软件漏洞模糊测试的关键分支探索及热点更新算法

在软件开发及应用中,由于具有可复现性,模糊测试能够帮助发现漏洞和有针对性地对漏洞成因进行分析。为了解决模糊测试过程的效率及测试力度等问题,提出了软件漏洞模糊测试的关键分支探索及热点更新算法。该方法通过捕获、分析和利用受检程序在处理测试用例时的执行位置的关键信息,以指导模糊测试过程的探索方向和测试用例的生成。实验结果表明,提出的方法相较于传统随机发散的模糊测试方法在漏洞发现能力上有较大提升,在Otfcc、Swftools等14个开源程序中发现了100余个未被公布的漏洞,为模糊测试用于软件漏洞检测提供了新的可靠途径。     

Performance of N95 elastomeric respirators in high humidity and high coal dust concentration environmentOA

High humidity and high dust concentration in deep coal mines may severely challenge the performance of respirators worn by coal miners.This paper aims at quantitatively evaluating the respirators used in deep coal mines and providing scientific guidance for the respiratory protection of miners.Based on the self-designed in-situ PM_2.5collector,controllable PM_2.5generator,human breathing simulator,and respirator simulation testing system,under the simulated deep mine working ...     

An analysis of EMG electrode configuration for targeted muscle reinnervation based neural machine interface.

Targeted muscle reinnervation (TMR) is a novel neural machine interface for improved myoelectric prosthesis control. Previous high-density (HD) surface electromyography (EMG) studies have indicated that tremendous neural control information can be extracted from the reinnervated muscles by EMG pattern recognition (PR). However, using a large number of EMG electrodes hinders clinical application of the TMR technique. This study investigated a reduced number of electrodes and the placement required to extract sufficient neural control information for accurate identification of user movement intents. An electrode selection algorithm was applied to the HD EMG recordings from each of four TMR amputee subjects. The results show that when using only 12 selected bipolar electrodes the average accuracy over subjects for classifying 16 movement intents was 93.0 (+/-3.3)%, just 1.2% lower than when using the entire HD electrode complement. The locations of selected electrodes were consistent with the anatomical reinnervation sites. Additionally, a practical protocol for clinical electrode placement was developed, which does not rely on complex HD EMG experiment and analysis while maintaining a classification accuracy of 88.7+/-4.5%. These outcomes provide important guidelines for practical electrode placement that can promote future clinical application of TMR and EMG PR in the control of multifunctional prostheses.     

重庆市荆襄式磷矿地质特征及成矿规律分析

重庆市荆襄式磷矿主要分布在渝东北的城口—巫山一带。评述了该类磷矿地层、构造、成矿特征等,总结了荆襄式磷矿成矿规律,为重庆市磷矿资源找矿及预测提供参考。     

Fe~(2 ),NH_4~ 对氧化亚铁硫杆菌氧化黄铁矿的影响

采用摇瓶试验方法,探讨了浸矿初期介质中Fe2 ,NH4 对T·f菌氧化黄铁矿的影响,试验表明,Fe2 ,NH4 的存在有助于提高生物活性和生物量,Fe2 的浓度在420～640mg／L之间,pH值在1．8左右,可明显减少沉淀物的产生,有利于浸矿的有效进行．     

基于阅读2.0模式,高校馆学生读者网络阅读推广分析

阅读2.0是全民阅读推广的新理念.本文简述了阅读2.0的明显特征及两大优势,并结合长春高校图书馆的调查数据,分析了高校大学生网络阅读现状.     

LabView实现远程数据采集与传输

阐述了在NI Lab View平台上结合TCP/IP协议进行数据传输的工作方法，并给出对工业现场数据采集传送与监控的仿真实例。     

等离子喷焊铜基自熔性合金的研制

为了克服铜铁异种材料喷焊过程中易产生焊缝裂纹和基体裂纹的倾向,研制开发了一种Cu-Ni-Sn自熔性合金粉末材料.通过对Cu-Ni-Sn粉末材料的化学成分的设计,喷焊层的组织显微结构及抗腐蚀性能的综合分析,认为该材料等离子喷焊工艺性能良好,焊层耐腐蚀效果十分明显.在生产实际中应用等离子喷焊制备Cu-Ni-Sn焊层,能明显提高粉末材料的熔敷率和性能,并且改善劳动工作环境.该合金性能优于传统材料,值得推广.     

Microstructure developed in the surface layer of Ti-6Al-4V alloy after sliding wear in vacuum

Microstructural changes in the surface layer of Ti-6Al-4V alloy after sliding wear in vacuum have been studied by means of scanning and transmission electron microscopy (SEM and TEM). The wear rates of Ti-6Al-4V alloy in vacuum were measured under different sliding velocities and loads. The experimental results showed that a severely deformed layer with a grain size of 50–100 nm and thickness about 70 μm was formed underneath the worn surface. Under the slower sliding velocities, the substructure of the layer had a high dislocation density, while under higher sliding velocities, twins were found to exist in the substructure. A process by which the deformed layer formed has been proposed and the deformation of materials at the contacting spots of the Ti-6Al-4V sample is discussed.