

石家庄市CATV系统网络技术指标分配初探

在ＣＡＴＶ系统网络工程设计中，技术指标的分配产关键问题。本文介绍了石家庄市在系统设计时采用的符合实际的设计程序，并对系统前端，传输及用户网各部分技术指标的确定，计算与分配方法，指标的核算等作了较详细地阐述，以供同行参考。     

用于重离子核反应实验测量的纵向电场气体电离室

本文报道了一种新型的大动态范围，多叠层探测器系统组件之一的纵向电场气体电离室的构造，性能和在中能得离子核反应实验中的应用。     

~（60）Co辐照对聚四氟乙烯表面润湿性的影响

研究了具有低表面能的氟聚合物聚四氟乙烯（ＰＴＦＥ），经６０Ｃｏγ射线辐照后表面状态的变化，以及其对液体介质蒸馏水的润湿性。较详细地论述了辐照后表面粗糙度、结晶度以及表面化学基因等不同因素对ＰＴＦＥ表面润湿性的影响。通过对ＰＴＦＥ及其表面的红外、Ｘ光衍射，表面粗糙度的分析，弄清了辐照后ＰＴＦＥ表面化学基团的改变对有机氟聚合物表加的润湿性影响很大，而粗糙度和结晶度的变化对润湿性影响较小。     

DIGITAL PROCESSING OF THE POLARIZATION STATE OF GEOPHYSICAL ULF SIGNALS

In this paper, the evaluation by running window smoothing is used for the digital processing of the polarization of geophysical ULF signals. The observed signals are resolved into two orthogonal complex components so that it is no longer necessary to consider the phase and amplitude of the signals simultaneously.     

GL—2型Φ600mm螺旋选别攀枝花钛铁矿生产实践

攀矿选钛厂设计采用传统的螺旋选矿设备ＦＬＸ一１型φ６００ｍｍ螺旋选矿机和φ１２００ｍｍ螺旋溜槽，从选矿（铁）厂磁选尾矿物料中回收原生粒状钛铁矿积累了多年生产实践经验。而广东有色金属研究院研制的ＧＬ一２型φ６００ｍｍ螺旋选矿机具有处理能力大、分选效率高、选别粒级宽、不需冲洗水及占地面积小等特点，有取代选钛厂目前使用的螺旋选矿设备之趋势。     

6M32(51)氮氢气压缩机系统的技术改造

1 机组简介 6M32(51)-190/320-BX型氮氢气压缩机的基础件采用德国博尔格公司的专有技术,具体参数如下: 压缩介质:氮氢气,压缩级数:6级;转速:375rpm;行程:320mm,轴功率:2920kW,容积流量:190m~3/min;气量调节:回路调节,冷却填料润滑油:1.95 kg/h;重量:主机69.45t,     

Comparisons of PWM and one-cycle control for power amplifier with multilevel converter

Based on the concepts of cascade multilevel converters and one-cycle technique, comparisons are conducted to characterize the distortion of the pulsewidth modulation (PWM) and one-cycle control methods that were applied to converters. Simulation results for the different control schemes are obtained in PSIM software initially to see the effect of one-cycle control different from that of PWM control. Through the comparisons, the advantages and disadvantages are identified for each method. The one-cycle scheme is better than PWM control in reducing undesirable harmonics and tracing dynamic waveforms. Simulation and experimental results are also provided to verify the conclusions.     

An implementation of the vectorial finite element analysis ofanisotropic waveguides through a general-purpose PDE software

This paper reports on the major progress in the development of an intelligent, interactive and automated system, based on the vector finite element method, and implemented within PDE/Protran problem solving environment. The system is known as WAVEGIDE and was originally developed by the authors for an efficient solution of inhomogeneous dielectric waveguides. In this paper, it has been further extended to the solution of anisotropic waveguiding structures. With our system, through an interactive “question-and-answer” session, which requires minimal knowledge of programming, the problem can be defined using high level PDE/Protran commands. It can then be simply and quickly solved by the main processor within this intelligent environment. To verify the convergence and accuracy of the present approach, numerical results (with respect to the grid density and element order) for a rectangular metallic waveguide half filled with dielectric are given and compared with other finite element methods. Numerical results for an anisotropic dielectric rectangular waveguide are also presented. These results clearly illustrate the accuracy and the ease of use of the modified WAVEGIDE program