Static Capacity Prediction by Dynamic Methods for Three Bored Piles

Three bored piles were built and tested at the National Geotechnical Experimentation Sites, at Texas A&M University, to gather data on the reliability of large-strain dynamic methods to predict the static capacity of bored piles. The three piles had a nominal diameter of 0.915 m, a nominal length of 10 m, and some planned and unplanned defects. The piles were first subjected to a static load test and then four companies were asked to perform dynamic tests—namely, Statnamic and drop weight tests—and predict the static load test results. The paper shows the comparison between predicted and measured results.     

Cathodoluminescence study in AlxGa1 − xN structures

In this work, we consider a 2D model for calculation of cathodoluminescence in GaN-based structures. This model is developed using an extended generation profile and taking into account the influence of the carrier diffusion process, internal absorption and some radiative recombination processes. First, we have investigated the effect of hole diffusion length and the surface recombination velocity on the CL spectra of GaN sample grown at 800 °C by MOVPE method. Then, we have calculated the dependence of CL intensity from AlGaN alloys as a function of Al content and the electron beam energy.

Results show a red shift of the CL peaks when the beam energy is varied from 2 to 10 keV at room temperature. The band-edge emission of Al_xGa_1 − xN shifts about 0.49 eV when the Al composition is increased from x = 0.18 to 0.38. Comparison of the experimental spectra with simulations shows a good agreement.     

Influence of hydrostatic pressure on the electrical properties of unvulcanized FEF-loaded SBR

Styrene butadience rubber (SBR-1502) loaded with different concentrations of FEF carbon black was tested to find out the effect of pressure on its electrical properties during vulcanization. Using the thermodynamically calculated values of the pressure coefficient (K), the thermoelastic coefficient (L = ?T/?P) was also estimated and compared with that obtained by other workers. The thermoelastic coefficient was found to be strongly dependent on the carbon black concentration.     

The dynamics of dislocation interaction with sessile self-interstitial atom (SIA) defect cluster atmospheres

The interaction dynamics between dislocations and radiation induced sessile self-interstitial atom (SIA) dislocation loops in FCC metals are investigated. As a result of dislocation line flexibility, its equilibrium configuration is found to be sensitive to the elastic field of nearby SIA dislocation loops. Dislocation line flexibility also influences the critical stress to free trapped dislocations from pinning atmospheres (i.e. the critical resolved shear stress (CRSS)). Calculated CRSS values differ by up to 100% from the estimates of Trinkaus et al. [J. Nucl. Mater. 249 (1997) 91; J. Nucl. Mater. 251 (1997) 172], which are based on cluster forces exerted on static rigid dislocations. The mechanism of dislocation unpinning from random cluster atmospheres is shown to be a consequence of morphological instabilities on the dislocation line. The initial location of the unlocking instability is always associated with regions of minimum line tension in the vicinity of the lowest cluster density. The growth of dislocation shape fluctuations leads to a sequence of unzipping events, freeing the dislocation from the elastic field of cluster atmospheres. The relative critical shear stress to unlock dislocations in FCC metals, (τ_C/μ), is found to be in the range: 0.001–0.002, for random atmosphere cluster densities of 10²⁴–10²⁵ m³, and in the range: 0.0014–0.003, for coherent cluster atmospheres of the same density range. These values are factors of 4–6 smaller than Kroupa's estimates. Implications of these results to the determination of the upper yield point of irradiated FCC metals are discussed.     

Synthesis,characterization, thermal and optical properties of soluble polyimides derived from an unsymmetrical diamine

A new unsymmetrical diamine monomer, 2,4‐diaminophenyl [4′‐(2′′,6′′‐diphenyl‐4′′‐pyridyl)phenyl]ether, was successfully synthesized by nucleophilic substitution of 1‐chloro‐2,4‐dinitrobenzene with 4‐(2′,6′‐diphenyl‐4′‐pyridyl) phenol. The diamine monomer was characterized by FTIR, ¹H and ¹³C NMR, and elemental analysis techniques and used for the preparation of novel polyimides (PIs) by reaction with commercially available tetracarboxylic dianhydrides such as pyromellitic dianhydride, 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride, and bicyclo[2.2.2]‐oct‐7‐ene‐2,3,5,6‐tetracarboxylic dianhydride. These PIs with inherent viscosities ranged from 0.43 to 0.48 dL/g were readily soluble in many organic solvents and afforded tough and flexible films by solution casting. These polymers exhibited T_gs between 237 and 294°C, and 10% weight loss temperatures in excess of 500°C with up to 56% char yield at 600°C in air. Their maximum fluorescence emission in dilute (0.2 g/dL) NMP solution appeared at 450 nm. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

