机械合金化Fe50Ti50非晶的形成及球磨强度对它的影响

本文通过电子扫描和Ｘ衍射对机械合金人Ｆｅ５０Ｔｉ５０非晶粉末形成做了研究。研究发现：机械合金非晶形成可以大致地分为二个阶段－粉末的破碎阶段和非晶的形成阶段。另外，对球磨强度对非晶形成的影响进行了研究。结果表明：强度低时粉末需要较长的时间才能形成非晶，强度高时粉末形成非晶的时间大大缩短，但在随后的球磨中，粉末会重新晶化形成新相。     

一种简便的评定引战配合效率方法

在导弹近炸引信起爆延时具有随机性基础上，本文建立了一种用延时及其数学特征表示的评定引战配合效率的简便方法，并对有关应用问题进行了讨论。     

Performance analysis of the bidirectional associative memory and animproved model from the matched-filtering viewpoint

This paper discusses the bidirectional associative memory (BAM) model from the matched-filtering viewpoint and offers it a new interpretation. Our attention is focused on the problem of stability and attractivity of equilibrium states. Several sufficient and/or necessary conditions are presented. To improve the BAM performance, an exponential function is used to enhance the correlations between the binary vectors of the retrieval key and that of the stored pattern similar to the key. The modified model is shown to be asymptotically stable. Theoretical analysis and simulation results demonstrate that the modified model performs much better than the original BAM in terms of memory capacity and error correction capability.     

变结构变参数设计方法及其在机械CAD中的应用

提出了一种新颖的机械结构设计思想－变结构变参数设计方法，并结合实例，阐述了变结构变参数设计的概念、原则、实施措施和意义。由此对Ｉ－ｄｅａｓ软件包进行了二次开发，编制了发动机曲轴专用ＣＡＤ软件程序，并用某型号发动机曲轴进行了验证。     

微米级冷轧带钢厚度控制系统

分析、讨论了冷轧应用的各种厚度控制的优缺点，介绍质量流量厚度控制原理和控制精度极高的微米级带钢厚控（μＡＧＣ）系统及其可能产生的经济效益。     

用小尺寸R－CT试样研究核压力容器钢断裂韧性及与Charpy试样的比较

提出了一种用双边带深侧槽的小尺寸圆形紧凑拉伸试样评定核压力容器（ＲＰＶ）钢断裂韧性的单试作试验方法，给出了用该方法测定的两个厂家生产的核压力容器用Ａ５０８ＣＬ３钢的断裂韧性参数，还与Ｃｈａｒｐｙ试样的试验结果及大尺寸标准试样的试验结果进行了比较。研究结果表明：用双边带深侧槽的小尺寸Ｒ－ＣＴ试样测得的断裂韧性值比相同恻槽深度预制疲劳裂纹Ｃｈａｒｐｙ试样的测试值更接近有效断裂韧性值，所以，用于核压力容器断裂韧性的监测是可行的。     

应用音平化渣图象分析和指导转炉造渣操作

利用音平化渣图象可以清晰地看出在转炉造渣过程中何时发生喷溅，何时发生炉渣返干和何时化渣正常。应用音平化渣图象和炉渣三元相图，可以正确地分析发生喷溅和返干的原因，从而找到避免突发性喷溅和严重返干的方法。正确的枪位和炉渣碱度控制是实现平稳吹炼的保证，而音平化渣图象能帮助操作工实现这一目标。     

河道维护费征收中需注意的几个问题

依法征收河道工程维护费,是水行政主管部门的一项重要职能,是强化水利依法管理的重要手段和筹措水利建设资金的重要途径。随着依法行政进程的不断推进,被征管单位依法维权的意识不断增强。根据《行政诉讼法》的规定,人民法院审查行政案件,对具体行政行为是否合法进行审查。根据《行政复议法》的规定,复议机关审查复议案件,对具体行政行为是否合法     

Nutrient removal performance of an anaerobic–anoxic–aerobic process as a function of influent C/P ratio

The laboratory scale anaerobic–anoxic–aerobic (A²O) process fed with synthetic brewage wastewater was designed to investigate the effects of changing feed C/P ratio on the performance of biological nutrient removal (BNR) processes. In the experiment, the influent chemical oxygen demand (COD) concentration was kept at approximately 300 mg L^?1 while the total phosphorus concentration was varied to obtain the desired C/P ratio. Results showed that when the C/P ratio was lower than 32, phosphorus removal efficiency increased as C/P ratio increased linearly, while when the C/P ratio was higher than 32, the P removal efficiency was maintained at 90–98%, and effluent P concentration was lower than 0.5 mg L^?1. However, regardless of the C/P ratio, excellent COD removal (90% or higher) and good total nitrogen removal (75–84%) were maintained throughout the experiments. It was also found that very good linear correlation was obtained between COD uptake per unit P released in the anaerobic zone and C/P ratio. In addition, the P content in the wasted activated sludge increased with the decrease in the C/P ratio. Based on the results, it was recommended that the wastewater C/P ratio and its effects be incorporated into BNR design and operational procedures, appropriate C/P ratios were used to achieve the effluent treatment goals. Copyright © 2005 Society of Chemical Industry