Wear Mechanisms of Chromia Refractories in Slagging Gasifiers

The hot-face refractory lining is a key component of gasification systems. The refractory liner protects the gasification system from the high-temperature corrosive gaseous and from the molten slag environment associated with the conversion of carbon feedstocks. This paper will discuss the effect of gasifier operating conditions and carbon feedstock slag/ash chemistry on the refractory service life. Particular attention is focused on the wear mechanism of chromia refractories, determined through postmortem analysis of spent refractory bricks from service in gasifiers. Also presented is the behavior of a phosphate-containing chromia refractory with improved resistance to structural spalling.     

Characterization of Liquid Developers for Continuous Tone Electrography

The relatively small particle sizes and lack of threshold development forces make liquid development a particularly suitable candidate for the development of continuously varying surface charge densities in pictorial electrography. The characterization of such developers has been pursued by studying their response to continuous and discrete surface charge density wedges on a computer-controlled test fixture. Results have been interpreted in terms of standard models of liquid development, and in most cases allow the extraction of the effective area coverage provided by the developer per unit of input surface charge density (the imagewise pattern of charge deposited by whatever electrographic writing device is employed). Examples of materials displaying linear and nonlinear responses to varying surface charge densities will be shown.     

Rosuvastatin Enhances the Catabolism of LDL apoB‐100 in Subjects with Combined Hyperlipidemia in a Dose Dependent Manner

Dose‐associated effects of rosuvastatin on the metabolism of apolipoprotein (apo) B‐100 in triacylglycerol rich lipoprotein (TRL, d < 1.019 g/ml) and low density lipoprotein (LDL) and of apoA‐I in high density lipoprotein (HDL) were assessed in subjects with combined hyperlipidemia. Our primary hypothesis was that maximal dose rosuvastatin would decrease the apoB‐100 production rate (PR), as well as increase apoB‐100 fractional catabolic rate (FCR). Eight subjects received placebo, rosuvastatin 5 mg/day, and rosuvastatin 40 mg/day for 8 weeks each in sequential order. The kinetics of apoB‐100 in TRL and LDL and apoA‐I in HDL were determined at the end of each phase using stable isotope methodology, gas chromatography‐mass spectrometry, and multicompartmental modeling. Rosuvastatin at 5 and 40 mg/day decreased LDL cholesterol by 44 and 54 % (both P < 0.0001), triacylglycerol by 14 % (ns) and 35 % (P < 0.01), apoB by 30 and 36 % (both P < 0.0001), respectively, and had no significant effects on HDL cholesterol or apoA‐I levels. Significant decreases in plasma markers of cholesterol synthesis and increases in cholesterol absorption markers were observed. Rosuvastatin 5 and 40 mg/day increased TRL apoB‐100 FCR by 36 and 46 % (both ns) and LDL apoB‐100 by 63 and 102 % (both P < 0.05), respectively. HDL apoA‐I PR increased with low dose rosuvastatin (12 %, P < 0.05) but not with maximal dose rosuvastatin. Neither rosuvastatin dose altered apoB‐100 PR or HDL apoA‐I FCR. Our data indicate that maximal dose rosuvastatin treatment in subjects with combined hyperlipidemia resulted in significant increases in the catabolism of LDL apoB‐100, with no significant effects on apoB‐100 production or HDL apoA‐I kinetics.     

Incorporation of polyfluorenes into poly(lactic acid) films for sensor and optoelectronics applications

Films of neat and plasticized biodegradable poly(lactic acid) (PLA) matrices containing anionic conjugated polyelectrolytes, poly[9,9‐bis(4‐phenoxybutylsulfonate)]fluorene‐2,7‐diyl‐alt‐arylenes, with 1,4‐phenylene and 4,4″‐p‐terphenylene, respectively, as arylene groups or a neutral poly(9,9‐dialkylfluorene) for comparison were prepared by solution casting. These films were characterized using differential scanning calorimetry, thermogravimetry, scanning electron microscopy and fluorescence spectroscopy. In addition, the effects of plasticizer on the thermal properties and the oxygen permeability of the PLA films were measured through the oxygen transmission rate. Results show that it is possible to obtain thin, optically transparent and luminescent films with potential in oxygen sensing, exhibiting good thermal and photochemical stability. At high polyelectrolyte content, evidence is found for phase separation and aggregate formation and it is no longer possible to obtain completely homogeneous films. The possibility of incorporating the cationic metal complex tris(2,2′‐bipyridyl)ruthenium(II) into plasticized PLA films containing conjugated polyelectrolytes for dual‐wavelength ratiometric luminescence sensing is also discussed. Copyright © 2012 Society of Chemical Industry     

