铸轧铝板坯晶粒度的控制

晶粒度是影响铸轧铝板坯性能的重要因素。论述了铸轧铝板坯产生粗大晶粒的主要原因及其预防措施。     

Na+ and/or Cl− Toxicities Determine Salt Sensitivity in Soybean (Glycine max (L.) Merr.), Mungbean (Vigna radiata (L.) R. Wilczek), Cowpea (Vigna unguiculata (L.) Walp.), and Common Bean (Phaseolus vulgaris L.)

Grain legumes are important crops, but they are salt sensitive. This research dissected the responses of four (sub)tropical grain legumes to ionic components (Na⁺ and/or Cl⁻) of salt stress. Soybean, mungbean, cowpea, and common bean were subjected to NaCl, Na⁺ salts (without Cl⁻), Cl⁻ salts (without Na⁺), and a “high cation” negative control for 57 days. Growth, leaf gas exchange, and tissue ion concentrations were assessed at different growing stages. For soybean, NaCl and Na⁺ salts impaired seed dry mass (30% of control), more so than Cl⁻ salts (60% of control). All treatments impaired mungbean growth, with NaCl and Cl⁻ salt treatments affecting seed dry mass the most (2% of control). For cowpea, NaCl had the greatest adverse impact on seed dry mass (20% of control), while Na⁺ salts and Cl⁻ salts had similar intermediate effects (~45% of control). For common bean, NaCl had the greatest adverse effect on seed dry mass (4% of control), while Na⁺ salts and Cl⁻ salts impaired seed dry mass to a lesser extent (~45% of control). NaCl and Na⁺ salts (without Cl⁻) affected the photosynthesis (P_n) of soybean more than Cl⁻ salts (without Na⁺) (50% of control), while the reverse was true for mungbean. Na⁺ salts (without Cl⁻), Cl⁻ salts (without Na⁺), and NaCl had similar adverse effects on P_n of cowpea and common bean (~70% of control). In conclusion, salt sensitivity is predominantly determined by Na⁺ toxicity in soybean, Cl⁻ toxicity in mungbean, and both Na⁺ and Cl⁻ toxicity in cowpea and common bean.     

天然酯绝缘油改性的研究进展

天然酯绝缘油具有较高的燃点和闪点、优异的天然降解能力和良好的绝缘性能,是矿物绝缘油的绿色替代品.由于其自身的理化特性,将其应用于变电设备还面临着很多挑战.本文综述了天然酯绝缘油的制备工艺,结合天然酯绝缘油的不足之处,从添加剂改性、混合改性、纳米改性及化学改性等方面阐述了天然酯绝缘油的研究成果,并对未来的研究方向进行了展望.     

城轨地铁用车轴强度计算分析

为了保证某城轨地铁车辆的行车安全,对其车轴强度进行了分析。参照标准EN13103中的材料力学计算方法,选取该车轴的7个截面,计算出各截面的合力矩、应力以及安全系数。结果表明,车轴危险截面位于轮座与刹车盘座圆弧过渡处和刹车盘座与轴身圆弧过渡处,且最大计算应力小于许用应力,满足车轴强度设计要求。     

蛙跳式充电的无人机自主巡线技术与系统(一):基于GPS/RTK的无人机自主定位

为解决无人机巡线过程中的续航难题,设计实现基于蛙跳式充电的无人机自主巡线系统.作为第一部分,本文基于GPS/RTK的无人机自主定位展开研究.首先,针对南方电网公司提出的无人机无人操控自主巡线目标,搭建了蛙跳式充电平台,以提高无人机的续航能力;然后,为保证无人机能按预设航迹进行自主导航,并准确降落到地面平台进行充电,对无人机GPS/RTK组合导航模块中自主巡线关键技术进行了研究;最后,分别对巡线技术中姿态解算、加速度补偿及延时补偿这3个主要环节进行实验仿真.实验结果表明:姿态解算算法可以准确地估计无人机在飞行中的飞行姿态,并能适时快捷地补偿运动加速度;延时补偿算法能有效地解决定位传感器延时的问题;在气压计输出高度数据不健康时,系统能识别数据的健康状况,并自动融合GPS输出的高度数据.因此本文提出的方法和研究结论对无人机的自主巡线有着重要的工程指导意义.     

