微机传真系统

本文介绍了集传真技术、通信技术、微型计算机技术于一体的微机传真系统，提出了微机传真系统在硬件接口及报表识别上的实现方法。     

烃类在三甘醇和四甘醇中无限稀释活度系数的测定与关联

用气相色谱法分别测定了苯、甲苯、乙苯、正庚烷、正辛烷、正壬烷和正癸烷在三甘醇和四甘醇中的无限稀释活度系数 ,测定温度范围为 5 0～ 13 0℃。用修正的UNIFAC模型 (Dortmund)对上述不同温度下的无限稀释活度系数实验数据进行关联 ,得到了三甘醇和四甘醇与其它基团的相互作用参数 ,并将计算结果与实测值进行了比较。     

T_C≥400°C高温PTC陶瓷的研制

利用国产原料，采用传统的陶瓷材料制备工艺，研制了居里温度ＴＣ≥４００°Ｃ的高温ＰＴＣ陶瓷，制成了居里温度ＴＣ＝４１２°Ｃ，电阻Ｒ≤１０３Ω，ｌｇ（Ｒｍａｘ／Ｒｍｉｎ）＝４的高性能ＰＴＣ热敏陶瓷材料     

Microstructure of Pd_(77.5)Au_6Si_(16.5) Alloy Droplet Solidified in a Drop Tube Process

The microstructure development of Pd77.5Au6Si16.5 alloy droplet solidified in a drop tube process was studied. It was found that two distinct microstructures, i.e. (Pd,Au)3Si primary phase and Pd+(Pd,Au)3Si eutectic can be obtained when the droplet diameter is within the range between 2.3~0.4 mm. The morpologies of the (Pd,Au)3Si developed from dendrite trunk-like with single branching only into dendrite cluster-like with ternary branching with the decrease of the droplet diameter. When the droplet diameter is about 0.25 mm, the primary phase (Pd,Au)3Si almost disappears and the microstructure mainly shows Pd+(Pd,Au)3Si eutectic. The morphology of the eutectic transforms from fiber-like to plate-like with the decrease of the droplet diameter in the range between 2.3-0.25 mm. When the droplet diameter is about 0.19 mm, the microstructure is only the single phase of Pd solid solution     

Urban radiowave propagation: a 3-D path-integral wave analysis

A discussion concerning the need for three-dimensional (3-D) urban radiowave propagation models is presented and followed by a review of previously published work on this topic using the asymptotic path-integral technique. The limitations and advantages of this technique are explained and it is applied to study diffraction by a small number of canonical geometries. The validity of this technique is verified by comparison with controlled laboratory measurements taken at millimetric wave frequencies. Finally, its ability to classify field components according to their distribution in space is employed in order to analyze the observed field strength distributions in the model environments     

被动锁模复合环形腔掺饵光纤激光器的自启动分析

本文对被动锁模复合环形腔掺饵光纤激光器的自启动工作特性进行了分析，指出谐振腔内残余反射面的存在是阻碍激光器实现自启动锁模的主要原因。利用半导体激光器有源区的折射率随注入电流的变化而改变的特性，在谐振腔中获得了一个可移动腔镜，克服了腔内残余反射面的影响，实现了锁模的自启动。     

The oxidative inducation test applied to medical PVC and other polymers

We have examined the applicability of this simple and effective test to polymer systems widely used in the medical industry. First, it was found that not every polymer examined exhibited a distinct onset of autocatalytic oxidation detectable by DSC. However, for cases where distinct onsets are found, powerful insights can be obtained. These included activation energy of the degradation, thermal oxidative shelf life prediction, and correlation, with product performances. Actual examples are presented to illustrate the utility of the test.     

新颖的基于小波变换的数字水印方案

随着计算机网络技术与多媒体技术的快速发展，数字产品的版权保护已经成为信息技术领域中最重要的问题之一，提出了一种新颖的基于离散小波变换的数字水印方案，该方案利用改进的Pacthwork算法，将水印嵌入到LL子带中，水印信号在解码过程中无需使用原始图像可快速地重嵌入，该算法利用BCH码来降低误码率，应用所提出的算法，把一个32个字符的水印嵌入到图像中，实现结果表明水印是不可察觉的，经过JPEG有损压缩，低通与中值滤波等图像处理操作后仍是鲁棒的。     

砷化镓声电荷转移延迟线的设计与工艺研究

由于声电荷转移(ACT)这一新颖的高速缓冲抽样技术的发明,使得新一代高速高频信号处理器件的实现成为可能。本文研究了第二代平面结构的ACT器件转移沟道的电位分布特性,给出了平面结构ACT延迟线的设计,并研究了ACT器件的工艺实现。