Development of the Embedded Protective Device Based on ARM

An embedded protective device for 35kV power line is worked out based on Philips＇ LPC2292 ARM MCU. Several aspects such as embedded design technique adopted in the system framework, application of adaptive theory in data acquisition, Board Support Packet （BSP） developing and task dispatching related to operating system are discussed. Both hardware and software framework of the system are given. Advanced hardware platform and software development environment is applied in design of the system, with the advanced co-design technology.     

20T/H工业锅炉主汽压回路参数寻优自适应PID控制

本文给出了一个自适应PID调节器应用于工业锅炉燃烧系统控制的实例,为克服自适应 控制中所遇到的实际问题,采用了监控级专家控制.实际运行表明,该系统优于常规PID调节器.     

一种新型陶瓷材料及其耐磨性

对新型Ａｌ２Ｏ３－ＴｉＣ－Ｃｏ陶瓷的磨粒磨损，冲蚀磨损及其在单颗粒作用下的摩擦磨损行为进行了研究。与ＡＴ３０（７０ｗｔ％Ａｌ２Ｏ３－３０ｗｔ％ＴｉＣ）陶瓷相比，Ａｌ２Ｏ３－ＴｉＣ－Ｃｏ陶瓷具有更为良好的耐磨性，金属钴的存在提高了基体的韧性，细化了晶粒，其综合力学性能得到了显著提高，ＡＴＣ陶瓷样品耐磨性与其强韧化水平和细致的组织结构有关。     

Successive interference cancellation for multiuser asynchronousDS/CDMA detectors in multipath fading links

There has been an increasing interest in the use of code-division multiple access (CDMA) in cellular mobile and wireless personal communications. The choice of such multiaccess technique is attractive because of its potential capacity increases and other technical factors such as privacy and multipath rejection capabilities. However, it is well known that the performance of CDMA can be significantly degraded due to cochannel interference (CI) and the near-far effects. We consider the performance of direct-sequence (DS)-based CDMA over fading channels that are modeled as slowly varying Rayleigh-fading discrete multipath channels. Specifically, we propose and analyze an adaptive multistage interference cancellation strategy for the demodulation of asynchronous DS spread-spectrum multiple-access signals. Numerical results show that the proposed multistage detector, which alleviates the detrimental effects of the near-far problem, can significantly improve the system performance     

聚合物光纤几何参数测量系统

基于CCD图像技术提出了显微放大成像、图像相对测量，通过计算机图像处理完成外径的为1mm聚合物光纤几何参数（芯径、外径、不圆度）的测量，测量精度为6μm左右。并给出了系统的结构与原理，分析了系统实现的精度保证。该系统也可实现聚合物光纤数值孔径的测量和折射率分布的表征等。     

实行全面质量管理 做好江口水电站工程设计

江口水电站是芙蓉江干流开发中的骨干工程。为认真履行江口工程的设计合同，确保优质、高效地完成江口工程的各项设计工作，长江委设计院实行全面质量管理，建立了一套规范化的统计管理程序，制订详细的设计计划，落实江口工程项目各级责任人的质量责任制，采取特殊技术措施，对工程设计过程中的各项质量活动进行全过程的管理，使江口工程在满足质量标准、合同进度的情况下，工程投资最省。     

几种火箭弹点火具的对比研究

通过２点火药剂的性能和３种不同结构点火具的输出性能对比试验，分析了不同的点火药剂和装药结构对点火具输出性能的影响，展望了几点火具的应用前景。     

彩色PDP用玻璃基板

本文讨论了彩色ＰＤＰ现用钠钙玻璃的热稳定性，指出由于这种玻璃在热处理过程中易变形和收缩，因而不适合作大面积彩色ＰＤＰ基板材料，介绍了彩色ＰＤＰ基板玻璃的制造方法和特点。最后介绍了日本旭硝子公司和美国康宁公司各自为彩色ＰＤＰ新开发的玻璃基板材料ＰＤ２００和ＣＳ２５。     

晶须取向对SiCw／Al复合材料切削表面质量的影响

切削与晶须取向方向间的夹角对ＳｉＣｗ／Ａｌ复合材料切削表面质量有很大影响。当切削角为４５°时，晶须拔出和转动现象均较少，复合材料切削表面粗糙度最低。当切削角为１３５度时，晶段转动造成的撕裂破坏程度很大，复合材料切削表面粗糙度最大。     

微量Ag对CP276合金性能和组织的影响

研究添加不同含量的Ａｇ对ＣＰ２７６合金的拉伸性能和时效组织的影响。对拉伸强度、延伸率测试及透射电镜观察表明：０．１１ｗｔ％加入可促进Ｔ１相析出，使合金强度值升高；０．３５ｗｔ％Ａｇ的加入可在时效前期生成富Ａｇ、Ｍｇ的稳定的ＧＰ区，从而降低合金中Ｃｕ的固溶度，阻碍Ｔ１相析出，时效后期，ＧＰ区分解，生成大量Ｔ１相，使合金强度值显著升高。