加压下二氧化碳在二甲基甲酰胺中的溶解度研究

本文报道了二氧化碳在二甲基甲酰胺中的溶解度,实验温度分别为15、20、25、30、35、40、45℃,实验压力为207.21—1684.02kPa.并且提出一个考虑了过量熵的、用溶度参数表示的活度系数方程.     

波节式换热管压缩失稳试验研究

通过对不同材料、直径和壁厚的波节式换热管进行压缩失稳试验,绘出应力和应变强度关系曲线,指出直光管经胀管成型为波节管后,应力状态分布明显不同于光管,壁厚和直径等规格尺寸的不同会影响波纹管的强度性能.     

浅谈电子产品对儿童的影响及对策

在现代社会中,平板电脑、智能手机在人们日常生活的方方面面发挥着巨大的作用。通过分析电子产品在儿童和青少年的视力、身体发育、社交能力和学习能力等方面的负面影响,提出了加强亲子陪伴、合理引导控制等应对措施。     

悬浮液进样-火焰原子吸收光谱法测定茶叶中的微量铬

将茶叶悬浮于琼脂胶体中制成悬浮液 ,直接喷入空气 -乙炔火焰 ,用火焰原子吸收光谱法测定茶叶中的微量铬 ,方法简便、快速、灵敏度和精密度高、测定结果与用灰化法处理样品一致 ,检验表明 ,两种样品前处理方法之间无显著性差异。相对标准偏差为 3.4 %～ 6 .1% ,加标回收率为 95 .7%～ 10 3.8 %。     

Study of different effect on foaming process of biodegradable bionolle in supercritical carbon dioxide

Microcellular foaming of biodegradable Bionolle in supercritical CO₂ has been produced. The effects of a series of variable factors, such as saturation temperature, saturation pressure, and depressurization time and step on the foam structures and density, were studied through measurement of density and SEM observation. The experimental results show that higher saturation temperatures lead to an increase in bulk densities; and different depressurization time and step result in different product cell morphology. In addition, at some saturation temperature, the orientation of the cells can be found in the product morphology. XRD experimental results show that the foaming treatment with SC CO₂ increased the crystallinity of Bionolle. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2901–2906, 2006     

Deformation and failure study of surrounding rocks of dynamic pressure roadways in deep mines

In order to understand the change rules of stress-displacement in surrounding rocks of dynamic pressure roadways in deep mines and to obtain a theoretical basis for analyses of roadway stability and designs of support,we established a coupling equation of adjacent rock strength,mining stress and supporting resistance on the basis of an elastic-plastic theory of mechanics.We obtained an analytical solution for stress and displacement distribution of elastic and plastic regions in surrounding rock of dynamic pressure roadway..Based on this theory,we have analyzed the changes in stress-displacement in elastic and plastic regions of surrounding rocks of dynamic pressure roadways in the Haizi Coal Mine.The results show that:1) radial and tangential stress change violently within the first 4 m from the inner surface of a roadway after excavation;radial stress increases while tangential stress decreases within a range of about 6 m from the inner surface of the roadway as a function of q3;2) radial and tangential stress increase with an increase in the mining pressure coefficient k;the increase in the rate of tangential stress is greater than that of radial stress;3) the radial displacement of the inner surface of roadways decreases with an increase in q3,provided that k remains unchanged.     

Solid state interfacial reactions in electrodeposited Ni/Sn couples

Ni/Sn couples,prepared by sequentially electroplating Ni layers and Sn layers on metallized Si wafers,were employed to study the mierostructures and growth kinetics of Ni-Sn intermediate phases,when the Ni/Sn couples were aged at room temperature or annealed at temperatures from 150 to 225℃for various times.The results show that the NiSn phase and Ni_3Sn_4 phase are formed,respectively,in the aged couples and annealed couples.The Ni_3Sn_4 layer is continuously distributed between the Ni and Sn sides in t...     

以Kriging可靠度分析为基础的半无限规划

基于可靠度的结构优化设计是国内外积极探索和研究的重要课题,但是传统的两层次算法的最大缺点就是计算效率很低,甚至有时不能够得到收敛解.因此有必要对这一类问题进行研究和探索,寻找新的计算方法以降低计算成本.本文将Kriging方法应用于带可靠性约束的优化设计中,将双层规划问题转化为一个带有无穷多个约束的半无限规划问题,然后使用Kriging模拟来近似地替代结构重分析,使得优化过程中的结构重分析次数减少,在保证计算精度的同时使计算效率得到较大提高.     

电磁领域中复超越方程的遗传算法求解方法

将遗传算法与参数跟踪策略有效结合,跟踪过程中进行搜索域压缩与位移操作,形成了一种功能强大的新算法,可成功应用于电磁领域中各种各样复超越方程的高精度求解问题.在算法实现过程中,使用参数跟踪策略有效地缩小了搜索区域,保证了解的单一性,提高了运算速度;使用动态搜索域提高了解的精度;应用三阶差商公式预估新的搜索中心,使运算速度得以进一步提高.应用本文发展的算法详细求解了终端短路法测量材料的复介电常数时得到的复超越方程和部分填充矩形波导的特征方程,计算结果表明该算法能够轻松地解决复超越方程中的多值问题,解集完备性好,算法鲁棒性强.     

基于KPCA和SVM的火箭发动机试验台故障诊断方法

为了解决液体火箭发动机试验台的故障诊断问题,提出了一种基于核主元分析(KPCA)特征提取和支持向量多分类机(SVM)的故障诊断方法,该方法首先利用核主元分析对试验台标准故障样本进行特征提取,通过特征分析,建立适合于试验台故障状态识别的层次多分类支持向量机,并对其进行训练,然后将试验数据在主元上投影,输入到训练好的支持向量多分类器,对试验台故障状态进行识别.该方法充分利用了核主元分析强大的非线性特征提取能力和支持向量分类机良好的小样本泛化特性,解决了试验台故障诊断中的小样本、非线性模式识别问题.对试验台的试验结果表明,该方法是有效的、可行的.