城市老年妇女生活照料社会支持网络的实证研究——基于南通市易家桥社区的问卷调查

基于南通市易家桥社区的实证调查,发现城市老年妇女生活照料的社会支持网络主要由非正规支持体统构成。老年妇女自身丧偶率高、身体条件较差,家庭中配偶也受到了身体条件的限制,子女承担着较大压力无法给予老年妇女完善的照料,家政行业的参差不齐,社区居委会的行政化都影响到了老年妇女的生活照料。构建与完善城市老年妇女生活照料的社会支持网络,应从继续加强家庭的作用、发展家政服务业、政府提供保障、完善居家养老等方面着手。     

Non-Fourier heat conduction in a thin gold film heated by an ultra-fast-laser

Based on the dual-phase-lagging(DPL)heat conduction model,the Cattaneo-Vernotte(CV)model and the improved CV model we investigate the one-dimensional heat conduction in gold films with nano-scale thickness exposed to an ultra-fast laser heating.The influence of system parameters on the temperature field is explored.We find that for all the non-Fourier heat conduction models considered in this work,a larger Knudsen number normally leads to a higher temperature.For the DPL model,the large ratio of the phase lag of temperature gradient to the phase lag of heat flux reduces the maximum temperature and shortens the time for the system to reach its steady state.The CV model and the improved CV model lead to the similar thermal wave behavior of the temperature field,but the thermal wave speeds for these two models are different,especially for large Knudsen numbers.When the phase lag of temperature gradient is smaller,the difference between the DPL model and the improved CV model is not significant,but for the large phase lag of temperature gradient the difference becomes quite significant,especially for the large Knudsen number.In addition,the effect of the surface accommodation coefficient,which is a parameter in the slip boundary condition,on the temperature field of the gold film heated by ultra-fast laser pulses is investigated based on the DPL model.     

超细Al（OH）3的粒度控制研究

采用铝酸钠种子分解法制备超细Al（OH）3.用X射线衍射仪（XRD）表征了样品的晶相组成,用扫描电子显微镜（SEM）观察了样品的形貌,用激光粒度分析仪测定样品的粒度分布.研究了NaOH浓度、NaOH/Al（OH）3摩尔比,分解温度,分解时间、晶种率和搅拌速率等因素对Al（OH）3的粒度的影响.结果表明：NaOH浓度越高,分解温度越低,NaOH/Al（OH）3摩尔比越小,得到的Al（OH）3颗粒的粒度越小.试验条件为：NaOH浓度180 g/L,NaOH/Al（OH）3摩尔比1.15,分解温度40℃,分解时间26 h,晶种率8％,搅拌速率200 rpm时,氢氧化铝颗粒的平均粒度为2.89 μm.     

双回转送进二辊冷轧管机凸轮设计研究

本文提出了双回转送进二辊冷轧管机凸轮理论轮廓曲线的新设计方法 ,其轮廓曲线加速度与跃度呈梯形 ,且跃度边界连续 ,给出了针对双回转送进二辊冷轧管机的两个过渡段具有等加速度和跃度的设计准则     

时效对接触线用Cu-Ag-Cr合金性能的影响

分析了固溶温度、时效及时效前冷变形量对Cu - 0 1 %Ag - 0 1 %Cr接触线用合金性能的影响 ,结果表明 :经 870℃固溶、 40 %～ 5 0 %冷变形及 480℃× 1 5h时效处理后 ,合金可获得良好的综合性能。     

IMPROVEMENT ON FATIGUE LIFE OF ALLOY LY12CZ AFTER LASER RADIATION AND ITS DAMAGE EVOLUTION

The change of microstructure of fatigue specimens before and after laser radiation was studiedby transmission electron microscopy.The results show that the diameter of dislocation cell λtends to a constant at fatigue failure.Based on the principles of continuous damagemechanics,expressions of the fatigue damage criterion and processes of fatigue damage evolu-tion for L Y12CZ have been derived.     

Influencing factors on elastic-plastic deformation of multi-layered surfaces under sliding contact

Stress distribution in the gradient multi-layered surface under a sliding contact was investigated using finite element method(FEM). The main structure parameters of layered surface discussed are total layer thickness,layer number and elastic modulus ratio of layer to the substrate. A model of multi-layered surface contact with rough slider was studied. The effect of the surface structure parameters on the elastic-plastic deformation was analyzed.     

随机森林理论浅析

随机森林是一种著名的集成学习方法,被广泛应用于数据分类和非参数回归。本文对随机森林算法的主要理论进行阐述,包括随机森林收敛定理、泛化误差界以和袋外估计三个部分。最后介绍一种属性加权子空间抽样的随机森林改进算法,用于解决超高维数据的分类问题。