铅钙合金浇铸系统的机-电-液一体化设计

讨论了铅钙合金浇铸系统机械、液压与电器控制构成、工作原理及设计特点。     

Thermal characterization of gallium arsenic nitride epilayer on gallium arsenide substrate using pulsed photothermal reflectance technique

Thermal conductivity of gallium arsenic nitride (GaAsN) epilayer on gallium arsenide (GaAs) substrate prepared by molecular beam epitaxy technique was measured using pulsed photothermal reflectance technique. Three-layer model incorporated thermal boundary resistance was applied to extract the thermal properties from the sample's photothermal response. Within the thickness ranging from 20 to 80 nm, no thickness dependent relationship with thermal conductivity of GaAsN epilayer was found, and the average thermal conductivity is approximately 27 W/mK at room temperature. The thermal boundary resistance at the Au/GaAsN interface is in the order of 10⁻⁸ m²K/W.     

Characterization of PdAg/Al2O3 composite membrane by electroless co-deposition

In this work, PdAg/Al₂O₃ composite membranes prepared by electroless co-deposition technique have been studied. Effects of plating time, Ag composition and total concentration of metal ions on surface morphologies, composition and microstructure of the resulting layers were investigated. Scanning electron microscope, energy dispersive spectrometer and nitrogen permeation technique were used to characterize the as-prepared composite membranes. From the experimental results, it shows that the surface morphology of the deposited PdAg layer is strongly affected by the Ag content of the plating bath. Since large differences of deposition rates and growth modes are observed between Pd and Ag grains, the PdAg layer exhibits the dendritic structure. As the Ag content is approximately 50%, the dendritic structured PdAg layer reveals the largest nitrogen permeability with the smallest size of residual pores. Furthermore, a comprehensive electrochemical analysis is proposed to interpret the composition and structure of the PdAg layer. Eventually, the experimental results are quite consistent with those predicted from the electrochemical analysis.     

Design of a permanent magnetic circuit with air gap in a magnetic refrigerator

We calculate the magnetic field distribution of a permanent magnetic circuit with an air gap in a magnetic refrigerator by a finite-element method, and compare the field strengths of different structural parameters of the magnetic circuit. We show how the structure of the magnetic circuit can be optimized and present some approaches to improve the structure for a specific magnetic circuit. The main purpose is to provide basic parameters for the design of a practical magnetic refrigerator.     

Percolation threshold and morphology of composites of conducting carbon black/polypropylene/EVA

Conducting carbon black (CB), one of the intrinsic semi-conductors, was added into matrix polypropylene (PP) to prepare conducting composites by means of the melt processing method. Another component EVA was mixed into the composites in order to lower the percolation threshold. The percolation threshold of the ternary CB/PP/EVA composites was merely 3.8 vol%, while it was up to 7.8 vol% for the binary CB/PP composites without EVA. The conductivity of the ternary CB/PP/EVA composites was up to 10^–2 S/cm when the CB percentage was 5 vol%, while that of the binary CB/PP was lower than 10^–2 S/cm when the CB percentage was up to 10 vol%. DSC thermograms of the CB/PP/EVA composites showed that the melting peak shifted to low temperature with increasing CB content. The addition of CB and EVA resulted in the decrease of the crystallinity of PP in the ternary composites. The mechanical properties are also discussed. SEM and TEM were employed to study the morphology of the blend system. The results indicated that CB existed in the form of aggregations in the blend system. The smallest unit that formed a percolation network was grape-like aggregates with some small branches, which consisted of some CB particles, rather than the individual particles. This distribution was very valuable for forming conducting paths and for lowering the percolation value.     

The effects of surface-plasma treatment of thin-film hydrogen silesquioxane low k dielectric

Hydrogen silesquioxane (HSQ) is a low dielectric constant material and a potential substitute for conventional silicon dioxide insulator in ULSI system. In this study, the effect of plasma treatment on HSQ films is investigated. The bond structure changes of HSQ after curing, plasma treatment, and water absorption were observed with Fourier transform infrared spectroscopy. Densification of the film occurs after curing, the higher the curing temperature, the lower the dielectric constant and refractive index of the film. Both H₂- and O₂-plasma treatments are employed in this study. The H₂-plasma bombardment enhances the formation of the network structure but raises the moisture absorption of HSQ films. It is found that films subjected to both H₂- and O₂-plasma treatments have lower dielectric constant than those subjected to O₂ treatment alone. Possible mechanisms for the effects of plasma treatments are explored. The residual stress of HSQ film is also studied.     

Producing a compact long-lived plasma formation

A method of producing compact long-lived plasma formations (plasmoids) is described. The method is based on the effect of capture of a high-current relativistic electron beam under conditions of significant overcompensation of space charge of the beam by positive background ions. Requirements are formulated which are placed on the parameters of a plasma-beam system for the realization of this method, and numerical estimates are given of the overall electric charge and energy content of the electron component of a plasmoid. The dynamics of forming a plasmoid are investigated experimentally.Translated from Teplofizika Vysokikh Temperatur, Vol. 42, No. 6, 2004, pp. 843–849.Original Russian Text Copyright © 2004 by B. V. Alekhin, A. E. Dubinov, V. S. Zhdanov, V. G Kornilov, K. E. Mikheev, V. D. Selemir, N. V. Stepanov, V. I. Chelpanov, and O. A. Shamro.     

Optimal design of unit hydrographs using probability distribution and genetic algorithms

A nonlinear optimization model is developed to transmute a unit hydrograph into a probability distribution function (PDF). The objective function is to minimize the sum of the square of the deviation between predicted and actual direct runoff hydrograph of a watershed. The predicted runoff hydrograph is estimated by using a PDF. In a unit hydrograph, the depth of rainfall excess must be unity and the ordinates must be positive. Incorporation of a PDF ensures that the depth of rainfall excess for the unit hydrograph is unity, and the ordinates are also positive. Unit hydrograph ordinates are in terms of intensity of rainfall excess on a discharge per unit catchment area basis, the unit area thus representing the unit rainfall excess. The proposed method does not have any constraint. The nonlinear optimization formulation is solved using binary-coded genetic algorithms. The number of variables to be estimated by optimization is the same as the number of probability distribution parameters; gamma and log-normal probability distributions are used. The existing nonlinear programming model for obtaining optimal unit hydrograph has also been solved using genetic algorithms, where the constrained nonlinear optimization problem is converted to an unconstrained problem using penalty parameter approach. The results obtained are compared with those obtained by the earlier LP model and are fairly similar.