We demonstrate a facile and effective approach to significantly improve the photoluminescence of bulk MoS2 via laser thinning followed by gold particle decoration. Upon laser thinning of exfoliated bulk MoS2, photoluminescence emerges from the laser-thinned region. After further treatment with an AuCl3 solution, gold particles self-assemble on the laser-thinned region and thick edges, further increasing the fluorescence of bulk MoS2 28 times and the Raman response 3 times. Such fluorescence enhancement can be attributed to both surface plasmon resonance and p-type doping induced by gold particles. The combination of laser thinning and AuCl3 treatment enables the functionalization of bulk MoS2 for optoelectronic applications. It can also provide a viable strategy for mask-free and area-selective p-type doping on single MoS2 flakes.
A nanofabrication method for the production of ultra-dense planar metallic nanowire arrays scalable to wafer-size is presented. The method is based on an efficient template deposition process to grow diverse metallic nanowire arrays with extreme regularity in only two steps. First, III–V semiconductor substrates are irradiated by a low-energy ion beam at an elevated temperature, forming a highly ordered nanogroove pattern by a “reverse epitaxy” process due to self-assembly of surface vacancies. Second, diverse metallic nanowire arrays (Au, Fe, Ni, Co, FeAl alloy) are fabricated on these III–V templates by deposition at a glancing incidence angle. This method allows for the fabrication of metallic nanowire arrays with periodicities down to 45 nm scaled up to wafer-size fabrication. As typical noble and magnetic metals, the Au and Fe nanowire arrays produced here exhibited large anisotropic optical and magnetic properties, respectively. The excitation of localized surface plasmon resonances (LSPRs) of the Au nanowire arrays resulted in a high electric field enhancement, which was used to detect phthalocyanine (CoPc) in surface-enhanced Raman scattering (SERS). Furthermore, the Fe nanowire arrays showed a very high in-plane magnetic anisotropy of approximately 412 mT, which may be the largest in-plane magnetic anisotropy field yet reported that is solely induced via shape anisotropy within the plane of a thin film.
Multi-walled carbon nanotubes (MWCNTs) can act not only as a support for Fe3O4 nanoparticles (NPs) but also as a coworker with synergistic effect, accordingly improving the heterogeneous Fenton-like efficiency of Fe3O4 NPs. In this study, Fe3O4 NPs were in situ anchored onto MWCNTs by a moderate co-precipitation method and the as-prepared Fe3O4/MWCNTs nanocomposites were employed as the highly efficient Fenton-like catalysts. The analyses of XRD, FTIR, Raman, FESEM, TEM and HRTEM results indicated the formation of Fe3O4 crystals in Fe3O4/MWCNTs nanocomposites prepared at different conditions and the interaction between Fe3O4 NPs and MWCNTs. Over a wide pH range, the surface of modified MWCNTs possessed negative charges. Based on these results, the possible combination mechanism between Fe3O4 NPs and MWCNTs was discussed and proposed. Moreover, the effects of preparation and catalytic conditions on the Fenton-like catalytic efficiency were investigated in order to gain further insight into the heterogeneous Fenton-like reaction catalyzed by Fe3O4/MWCNTs nanocomposites. 相似文献
To enhance the sound absorption performance of open-cell aluminum foam, the double main pores-porous cell walls (DMP-PCW) aluminum foams via infiltration casting of preforms mixed with two sizes of NaCl particles are prepared. The pore structure, sound absorption performance, and mechanism of DMP-PCW aluminum foam are investigated. The pore structure consists of double-sized main pores similar to the NaCl particles and the cell wall pores formed by the connections between NaCl particles. It is found that the static flow resistivity of DMP-PCW aluminum foam reaches an optimum value of 28105 Pa.s m−2 when the volume proportion of small main pores increases, the size of cell wall pores decreases, and the number of cell wall pores per unit main pore surface area (NPPA) increases. At 800–6300 Hz, the average absorption coefficient is 0.89. In addition, the Wilson model predicts the sound absorption properties of DMP-PCW aluminum foam. The predicted values agree well with the measured values. The finite-element acoustic simulations and dynamic viscous-thermal permeability calculations reveal that the improved sound absorption performance of DMP-PCW aluminum foam is correlated to the enhanced sound transmission caused by increased NPPA and increased viscous-thermal loss due to the double main pore structure. 相似文献