基于操纵平稳性的液压挖掘机轨迹规划方法

以既能达到良好的轨迹规划精度,又有优良的操纵平稳性为目标,提出了一种挖掘机器人的智能轨迹规划方法.以挖掘姿态角为优化变量;油缸进程和加速度梯度为双目标;位置盲角和最佳切削范围为约束建立优化数学模型,采用遗传算法寻找最优值.对3种规划策略：被动修正法、主动调整法和智能规划法进行了行程和速度梯度对比,结果表明,采用优化规划方法可以大幅减少液压系统冲击和振动,使挖掘机操纵更加平稳.     

2＋2×0.32ST超高强度钢丝帘线在半钢子午线轮胎带束层中的应用

研究2+2×0.32ST钢丝帘线替代2+2×0.35HT钢丝帘线在半钢子午线轮胎带束层中的应用。结果表明:与2+2×0.35HT钢丝帘线相比,2+2×0.32ST钢丝帘线的强度更高、直径更小、耐疲劳性能更好;在轮胎带束层中用2+2×0.32ST钢丝帘线替代2+2×0.35HT钢丝帘线后,工艺性能良好,成品轮胎的充气外缘尺寸变化不大,强度性能、高速性能、耐久性能和耐水压性能均能满足设计和国家标准要求,滚动阻力降低,同时有效减小了轮胎中的钢丝帘线和胶料用量,降低了生产成本。     

粗粒料三轴试验橡皮膜嵌入量数值模拟

在粗粒料三轴试验中,橡皮膜嵌入量可造成显著的体积变形量测误差。本文针对颗粒材料的接触特点,利用Nagata Patch方法重建颗粒表面,基于重建曲面进行接触状态的判断和接触几何信息的计算,开发了高效的颗粒接触算法。该法采用dual mortar有限元方法处理颗粒与橡皮膜间的接触模拟,针对橡皮膜变形较大的特点,采用更新坐标的大变形计算格式,并根据重建的颗粒表面对颗粒-橡皮膜的距离进行几何修正,实现了颗粒-橡皮膜接触的精细化模拟,可较好地模拟计算“柔性”橡皮膜嵌入颗粒孔隙的过程。进行了Kramer钢球试验以及粗颗粒料和标准粗砂三轴试验橡皮膜嵌入过程的模拟计算,计算结果符合一般规律,与相应的试验结果吻合较好,验证了本文方法对于粗粒料膜嵌入问题的适用性。     

A panoramic view of Li7P3S11 solid electrolytes synthesis,structural aspects and practical challenges for all-solid-state lithium batteries

The development of an inorganic electrochemical stable solid-state electrolyte is essentially responsible for future state-of-the-art all-solid-state lithium batteries (ASSLBs). Because of their advantages in safety, working temperature, high energy density, and packaging, ASSLBs can develop an ideal energy storage system for modern electric vehicles (EVs). A solid electrolyte (SE) model must have an economical synthesis approach, exhibit electrochemical and chemical stability, high ionic conductivity, and low interfacial resistance. Owing to its highest conductivity of 17 mS·cm^-1, and deformability, the sulfide-based Li₇P₃S₁₁ solid electrolyte is a promising contender for the high-performance bulk type of ASSLBs. Herein, we present a current glimpse of the progress of synthetic procedures, structural aspects, and ionic conductivity improvement strategies. Structural elucidation and mechanistic approaches have been extensively discussed by using various characterization techniques. The chemical stability of Li₇P₃S₁₁ could be enhanced via oxide doping, and hard and soft acid/base (HSAB) concepts are also discussed. The issues to be undertaken for designing the ideal solid electrolytes, interfacial challenges, and high energy density have been discoursed. This review aims to provide a bird's eye view of the recent development of Li₇P₃S₁₁-based solid-state electrolyte applications and explore the strategies for designing new solid electrolytes with a target-oriented approach to enhance the efficiency of high energy density all-solid-state lithium batteries.     

基于5G基站节能技术的智慧型断路器研究与设计

研究分析了5 G基站节能站点增强型节能的技术方案.主要采用AAU设备关断的方法,实现设备关闭期间断路器保持分闸状态,减少AAU能耗的效果.设计开发了一套基于物联网技术的智能型微型断路器,包括断路器和网关模块,实现设备端时段分合闸控制.最后通过实际案例数据,论证该方法在实际基站节能降耗的效果.