The Effect of Growth Pressure and Growth Rate on the Properties of Mg-Doped GaN

In this work, the effects of growth pressure and growth rate on electrical and structural properties of Mg-doped GaN were investigated. It has been shown that enhanced growth rates induced by higher growth pressures may lead to decreased structural and electrical properties of p-type GaN layers. If the growth rate is kept unchanged, higher growth pressures will be beneficial for the quality of Mg-doped GaN due to the enhanced NH₃ overpressure.     

背入射Al_(0.42)Ga_(0.58)N/Al_(0.40)Ga_(0.60)N异质结p-i-n太阳光盲紫外探测器

在蓝宝石上用MOCVD生长的材料制备了背入射Al0.42Ga0.58N/Al0.40Ga0.60N异质结p-I-n太阳光盲紫外探测器.从器件的正向Ⅰ-Ⅴ特性曲线计算了理想因子n与串联电阻Rs分别为3和93?器件在零偏压下275nm峰值波长处的外量子效率与探测率分别为9%和4.98×1011cm·Hz1/2/W,分析表明Al0.42Ga0.58N窗口层在275nm波长处的透过率仅为15.7%,是器件外量子效率和探测率偏低的原因之一.     

双绞传输线电磁兼容特性的FDTD分析

将曲线坐标系中的时域有限差分法（FDTD）拓展到空间为任意媒质情形，然后针对双绞传输线的特殊结构综合运用曲线坐标系、圆柱坐标系、旋转坐标系和子域连接法进行空间网格划分、FDTD建模，并通过求解双绞传输线和平行传输线的特性阻抗对该建模的准确度进行了验证，最后在空间线源激励下对双绞线和平行线的电磁兼容特性进行了比较，可以看出双绞线对空间电磁场的耦合能力远远低于平行线。     

激光熔覆钴基合金涂层的组织结构

利用5kWCO2连续激光器在16Mn钢表面进行激光熔覆钴基合金涂层，研究了激光覆合金涂层的显微组织形貌，相结构以及显微硬度。激光熔覆涂层可分为三个区域：熔化区（合金层）结合区及基材热影响区。合金涂层由γ-Co枝晶及其间的共晶组织组成，合金涂层的主要组成相为γ-Co和（Cr,Fe)7^C3。     

Recent Advances of Cell Membrane‐Coated Nanomaterials for Biomedical Applications

Surface modification of nanomaterials is essential for their biomedical applications owing to their passive immune clearance and damage to reticuloendothelial systems. Recently, a cell membrane‐coating technology has been proposed as an ideal approach to modify nanomaterials owing to its facile functionalized process and good biocompatibility for improving performances of synthetic nanomaterials. Here, recent advances of cell membrane‐coated nanomaterials are reviewed based on the main biological functions of the cell membrane in living cells. An overview of the cell membrane is introduced to understand its functions and potential applications. Then, the applications of cell membrane‐coated nanomaterials based on the functions of the cell membrane are summarized, including physical barrier with selective permeability and cellular communication via information transmission and reception processes. Finally, perspectives of biomedical applications and challenges about cell membrane‐coated nanomaterials are discussed.     

激光星间链路中天线扫描捕获技术实验室模拟研究

对激光星间链路中的天线扫描捕获技术进行了理论分析和模拟实验研究。首先建立了天线扫描捕获理论模型 ,在此基础上对影响系统捕获性能的各主要参量之间关系进行了数值仿真分析。设计实现了一套天线扫描捕获实验室模拟系统 ,通过模拟实验对部分数值分析结果进行了验证 ,实验结果与数值分析结果基本符合。     

A Low-Complexity Compressive Sensing Algorithm for PAPR Reduction

One of the major challenges in orthogonal frequency division multiplexing system is its high peak-to-average-power ratio (PAPR). Among the existing PAPR reduction technologies, clipping is the most often used one due to its simplicity of implementation. But it induces signal distortion. In this paper, we propose a new PAPR reduction method which introduces compressive sensing theory to help the clipping and signal recovery processes. Our method has superior symbol-error-rate (SER) performance compared with traditional clipping, and at the same time has better PAPR reduction performance compared with traditional tone reservation based algorithms. What is more, different from the existing high-complexity compressive sensing based scheme which tries to solve an optimization problem, the proposed algorithm uses orthogonal matching pursuit scheme to recover the distorted signals, thereby it significantly reduces the computational complexity with the same PAPR reduction efficiency. Simulation results show that our proposed scheme can achieve dramatic PAPR reduction with only about \(10\,\%\) of the existing method, while still keeps good SER performance.     

多重PCR方法检测食品中转基因成分

根据转基因农作物中最常用的花椰菜花叶病毒启动子 (CaMV 3 5S)和根癌农杆菌终止子(NOS)的序列 ,设计合成了两对不同的引物和相对应的两种荧光双链探针 (FDCP) ,分别建立了多重PCR、应用FDCP的实时荧光PCR同时检测转基因成分 3 5S启动子和NOS终止子的方法 .并利用该套方法对马铃薯、大豆、玉米、甜椒、番茄等实物样品进行了检测 ,发现 1 3份样品中有 6份检出3 5S启动子、NOS终止子 ,其余 7份样品的检测结果为阴性 .表明作者建立的多重PCR方法能有效检测出 3 5S和NOS成分 ,其中多重PCR法具有灵敏度高、特异性好的特点 ,多重荧光PCR法则更为简便、快速、准确     

Fabrication of Anticounterfeiting Nanocomposites with Multiple Security Features via Integration of a Photoresponsive Polymer and Upconverting Nanoparticles

Anticounterfeiting materials are used to distinguish real banknotes, products, and documents from counterfeits, fakes, or unauthorized replicas. However, conventional anticounterfeiting materials generally exhibit a single anticounterfeiting function, resulting in a low level of security. Herein, a novel anticounterfeiting nanocomposite is demonstrated with numerous prominent security features. The nanocomposite is fabricated by doping upconverting nanoparticles (UCNPs) in a photoresponsive azobenzene-containing polymer (azopolymer). Because of the cis–trans photoisomerization of the azopolymer, the nanocomposite exhibits photoinduced reversible color changes suitable for anticounterfeiting applications. Additionally, the hard nanocomposite can be converted to a rubber-like soft solid by light irradiation. Imprinted microstructures are fabricated on the photosoftened nanocomposite, which result in photonic colors. Moreover, polarization-dependent structures are fabricated on the nanocomposite via photoinduced orientation for encryption. Importantly, UCNPs in the nanocomposite emit visible light upon excitation by near-infrared light, enabling the observation of various anticounterfeiting structures with high contrast. An advantage of the anticounterfeiting nanocomposite is that the security features can be observed by the naked eye for quick discrimination and can be analyzed using laboratory equipment for higher accuracy. The anticounterfeiting nanocomposite is easily processed on paper, glass, and plastic, which demonstrates its potential anticounterfeiting functions for banknotes, wines, and medicines.     

工科类计算机与信息学院教学质量评估指标体系探讨

工科是我国第一大学科,也拥有最多的专业和师生.如何保障工科类本科高校的教学质量对我国高等教育的健康发展起着至关重要的作用。目前我国大多数工科高校都开设了计算机与信息学院,但很多计算机与信息学院都经历了重组与独立,其开设时间较短,管理经验不足,难以保证高质量的教学。笔者通过对国内几所工科类计算机与信息学院进行的教学质量评估的研究,初步制定了我国工科类计算机与信息学院的教学质量评估指标体系。