Paired-wire carrying current actuators and piezoelectric beam sensors for microelectromechanical systems

Microsystem Technologies - An alternative actuator for MEMS/NEMS device is proposed and analyzed. The actuator is based on the paired-wires (PW) carrying current concept, which makes the actuator...     

Hydrometallurgical Extraction of Vanadium from Mechanically Milled Oil-Fired Fly Ash: Analytical Process Optimization by Using Taguchi Design Method

In this study, the Taguchi design method was employed to determine the optimum experimental parameters in extraction of vanadium by NaOH leaching of oil-fired fly. Prior to designed experiments, the raw precipitates were mechanicallly milled using a high-energy planetary ball mill. Experimental parameters were investigated as follows: mechanical milling (MM) times (2 and 5?hours), NaOH (1 and 2 molar concentration) as reaction solution (RS), powder to solution (P/S) ratios (100/400 and 100/600?mg/mL), temperature (T) of reaction system (303 K and 333?K [30?°C and 60?°C]), stirring times (ST) of reaction media (4 and 12?hours), stirring speed (SS) being adjusted to 400 and 600?rpm, and rinsing times (RT) of remained filtrates (1 and 3?hours). Statistical analysis of signal-to-noise ratio followed by analysis of variance was performed in order to estimate the optimum levels and their relative contributions. Data analysis is carried out using L₈ orthogonal array consisting of seven parameters each with two levels. The optimum conditions were MM1 (3?hours), RS2 (2 molar NaOH), P/S2 (100/600?mg/mL), T2 (333?K [60?°C]), ST2 (12?hours), SS1 (400?rpm), and RT1 (1?hour). Finally, from environmental and economical points of view, the process is faster and better organized by employing this analytical design method.     

Transmission pricing and recovery of investment costs in the deregulated power system based on optimal circuit prices

Transmission pricing has become a major issue in the discussions about the deregulated electricity markets.Conse-quently,open access to the transmission system is one of the basic topics to allow compe...     

Evaluation of Centrifugal Casting Process Parameters for In Situ Fabricated Functionally Gradient Fe-TiC Composite

A gradient Fe-TiC composite was successfully produced via combination of in situ reaction with centrifugal casting techniques. Additionally, some of the effective parameters of the centrifugal casting process have been studied. Cast iron and ferrotitanium, which were used as raw materials, were melted using a high-frequency induction furnace coupled with centrifugal equipment. The microstructure and phase characterization of the fabricated composite was studied by scanning electron microscopy, optical microscopy, and X-ray diffraction. The results show that the production of a pearlite matrix composite reinforced by TiC particles is feasible. The distribution of TiC in the pearlitic matrix is completely uneven as a result of density difference between molten medium and TiC in the centrifugal casting process.     

Cavity Control of Prefoldin Nano Actuator (PNA) by Temperature and pH

Nano-Micro Letters - A molecular dynamics study to investigate the cavity control of Prefoldin based bio nano actuator is presented in this paper. Prefoldin is a molecular chaperone with a...     

Thermo-mechanical vibration analysis of rotating nonlocal nanoplates applying generalized differential quadrature method

In this study, thermal and small-scale effects on the flapwise bending vibrations of a rotating nanoplate, which can be the basis of nano-turbine design, have been analyzed. The nano-turbine is made of an orthotropic nanoplate with a setting angle that is modeled based on the classical plate theory (CPT) with cantilever boundary conditions. The axial forces are also included in the model as the true spatial variation due to the rotation and temperature change. The governing equations and boundary conditions are derived according to Hamilton's principle and the governing equations are solved with the aid of the generalized differential quadrature method. The effects of small-scale parameter, nondimensional angular velocity, temperature change, and setting angles in the first four nondimensional frequencies are discussed. Due to the consideration of the rotating effects, results of this study are applicable in nano-machines, such as nano-motors, nano-rotor, and other rotating nano-structures. Also, by considering the effect of thermal loading on rotation of a nanoplate, the results are useful in the design of nano-turbines.     

Proximity effects of a layered periodic structure on miniaturization of patch antennas

A miniaturized microstrip antenna on a planar layered periodic structure is proposed, designed and fabricated. The proposed structure miniaturizes patch antennas in the microwave band. With varying the parameters of the proposed structure, the achieved miniaturization factor can be adjusted in the range 2.6–4.2. Numerical and experimental results are presented. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2013.