从烟草悬浮细胞中分离液泡前体的方法研究

通过跟踪含有液泡前体特异标记物的组分, 利用细胞壁酶水解胞壁制造原生质体, 并用真针头挤压的方法裂解细胞, 用蔗糖密度梯度离心的方法分离液泡前体. 通过相差显微镜观察, 发现所分离的液泡前体保持完整的结构. 利用不同细胞器的标记物抗体进行免疫标记检测, 证明所纯化的液泡前体不含其他细胞器, 具有较高的纯度.     

Oxides Catalysts of Rare Earth and Transient Metal for Catalytic Oxidation of Benzene

The catalysts of CeO2 and the mixture of CeO2 and CuO were prepared, and the activities of these catalysts for completely oxidizing benzene were studied.The results show that the optimal proportion of CeO2/CuO is 6: 4.The highest temperature at which benzene was completely oxidized on these catalysts at different airspeed was measured.Compared these catalysts with the noble metal used, our catalysts had superiority in the resources and the industrial cost besides good activities.     

Space–Time Power Schedule for Distributed MIMO Links Without Instantaneous Channel State Information at the Transmitting Nodes

A space-time optimal power schedule for multiple distributed multiple-input multiple-output (MIMO) links without the knowledge of the instantaneous channel state information (CSI) at the transmitting nodes is proposed. A readily computable expression for the ergodic sum capacity of the MIMO links is derived. Based on this expression, which is a non-convex function of power allocation vectors, a projected gradient algorithm is developed to optimize the power allocation. For a symmetric set of MIMO links with independent identically distributed channels, it is observed that the space-time optimal power schedule reduces to a uniform isotropic power schedule when nominal interference is low, or to an orthogonal isotropic power schedule when nominal interference is high. Furthermore, the transition region between the latter two schedules is seen to be very sharp in terms of nominal interference-to-noise ratio (INR). For MIMO links with correlated channels, the corresponding space-time optimal power schedule is developed based on the knowledge of the channel correlation matrices. It is shown that the channel correlation has a great impact on the ergodic capacity and the optimality of different power scheduling approaches.     

溶胶-凝胶法制备Li（MoO4）2：Eu及表征

用溶胶-凝胶法制备了平均粒径为2～3μm的小颗粒、高亮度的Li（2-x）（MoO4）2：Eu系列钼酸盐红色荧光体。用XRD、SEM、粒度分析和分子荧光光度计对荧光体进行了表征和研究。常规的固相反应合成Li（2-x）（MoO4）2：Eux系列红色荧光粉需要在900℃以上的高温才能够形成均一的固溶体，而采用溶胶-凝胶法制取，在700℃就可以形成均一的单相Li（2-x）（MoO4）2：Eux，在750℃就可得到发光亮度最高的荧光体。其亮度是常规固相反应于900℃制得的荧光体的124％。采用溶胶-凝胶法制取Li（2-x）（MoO4）2：Eux系列，可以在相当宽的实验条件范围内得到小粒径、窄分布和高亮度的荧光体，具有良好的颗粒形貌。     

Finite-element analysis and experimental study on tensile fatigue behaviour of bitumen–stone adhesion

Tensile fatigue behaviours of bitumen–stone adhesion were investigated using a dynamic mechanics analyser under stress‐controlled mode at two temperatures of 5 and 25°C and various controlled‐stress levels. Failure characteristics including interfacial failure and cohesive failure were examined using image analysis of fracture surfaces. Finite‐element analysis on stress distributions was conducted under different temperatures, film thickness and interfacial bonding conditions. A Coulomb–Mohr like criterion in combination with shear and normal stresses is proposed to deal with the extreme thin adhesive layer, which can be further simplified into an adhesive zone without significant loss of accuracy for stress analysis.     

Involvement of zinc in intracellular oxidant/antioxidant balance

Methods to directly and indirectly identify the central sulcus are presented. In the axial plan, direct method is remarkable but obviously requires good visualization of the sulci in the central region. Sulci are readily visible in 90% of the cases on CT scans and in 50% of the cases on MRI. The method can also be applied when tumoral development erases the cerebral sulci by direct lecture of the controlateral rolandic region and right-left transfer. Within the precision limits of the method, it can be considered that the central sulci are symmetrical. The main signs are: the relative morphologies of the superior frontal sulcus and the precentral sulcus, the hook-shaped aspect of the middle part of the central sulcus, the internal end of the central sulcus projection anteriorly to the pars marginalis, the bifid nature of the internal end of the posterior central sulcus contouring the pars marginalis, and the lesser thickness of the posterior central gyrus compared with the precentral gyrus. The indirect method is less precise and is used when the direct method is unsuccessful. The central sulcus is identified on the sagittal images and, using the lateral view of the skull as a reference image, the topographic information is transferred to the axial images.     

眼球的自动定位

提出了一种由粗到细自动定位人脸的一个重要特征即眼球圆心的方法，该方法综合运用局部二值化，霍夫变换，像纱聚类，边缘提取等技术，对均匀或非均匀光照下拍摄或戴眼镜的照片都能获得很高的定位精度，适用于处理证件照。     

Viterbi译码器的硬件实现

介绍了一种Vkerbi译码器的硬件实现方法。设计的基于硬判决的Viterbi译码器具有约束长度长（9)、译码深度深（64)的特点。为了兼顾硬件资源与电路性能两个方面，在设计中使用了4个ACS单元，并根据Xilinx Virtex系列FPGA的结构特点．利用FPGA内部的BlockRAM保存汉明距离和幸存路径，提高了译码速度。     

碳纳米管的制备及研究

介绍了在直流电弧放电法制备富勒烯过程中，从阴电极表面收集到大量的碳纳米管及巴基葱，产生率达到５０％，并用电子显微镜对其进行了观察和初步研究。     

Modeling and control of magnet power supply system with switch-moderipple regulator

This paper presents the dynamic performance analysis and closed-loop design of a new power supply system for a high-current magnet load. This new system introduces a series switch-mode ripple regulator (SMRR) into a phase-controlled rectifier to improve system dynamic response and to reduce the harmonic content in the magnet current. In this paper, the new system control configuration is explained. The small signal dynamic model is established. The function of the SMRR as a speed-up feed-forward path during dynamic transients is assessed. The criteria of the closed-loop regulator design are identified. The theoretical analyses are accompanied by computer simulation and experimental results. The systematical design procedure is outlined by an example which offers better performance than ever reported on high-current magnet power supplies in terms of fast dynamic response (closed-loop bandwidth several kHz) and low harmonic content (less than 10 ppm) in the magnet current