Asynchronous federated learning (AsynFL) can effectively mitigate the impact of heterogeneity of edge nodes on joint training while satisfying participant user privacy protection and data security. However, the frequent exchange of massive data can lead to excess communication overhead between edge and central nodes regardless of whether the federated learning (FL) algorithm uses synchronous or asynchronous aggregation. Therefore, there is an urgent need for a method that can simultaneously take into account device heterogeneity and edge node energy consumption reduction. This paper proposes a novel Fixed-point Asynchronous Federated Learning (FixedAsynFL) algorithm, which could mitigate the resource consumption caused by frequent data communication while alleviating the effect of device heterogeneity. FixedAsynFL uses fixed-point quantization to compress the local and global models in AsynFL. In order to balance energy consumption and learning accuracy, this paper proposed a quantization scale selection mechanism. This paper examines the mathematical relationship between the quantization scale and energy consumption of the computation/communication process in the FixedAsynFL. Based on considering the upper bound of quantization noise, this paper optimizes the quantization scale by minimizing communication and computation consumption. This paper performs pertinent experiments on the MNIST dataset with several edge nodes of different computing efficiency. The results show that the FixedAsynFL algorithm with an 8-bit quantization can significantly reduce the communication data size by 81.3% and save the computation energy in the training phase by 74.9% without significant loss of accuracy. According to the experimental results, we can see that the proposed AsynFixedFL algorithm can effectively solve the problem of device heterogeneity and energy consumption limitation of edge nodes. 相似文献
The self-assembly of peptidyl virus-like nanovesicles (pVLNs) composed of highly ordered peptide bilayer membranes that encapsulate the small interfering RNA (siRNA) is reported. The targeting and enzyme-responsive sequences on the bilayer's surface allow the pVLNs to enter cancer cells with high efficiency and control the release of genetic drugs in response to the subcellular environment. By transforming its structure in response to the highly expressed enzyme matrix metalloproteinase 7 (MMP-7) in cancer cells, it helps the siRNA escape from the lysosomes, resulting in a final silencing efficiency of 92%. Moreover, the pVLNs can serve as reconfigurable “Trojan horse” by transforming into membranes triggered by the MMP-7 and disrupting the cytoplasmic structure, thereby achieving synergistic anticancer effects and 96% cancer cell mortality with little damage to normal cells. The pVLNs benefit from their biocompatibility, targeting, and enzyme responsiveness, making them a promising platform for gene therapy and anticancer therapy. 相似文献
Carbon fiber reinforced composites have attracted lots of attention in many fields. However, on account of the poor infiltration of resin to carbon fiber, the weak interface performance between fiber and resin has been restricting the interface properties of composites. In recent progress, the review attaches more importance to the introduction of the third phase monomer, which mainly uses physical and chemical methods to assemble nanomaterials (such as carbon nanotubes, graphene, etc.) on the carbon fiber surface to modify the interface structure of the carbon fiber reinforced composites, and all of them have been demonstrated in this paper. Furthermore, the effects of introducing nanomaterials on the structure of the fiber/resin interface and the relationship between multi-scale interface structure and properties have been investigated. It can be seen that the design idea of researchers mainly uses one or more theories to improve the interface properties of carbon fiber reinforced composites, such as transition layer, chemical bonding, mechanical interlocking, infiltration, diffusion, and adsorption. In brief, this work provides some novel insights for the preparation of carbon fiber reinforced composites with excellent interlaminar shear strength. 相似文献