A geometric method of sector decomposition

We propose a new geometric method of IR factorization in sector decomposition. The problem is converted into a set of problems in convex geometry. The latter problems are solved using algorithms in combinatorial geometry. This method provides a deterministic algorithm and never falls into an infinite loop. The number of resulting sectors depends on the algorithm of triangulation. Our test implementation shows smaller number of sectors comparing with other existing methods with iterations.     

Lateral Inhomogeneity in the Electronic Structure of a Conjugated Poly(3‐hexylthiophene) Thin Film

How annealing influences the morphology of a highly regioregular poly(3‐hexylthiophene) (RR‐P3HT) film at the substrate interface as well as the lateral inhomogeneity in the electronic structure of the film are elucidated. Whereas previous studies have reported that high‐molecular‐weight (MW) RR‐P3HT films tend to show low crystallinity even after annealing, it is found that high‐MW RR‐P3HT does show high crystallinity after annealing at high temperature for a long time. Photoemission electron microscopy (PEEM), X‐ray photoemission spectroscopy, and ultraviolet photoemission spectroscopy results clearly resolve a considerable lateral inhomogeneity in the morphology of RR‐P3HT film, which results in a variation of the electronic structure depending on the local crystallinity. The PEEM results show how annealing facilitates crystal growth in a high‐MW RR‐P3HT film.     

(p,q)-Logical completeness for output-coherent sets of (p,q)-Logical functions and an application of the set to image processing

We have previously proposed an idea of p-valued input, q-valued output threshold logic to synthesize many-valued, p-valued, logical networks, and derived the condition for (p, q)-logical completeness for the output-closed set of (p, q)-logical functions. In this paper, the condition for (p, q)-logical completeness for the output-coherent set F of (p, q)-logical functions is described, and the proof is given in almost the same way as for the output-closed set. The output-coherent set F is applied to image processing. That is, a restoration scheme is described for images to which normal random noise is added.     

Dynamic Characteristics Analysis of Two‐DOF Oscillatory Actuator and Experimental Verification of Prototype

Recently, linear oscillatory actuators have been used in a wide range of applications. In particular, small linear oscillatory actuators are expected to be used in haptic devices by being extended to provide multi‐degree‐of‐freedom motion with arbitrary acceleration. In this paper, we propose a compact two‐DOF oscillatory actuator that can move in various directions on a plane. The static and dynamic characteristics of the actuator are determined by the 3D finite element method. The effectiveness of this method is shown through a comparison of the measured results with the experimental results from a prototype. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 186(1): 58–65, 2014; Published online in Wiley Online Library ( wileyonlinelibrary.com ). DOI 10.1002/eej.22312     

Asymmetric electric double layer capacitors using carbon electrodes with different pore size distributions

Asymmetric capacitors composed of carbon electrodes with different pore size distributions (PSD) were constructed in order to study the fundamental relationship between the PSD of positive and negative carbon electrodes and the performance of electric double layer capacitors. The performance of asymmetric capacitors in a non-aqueous electrolyte solution (TEMA·BF₄/PC) was found to be governed by the PSD of the carbon used in the negative electrode. Capacitance depends on the BET surface area of the negative electrode and the rate performance depends on its mesoporous surface area. These results were explained by the fact that it is more difficult to adsorb large solvated cations (TEMA⁺) in micropores (less than 2 nm wide) than in mesopores (2-50 nm wide), and that this is more difficult with a higher rate of charge-discharge.     

Observation of the solid-state formation of a TTF–CA complex by terahertz spectroscopy

The solid-state synthesis of a tetrathiafulvalene–chloranil (TTF–CA) complex was demonstrated, and progress in the formation of the complex was monitored using a GaP Raman terahertz (THz) spectrometer. Clear transitions in the THz absorption spectra indicated that the mixture of TTF and CA became the black phase TTF–CA complex. The results of X-ray diffraction, Raman scattering, and FTIR spectra are presented as supporting evidence.     

Geometric control and tuneable pore size distribution of buckypaper and buckydiscs

The fabrication of buckypaper from unfunctionalised multi-walled carbon nanotubes (MWCNTs) without the aid of surfactants or surface modification techniques is accomplished through a novel and quick frit compression method. The dimensions can be controlled through the size of the syringe housing and the through the mass of carbon nanotubes added. Their thicknesses are typically much larger than surfactant-cast buckypaper and range from 120 μm up to 650 μm; buckypaper with thicknesses larger than 500 μm we call buckydiscs. Buckypaper and buckydiscs are mechanically robust to handle, flexible, stable in solvents and possess larger porosities than Triton-X100 cast buckypaper. They also exhibit a memory effect when bending wetted samples, returning to their former geometry on drying. Buckypaper and buckydiscs were studied by mercury intrusion porosimetry to reveal a defined distribution of mesopores and small macropores that is, along with their density and apparent free volume, dependant on the casting solvent and therefore tuneable. Moreover, the frit compression system also allows control over the 3-dimensional geometry of the buckydiscs during the casting process.     

Development of fabrication process for Ag/polydiacetylene (core/shell) hybridized nanocrystals

Core/shell hybridized nanocrystals composed of Ag nanoparticle core and polydiacetylene shell were fabricated successfully by means of “co-reprecipitation/microwave irradiation method”. The hybridized nanocrystals were characterized using transmission electron microscopy (TEM) observation and UV–vis absorption spectroscopy. UV–vis spectral measurements revealed that polydiacetylene shell was the red phase while π-conjugated backbone is distorted. Detailed mechanism of formation of the red phase was discussed.     

Synthesis of soluble poly(9,10-dihydrophenanthrene-2,7-diyl)s. A new class of luminescent poly(p-phenylene)s with ethylene type bridges

Poly(9,10-dihydrophenanthrene-2,7-diyl)s with -OSi(R)₂(R′) groups at the 9,10-positions were synthesized by dehalogenative polycondensation of the corresponding monomers by using a zerovalent nickel complex. They showed number average molecular weights (M_n's) of 9800-69,000 and high quantum yields (62%-quantitative) in photoluminescence. Palladium catalyzed copolymerization of 2,7-dibromo-9,10-dihydrophenanthrene having -OCH₃ or -OSi(R)₂(R′) groups at the 9,10-positions with diethynyl- or diboronic-aromatic compounds also gave photoluminescent polymers with high quantum yields.     

Development of a new loading test apparatus for microfocus X-ray CT and its application to the investigation of soil behavior surrounding driven open-section piles

In recent years, X-ray CT scanners with task-specific modifications, such as microfocus and/or a synchrotron, have been widely implemented in a variety of fields, including medical and industrial fields. Since microfocus X-ray CT systems enable the visualization of whole samples, and also yield a relatively high resolution of the region of interest in the sample, they are commonly utilized in the fields of soil mechanics and geotechnical engineering. This paper describes a novel loading test apparatus that is specifically designed for microfocus X-ray CT systems capable of performing loading tests to investigate soil behavior during the installation of driven open-section piles. The loading tests were designed to take the micro-level spatial resolution of microfocus X-ray CT systems into account. Digital image correlation (DIC) is subsequently implemented to analyze the obtained CT images, making it possible for measurements to be taken of the displacement fields in the ground following installation of the model pile. Finally, the versatility of this novel test apparatus is proof of its high potential for application in different types of loading tests.