The Transformation of Carbides during Austenization and Its Effect on the Wear Resistance of High Speed Steel Rolls

The transformation of carbides with austenization time of a high speed steel (HSS) roll material, manufactured by a centrifugal casting method, has been studied. The correlation between wear resistance and the type, morphology, volume fraction, and distribution of the carbides has also been investigated. Microstructural observations, X-ray diffraction (XRD) analysis, hardness measurements, and energy dispersive spectroscopy (EDS) have been used to characterize the carbides. The type and volume fraction of carbides were found to change with austenizing time. During austenization, the transformation of the M₃C carbides can be postulated as M₃C + γ-Fe → M₂C, with much finer nodular and rodlike MC carbides also forming through a solid-state transformation. The M₂C carbide decomposes as M₂C + γ-Fe → MC + M₇C₃ + M₆C. The decomposed carbide substantially maintains a platelike shape until the end of decomposition. The most important finding of this study is that austenization results in changes in the type, morphology, volume fraction, and distribution of carbides and that it can be controlled to produced a homogeneous distribution of hard carbides, resulting in an improvement in the wear resistance of HSS rolls. This finding may be of great use for the industrial production of HSS rolls.     

新年贺词

雄鸡高唱 ,万象更新 !带着盎然春意 ,带着勃勃生机 ,2 0 0 5年向我们大步走来 !值此新年到来之际 ,谨向关心、爱护、支持《消防技术与产品信息》杂志的各界朋友和广大读者致以亲切的问候和最美好的祝愿 !党的十六届四中全会通过的《中共中央关于加强党的执政能力建设的决定》提出 ,要“发挥社团、行业组织和社会中介组织提供服务、反映诉求、规范行为的作用 ,形成社会管理和社会服务的合力”,对社团、行业组织寄予厚望。我们决心在公安部和中国科协的领导下 ,紧紧围绕消防中心工作 ,进一步做好协会的各项工作 ,为发展我国的消防事业服务 ,更…     

西门子S7-200可编程控制器在气化油点火技术中的应用

以西门子S7—200PLC为核心。利用火检探头。温度、压力等传感器，结合STEP 7 MicmwIN V3．1以及ProTool Pro CS工业组态软件完成了对点火过程的自动控制。实现了西门子S7—200PLC在大型发电厂410吨级蒸汽锅炉“气化油直接点燃煤粉技术”中的应用。提高了锅炉点火系统运行的自动化水平。     

Optimal phases for a family of quadriphase CDMA sequences

Signature sequences with good even even and odd (or polyphase) correlations are crucial for asynchronous code-division multiple access (CDMA). When the data sequence is random, the even and odd (or polyphase) correlations are equally important. However, for most known signature sequences, only their even correlations were analyzed. It appears that determining the odd (or the polyphase) correlations is generally a very hard problem since the odd (or the polyphase) correlations depend on the phases of the signature sequences. Sole (1989), Boztas, Hammons, and Kumar (1992) found a family of quadriphase sequences that are asymptotically optimal. These sequences gain a factor √2 in terms of their maximum periodic even correlations when compared with the best possible binary phase-shift keying (BPSK) sequences. We find the optimal phases of these sequences. The optimality is in the sense that at these phases, the mean square values of the even, odd, and the polyphase correlations are minimal, and achieve the Welch (1974) bound-equality simultaneously. Furthermore, we show that at these phases, the average user interference of these sequences is always smaller than that of the ideal random signature sequences. Comprehensive analytical and numerical results show that good phase sequences can offer a nonnegligible amount of gain over bad phase sequences at modest and high signal-to-noise ratios     

微波高压提取快速测定饲料含氟量的探讨

采用微波高压制样技术,快速提取饲料中的氟元素,结合氟离子选择性电极标准添加和电位极差测试方法,能够快速、准确地测试饲料中的含氟量     

Analogue implementation of a neural network controller for UPSinverter applications

An analogue neural-network controller for UPS inverter applications is presented. The proposed neural-network controller is trained off-line using patterns obtained from a simulated controller, which had an idealized load-current-reference. Simulation results show that the proposed neural-network controller can achieve low total harmonic distortion under nonlinear loading condition and good dynamic responses under transient loading condition. To verify the performance of the proposed NN controller, a hardware inverter with an analogue neural network (NN) controller (using mainly operational amplifiers and resistors) is built. Additionally, for comparison purposes, a PI controller with optimized parameters is built. Experimental results confirm the simulation results and show the superior performance of the NN controller especially under rectifier-type loading condition. Implementing the analogue neural-network controller using programmable integrated circuits is also discussed     

Nonregular feedback linearization: a nonsmooth approach

In this note, we address the problem of exact linearization via nonsmooth nonregular feedback. A criterion of nonregular static state feedback linearizability is presented for a class of nonlinear affine systems with two control inputs, and its application to nonholonomic systems is briefly discussed.     

温度,压力对漂移室气体增益的影响

研究了温度及气体压力对漂移室（工作于正比区）气体放大倍数的影响，温度和气体压力的变化范围分别是５￣４０℃及９０￣１０５ｋＰａ。用实验数据拟合得到了函数关系并测量了几种饱和度下函数中的参数值。     

Fracture toughness evaluation by tensile and charpy-type tests based on micromechanical models of materials

With the aim of applying micromechanical approaches to fracture mechanics, we carried out dynamic tensile tests and instrumented impact tests with Charpy-type specimens both with a V-shaped notch and with a crack. We compared two micromechanical strain-rate-dependent models based on a modified Gurson flow function by simulating various dynamically loaded specimens. The results of the tests indicate that the critical void volume fractionf _c and the characteristic lengthl _c are practically independent of the strain rate and the geometry of the specimen. The behavior of the specimens subjected to strains and fracture can be characterized by the parameters determined in tensile tests and impact tests with the Charpy-type specimens. By the three-dimensional analysis based on the strain-rate-dependent Gurson model, we predict the onset of crack growth inside the Charpy specimen.Fraunhofer Institut für Werkstoffmechanic, Freiburg, Deutschland. Published in Fiziko-Khimicheskaya Mekhanika Materialov, Vol. 30, No. 2, pp. 77–84, March–April, 1994.