浅谈项目的形象包装

对房地产项目的样板房包装、售楼部包装及包装应注意的问题进行了论述,同时介绍了楼盘包装的内容及具体的包装策略,并指出楼盘的销售推广是房地产项目开发后期的关键环节,其成效直接影响到投资项目的市场价值实现.     

基于C8051F02X单片机的远程在线升级技术

介绍了一种在远程对C8051F02XSOC系列单片机进行固件升级的系统。并对升级过程中产生的问题提出了解决办法。细述了通过JTAG操作方式刷新flash存储器的整个过程,并对几种固件升级方法进行了对比。     

Signature analysis and defect detection in layered manufacturing of ceramic sensors and actuators

This paper presents the concept of a process signature for the use of online signature analysis and defect detection in the layered manufacturing (LM) of ceramic sensors and actuators. To achieve the high quality of parts built by the fused deposition of ceramics (FDC), an online process-monitoring system is implemented to detect the processing defects. Using a process signature extracted from the image of a layer captured by the monitoring system, an ideal image is created that is then compared to the original image to detect and identify the defects. Some results of signature analysis and defect detection for single-material and multi-material parts are also presented.Received: 22 July 1999, Accepted: 21 October 2001, Published online: 29 October 2003 Correspondence to: Mohsen A. JafariThis work was supported by the Office of Naval Research under grant # N-0014-96-1-1175. Ref. US Patent # S-5738817, April 14, 1998.     

轧机主传动电机励磁控制分析

在技术资料短缺的情况下，结合实际经验，绘制出进口轧机主传动电机励磁控制电路图，并进行了较为详细的分析。     

��չ����Ȼ��Ϊԭ�ϵ�ȼ�ϵ������

研究燃料汽车及其氢源系统是当今国内外能源工业与汽车工业的共同课题，而优选制氢能源则是这一课题的关键。章介绍了利用能源、经济、环境(EEE)——生命周期评估(LCA)这一综合评估方法，针对以天然气、煤或石油作为制氢能源的多种燃料电池氢源供应方式以及配套的燃料电池汽车系统，从经济性、能源利用效率和环境影响三个方面进行了生命周期清单分析和EEE综合评价。结果显示：天然气作为发展燃料电池汽车氢源的一次能源，具有氢制取技术路线多样化、经济上竞争力强、能源利用效率高和环境效益好等诸多优势，应为燃料电池汽车的首选制氢能源。对这一评估模型的敏感性分析显示，即使在天然气价格波动较大时，天然气制甲醇--甲醇车载重整车和天然气制氢--纯氢车这两个方案仍然最具优势。     

带材纠偏和对中控制系统

本文介绍带材生产线中的纠偏和对中控制系统，主要阐述元件选择、硬件和软件设计以及系统功能。     

Synthesis and aggregate formation of poly(styrenesulfonate)-b-poly(ethylene glycol)-b-poly(styrenesulfonate) triblock copolymers in aqueous solution induced by binding with aluminum ions

Summary  Well-defined water-soluble poly(styrenesulfonate)-b-poly(ethylene glycol)-b- poly(styrenesulfonate) (PSS-b-PEG-b-PSS) triblock copolymers with narrow molecular weight distribution (1.29 < M_w/M_n < 1.36) were synthesized in aqueous solution at 70 ^oC via reversible addition-fragmentation chain transfer (RAFT) polymerization. The complex formed by the PSS-b-PEG-b-PSS triblock copolymer coordinated with aluminum ion was investigated with turbidimetry, dynamic light scattering (DSL), zeta-potential, and transmission electron microscopy (TEM). The aggregation formation was based on the neutralization of the SO₃^- groups in the PSS blocks with Al³⁺ ions. The appearance, size and stability of the PSS-b-PEG-b-PSS/Al³⁺ aggregates were controlled by varying the PSS block length and degree of neutralization (DN). At DN = 0.33, where the PSS-b-PEG-b-PSS copolymer was completely neutralized with Al³⁺, the aggregate size increased with increasing PSS block length. The transition from the shrinking coil of small size to the interchain aggregates of large size was found at DN of about 0.33.     

高能球磨FeCo+MnO的结构与磁性研究

用高能球磨采用两种方案制备了FeCo MnO体系,并用X射线衍射和振动样品磁强计对其结构和磁性质做了分析.发现采用直接氧化Mn而得到MnO的方法,所得体系的MnO较纯;而通过分解MnCO3得到MnO的体系,MnO纯度较低,有较多Mn3O4杂质,两种方法制备的FeCo MnO体系的矫顽力和剩磁比都比单纯FeCo体系的增加很多,且前一种方法比后一种方法制备的FeCo MnO体系的矫顽力和剩磁比较大.然后研究了球磨时间及退火处理对FeCo MnO体系矫顽力及剩磁比的影响,发现球磨时间为120h体系的矫顽力和剩磁比最大;经过退火处理后,体系的矫顽力和剩磁比都有较大幅度的增加.     

寻找无效或低效生产层的方法

注水和产液量加大是导致特高含水期油气生产成本上升的主要要素，如何寻找无效或低效生产层、控制无效或低效注水及产液量已成为搞好综合调整、降低油气生产成本的关键问题。因此，从理论分析、实验数据及经验值等方面分析、探讨了以累积注水倍数、数值模拟计算、吸水剖面资料、油井找水资料、注水井分层压力降落速度、精细地质研究等为依据的6种寻找无效或低效生产层的方法，并将其应用于喇嘛甸油田。实践表明，以累积注水倍数为依据，同时结合测井、试井资料，能够比较准确地判断无效或低效生产层。