A comparison of SWAT, HSPF and SHETRAN/GOPC for modelling phosphorus export from three catchments in Ireland

Recent extensive water quality surveys in Ireland revealed that diffuse phosphorus (P) pollution originating from agricultural land and transported by runoff and subsurface flows is the primary cause of the deterioration of surface water quality. P transport from land to water can be described by mathematical models that vary in modelling approach, complexity and scale (plot, field and catchment). Here, three mathematical models (soil water and analysis tools (SWAT), hydrological simulation program-FORTRAN (HSPF) and système hydrologique Européen TRANsport (SHETRAN)/grid oriented phosphorus component (GOPC)) of diffuse P pollution have been tested in three Irish catchments to explore their suitability in Irish conditions for future use in implementing the European Water Framework Directive. After calibrating the models, their daily flows and total phosphorus (TP) exports are compared and assessed. The HSPF model was the best at simulating the mean daily discharge while SWAT gave the best calibration results for daily TP loads. Annual TP exports for the three models and for two empirical models were compared with measured data. No single model is consistently better in estimating the annual TP export for all three catchments.     

Quality and ripening changes of Ras cheese made by direct acidification

Trials were carried out to produce Ras cheese of good quality without the use of starter. Cheese was made from pasteurized cow's milk acidified with lactic acid or citric acid to pH 5.8 alone or coupled with mixing the curd with glucono δ lactone (4.5 g/kg curd). Control cheese was made from milk ripened with a starter culture of S. lactis. Resultant cheeses showed poor body and texture, weak flavour intensity and low levels of soluble nitrogen compounds and free volatile fatty acids. Incorporation into the cheese curd of mixtures containing Fromase 100 (fungal protease) and Piccantase B (fungal lipase) or Fromase 100 and Capalase K (animal lipase) enhanced flavour intensity, improved body characteristics and accelerated the formation of both soluble nitrogen compounds and free volatile fatty acids. The organoleptic properties of the experimental cheeses with added enzymes were comparable to those of the control cheese.     

Electrochemical oxidation of hydroquinone, resorcinol, and catechol on boron-doped diamond anodes

The electrochemical oxidation of aqueous wastes polluted with hydroquinone, resorcinol, or catechol on boron-doped diamond electrodes has been studied. The complete mineralization of the organic waste has been obtained independently of the nature of each isomer. No aromatic intermediates were found during the treatment, and solely aliphatic intermediates (carboxylic acids C4 and C2, mainly) were detected in the three cases. Although as from the bulk electrolyses study no differences in the electrochemical oxidation of dihydroxybenzenes seem to exist, different voltammetric behavior between resorcinol and the other two isomers was obtained in the voltammetric study. Catechol and hydroquinone have a reversible quinonic form, and a cathodic reduction peak appears in their voltammograms. The characterization of the first steps in the electrochemical oxidation of the three dihydroxybenzenes showed the formation of a larger number of intermediates in the oxidation of catechol, although no carbon dioxide was detected in its oxidation. Conversely, the oxidation of resorcinol and hydroquinone lead to the formation of important concentrations of carbon dioxide. The nondetection of aromatic intermediates, even if small quantities of charge are passed, confirms that the oxidation must be carried out directly on the electrode surface or by hydroxyl radicals generated by decomposition of water.     

Limitations of the Hydraulic Imperative: The Case of the Golan Heights

Water management in the Levant often focuses on a ‘hydraulic imperative’. This was recently illustrated by the peace discussions between Israel and Syria, with their emphasis on the Golan's water. Such a focus limits policy makers to a purely hydrological perspective, and leads to a focus on securing water access and controlling ‘hydrostrategic territories’. This excludes or underestimates other salient issues, and disregards potentially useful managerial-technical solutions. For any peace settlement to be sustainable, a more comprehensive approach is needed, unbound by the single-issue ‘hydraulic imperative’ to better take into account the multifaceted aspects of the water.     

Algorithms for validating chiral properties of insulins.

The combination of chiral ligand exchange on Cu(II) complexes in aqueous base with circular dichroism spectropolarimetric detection provides excellent avenues to validate the chirality properties of oligopeptides and proteins. The method is quick and simple and has the potential for development into an automated, routine procedure for quality control applications. Target analytes used for this first study of a protein system are human, porcine, and bovine insulins prepared by different procedures and obtained from different sources, production lots, and manufacturers. The analytical specificity of the test makes the method a potentially useful technique for validating the chirality properties of many peptide and protein forms.