手套箱气氛中氚化水处理的工艺研究

分子筛吸附柱和热金属镁床是手套箱气氛中氚化水 (HTO)搜集和分解处理的一种有效手段。测试了分子筛柱对气氛中水的吸附性能和热金属镁床对HTO的分解性能。结果表明 :分子筛柱对气氛中水的吸附效率 >99 99% ,在空气中水含量为 3 4× 1 0 - 3～ 4 2× 1 0 - 3条件下 ,未发现吸附柱水的贯穿现象 ;热金属镁床对HTO的分解率 >99 9% ,当金属镁的消耗量大于 80 %时 ,未见分解率明显降低。     

Shear ductility and toughenability study of highly cross-linked epoxy/polyethersulphone

The objective of the present study was to determine whether the ductility and toughenability of a highly cross-linked epoxy resin, which has a high glass transition temperature, T _g, can be enhanced by the incorporation of a ductile thermoplastic resin. Diglycidyl ether of bisphenol-A (DGEBA) cured by diamino diphenyl sulphone (DDS) was used as the base resin. Polyethersulphone (PES) was used as the thermoplastic modifier. Fracture toughness and shear ductility tests were performed to characterize the materials. The fracture toughness of the DDS-cured epoxy was not enhanced by simply adding PES. However, in the presence of rubber particles as a third component, the toughness of the PES–rubber-modified epoxy was found to improve with increasing PES content. The toughening mechanisms were determined to be rubber cavitation, followed by plastic deformation of the matrix resin. It was also determined, through uniaxial compression tests, that the shear ductility of the DDS-cured epoxy was enhanced by the incorporation of PES. These results imply that the intrinsic ductility, which had been enhanced by the PES addition, was only activated under the stress state change due to the cavitation of the rubber particles. The availability of increasing matrix ductility seems to be responsible for the increase in toughness. This revised version was published online in November 2006 with corrections to the Cover Date.     

36 m 高砖砌水塔定向折叠爆破拆除

介绍了复杂环境中砖砌高大水塔的定向折叠爆破拆除.根据周围的环境情况,在施工中采用了开定向窗、挖定位坑等技术措施,确保爆破成功,达到了设计效果.     

TRT入口方管道爆裂原因剖析

介绍了鞍钢7#高炉TRT装置入口方管道爆裂事故经过,进行了原因分析,并提出了解决措施。     

大空域机动巡航导弹的模糊PID控制器设计

针对大空域机动巡航导弹下降转平飞过程中出现的强非线性特点．在俯仰通道设计了模糊PID双模控制方案。以高度误差和该误差变化量为输入．以高度误差为阀限．在高度误差较大时采用响应迅速的模糊控制器．较小时采用稳态精度较高的PID控制器。最后通过仿真表明通过该方案所控制的弹道符合方案弹道．满足设计指标要求。     

ADSS光缆的力学计算

介绍了ADSS光缆的力学计算，给出了光缆弧垂、张力、应变和悬长等计算公式，并对普遍采用的“悬链线”和“抛物线”两种计算方法加以比较。     

Fuzzy rule interpolation for multidimensional input spaces in determining d50c of hydrocyclones

Fuzzy rule-based systems have been very popular in many engineering applications. In mineral engineering, fuzzy rules are normally constructed using some fuzzy rule extraction techniques to establish the determination model in predicting the d50c of hydrocyclones. However, when generating fuzzy rules from the available information, it may result in a sparse fuzzy rule base. The use of more than one input variable is also common in hydrocyclone data analysis. This paper examines the application of fuzzy interpolation to resolve the problems using sparse fuzzy rule bases, and to perform analysis of fuzzy interpolation in multidimensional input spaces.     

非晶金刚石离子镀膜机自动化控制系统的设计

结合非晶金刚石离子镀膜机的工艺特点和要求,介绍了一种成功应用的分布式控制系统的设计,重点讨论了控制系统的硬件配置、软件设计、通信服务程序以及软件编程中的几个控制算法.     

盘山闸扩建工程水工模型试验研究

辽河干流堤防安全泄量为5000m3/s,盘锦城市防洪工程竣工后,其安全泄量为6800m3/s。而盘山闸的设计泄流能力仅为3000m3/s。通过本模型试验研究进一步确定扩建工程方案的合理性。     

添加CaF2-YF3的AlN陶瓷的热导率

用CaF2和YF3做添加剂，在1750℃制备了热导率高于170W/m.K的的AlN陶瓷，并用XRD和SEM研究了AlN陶瓷在烧结过程中的相组成，微结构以及晶格参数的变化，并讨论了其对热导率的影响，研究发现，当使用CaF2-YF3做添加剂时，微结构差异对AlN陶瓷热导率的影响很小，AlN陶瓷的热导率主要由AlN晶格氧缺陷浓度决定，由于CaF2-YF3能有效降低AlN颗粒表面的氧含量，从而有利于获得高的热导率。