A variable radius roll adhesion test (VaRRAT) suitable for measuring the adhesion of paint to metal

Early trials and analysis of a new adhesion test are discussed. The test is designed for measuring the adhesion of paint to deformable steel sheets as used in building, automotive, and other cladding applications, and does not require detailed knowledge of the paint mechanical properties. A stiff overlay, such as an epoxy resin, is applied to the coating, and the steel substrate is peeled away using a roll of well-defined radius to which the steel substrate is constrained. The propagation of a crack within the paint or at some interface in the paint/metal system depends mostly on the mechanical properties and thickness of the overlay and the radius of the constraining roll. The test is shown to discriminate better than existing practical adhesion tests between paints of expected differing adhesion/cohesion, but also presents some inconsistencies that require further work to resolve. BHP Institute of Steel Processing and Products, Wollongong NSW 2522, Australia.     

Thermomechanical effects in the torsional actuation of twisted nylon 6 fiber

Thermally induced torsional and tensile actuators based on twisted polymeric fibers have opened new opportunities for the application of artificial muscles. These newly developed actuators show significant torsional deformations when subjected to temperature changes, and this torsional actuation is the defining mechanism for tensile actuation of twisted and coiled fibers. To date it has been found that these actuators require multiple heat/cool cycles (referred to as “training” cycles) prior to obtaining a fully reversible actuation response. Herein, the effect of annealing conditions applied to twisted nylon 6 monofilament is investigated and it is shown that annealing at 200 °C eliminates the need for the training cycles. Furthermore, the effect of an applied external torque on the torsional actuation is also investigated and torsional creep is shown to be affected by the temperature and load. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45529.     

Evaluation of Rule-of-Mixtures Predictions of Thermal Expansion in Powder-Processed Ni–Al2O3 Composites

Ni-Al₂O₃ composites containing 5 to 80 vol% Ni were produced using powder processing methods and their thermal expansion behavior was studied using dilatometry. By varying composition and relative particle sizes, either interpenetrating-phase or particle-reinforced microstructures were obtained. Experimentally determined values of the mean thermal expansion coefficient were compared with predictions made using two different rule-of-mixtures (ROM) formulations. Experimental results for interpenetrating-phase composites were in reasonable agreement with linear ROM estimates. Certain particle-reinforced microstructures that contain processing-induced damage did not correlate as well with ROM predictions. By accounting for this damage in ROM models, better agreement with experimental observations was obtained. However, linear ROM predictions were reasonable over the entire composition range.     

Moving beyond ‘more crop per drop’: insights from two decades of research on agricultural water productivity

ABSTRACT

Concern over increasing water scarcity has led to the introduction of the concept of agricultural water productivity and an emphasis on interventions to achieve ‘more crop per drop’. Yet, a strong debate continues on how the concept is to be defined and used. Drawing largely from the irrigation literature, the origins of the concept and its methodological developments are reviewed, and its use in applied work over two decades is discussed. Based on this analysis of conceptual and applied research, key insights into the concept’s contributions and limitations are presented, as well as opportunities for further refinements.     

Air classification of pea flour–analytical studies

The pea-milling and subsequent air classification of whole peas was investigated on laboratory scale equipment. Two approximately linear but divergent calibration graphs were constructed for the air classifier based on two different definitions of particle size cut-point. At high classifying speed (11 000 rev min^?1) a fine fraction or protein concentrate was produced containing 55.1% protein (cf. 22% in original flour) although this represented only 29% of the total protein. The yield of protein in the fine fraction could be increased by using a three-stage milling and classifying procedure, although the actual protein content of the concentrate remained more or less the same. This procedure also had the effect of reducing protein contamination of the starch (coarse) fraction. Other effects of air classifying observed included the concentration of the lipid component into the fine fraction and the rough fractionation of the fibre constituent between the coarse (testa) and fine (cell wall material) fractions. Various aspects and problems associated with the use of air classification for the preparation of pea protein concentrates are discussed.     

Decentralised decision making in heterogeneous teams using anonymous optimisation

This paper considers the scenario where multiple autonomous agents must cooperate in making decisions to minimise a continuous and differentiable team cost function. A distributed and asynchronous optimisation algorithm is presented which allows each agent to incrementally refine their decisions while intermittently communicating with the rest of the team. A convergence analysis provides quantitative requirements on the frequency agents must communicate that is prescribed by the structure of the decision problem. In general the solution method will require every agent to communicate to and have a model of every other agent in the team. To overcome this, a specific subset of systems, called Partially Separable, is defined. These systems only require each agent to have a combined summary of the rest of the team and allows each agent to communicate locally over an acyclic communication network, greatly increasing the scalability of the system.