Numerical Study of Finite Element Method Based Solutions for Propagation of Wetting Fronts in Unsaturated Soil

The accurate prediction of the propagation of a wetting front in an unsaturated soil subjected to surficial infiltration is of practical importance to many geotechnical and geoenvironmental problems. The finite element method is the most common solution technique as the hydraulic soil properties are highly nonlinear. Two important issues are often found to create difficulties in such analyses. First, numerical oscillations are usually observed in the calculated pore pressures at the wetting front. Second, when a reasonable mesh size and time step are used, the elevation of the wetting front may be seriously overpredicted. This paper is focused on the second issue. The under-relaxation (UR) technique used in the iterative process within each time step is found to have a serious impact on rate of convergence with refinement in mesh size and time step. Two different techniques are typically used; the first evaluates the hydraulic conductivity using an average of heads calculated from the preceding time node and the most recent iteration of the current time node (UR1), and the second evaluates the hydraulic conductivity using the average of heads calculated from the two most recent iterations of the current time nodes (UR2). The study shows that UR1, which is adopted in programs such as SEEP/W, ensures that the solution converges rapidly to a stable solution within a time step, but may converge to the wrong wetting front at a given elapsed time unless a sufficiently refined mesh is used. UR2 converges much more slowly within a time step, but the error in the wetting front is smaller than that generated by UR1.     

在二(2-乙基己基)磷酸钠的微乳液中金属萃合物对水增溶的影响

测算了由二（2－乙基己基）磷酸钠，金属盐（CoSO4,NiSO4,ZnSO4,MgCl2或Cr(NO3)3)水溶液，正辛醇和正辛烷组成的微乳液中正辛醇从连续油相到界面的ΔGo→i^o和水的极限增容量φ'H2O。用金属萃取络合物反胶束的形成及其亲油性解释了金属离子对φ'H2O和ΔGo→i^o的影响。     

自动力套管补贴加固技术及其在B125井的应用

随着油田开发时间的延长，油水井井下套管的损坏将越来越严重，套管故障井将越来越多，为了恢复套损井生产，将套管损坏所造成的损失降到最低，在配套波纹管补贴，水动力补贴，爆炸补贴等专门修套技术的基础上，通过认真调查研究，又配套了操作方便简单，适用套管损坏类型广的自动力套管补贴加固技术，使各种套管变形，套管断错（错开没有位移或位移量不大时）、套管破裂，误射孔井段封堵，已射开水层封堵等修井作业的难度进一步降低，从而进一步提高了修复井综合开发经济效益。     

Delay-dependent state estimation for delayed neural networks

In this letter, the delay-dependent state estimation problem for neural networks with time-varying delay is investigated. A delay-dependent criterion is established to estimate the neuron states through available output measurements such that the dynamics of the estimation error is globally exponentially stable. The proposed method is based on the free-weighting matrix approach and is applicable to the case that the derivative of a time-varying delay takes any value. An algorithm is presented to compute the state estimator. Finally, a numerical example is given to demonstrate the effectiveness of this approach and the improvement over existing ones.     

石油测井仪器可靠性指标探讨

在分析常用可靠性指标及其应用现状的基础上，根据可靠性理论及石油测井仪器的特点。提出了石油测井仪器的可靠性模型。在探讨常用可靠性指标对石油测井仪器适用性的同时，提出将平衡稳定工作时间NWTURE和免维修测井井次NOLWNM作为石油测井仪器可靠性指标的思想；探讨了获取可靠性指标的途径。给出了推荐使用的石油测井仪器可靠性指标。     

有机极化聚合物材料及电光调制器件

有机极化聚合物材料是一类新型的功能高分子材料，在光电子及集成光学方面具有诱人的应用前景，其电光调制器件已接近实用化，本文综述了有机极化聚合物材料，极化聚合物体系及电光调制器件的研究进展，并指出它们存在的问题和发展方向。     

喷射轧制Fe-4.5%Si硅钢片的组织和性能

采用喷射成形和轧制工艺制备了厚度为0.5mm的Fe-4.5%Si高硅钢片，并对其密度、显微组织和电磁性能进行了测试分析，研究结果表明：在最佳的喷射成形和轧制工艺条件下，所制备硅钢片的磁感应强度B25为1.544T、B50为1.641T；铁损P1050为1.437W/kg、P1550为3.43W/kg，说明喷射成形轧制技术可以制备出高磁感应强度、低铁损的高硅钢片。     

条件概率关系数据库模型

现实世界中大量存在着的不确定性信息，关系数据库模型仅视它们为空值，有必要增强其处理这类信息的能力，文章在总结前人工作的基础上推广关系数据库模型，创建有效处理随机型不确定性信息的条件概念关系数据库模型，该模型通过在关系模式中增加一个条件概率测度属性，为每条记录指定适当的条件概率的途径，来表示不确定性信息。文中以对象码为基本工具，创建了条件概率关系结构；以特征函数为基本工具，定义了一套基于该结构的代数运算规则。条件概率的语意比概率的语意广泛，灵活，因而该模型能有效克服概率关系模型的许多不足。     

天然气长输管道泄漏检测方案对比

大口径、长距离天然气输送管道的泄漏检测和定位技术日益受到人们的重视。总结评价了用于天然气长输管道泄漏检测和安全预警的各种技术方案，讨论了其基本原理、适用范围、技术成熟度、优点和缺点以及工程应用情况；采用灵敏度、定位精度等7项技术指标对各种泄漏检测方法进行了评价和对比。目前，音波泄漏检测技术和分布式光纤泄漏检测技术由于具有诸多方面的优点，是近年来国内外泄漏检测技术研究的重点和热点，这两种技术已初步应用于实际，并取得了良好的效果。重点对这两种泄漏检测技术的原理、适用范围、所能达到的技术指标、优、缺点以及工程案例进行了详细讨论、分析和对比，可为我国天然气长输管道泄漏检测和安全预警系统的开发和研究提供技术依据。