交流电量采集技术在LF炉的应用

介绍交流电量采集系统的设计,及其在LF精炼炉中的应用.     

Preparation and characterization of polyelectrolyte copolymers containing methyl methacrylate and 2-hydroxyethyl methacrylate. I. Polymers based on methacrylic acid

Acidic polyelectrolyte copolymers containing 2-hydroxyethyl methacrylate (HEMA), methyl methacrylate (MMA), and methacrylic acid (MAA) were prepared by free radical polymerization to high conversion in solution. Copolymer yields were obtained by gravimetry (all in the 30–50% range), relative molecular weights estimated by intrinsic viscosity measurements (all in the 50–70 cc/g range), tacticity by ¹³C nuclear magnetic resonance (NMR) spectroscopy (all polymers predominantly syndiotactic with some atactic content), and composition by acid/base titrations in conjunction with ¹H-NMR spectroscopy (all close to the monomer charge ratios). Acid strengths or apparent pKa's were examined as a function of extent of ionization. Measurements performed in water indicated that the compact/extended coil transformation in predominantly syndiotactic polymethacrylic acid occurs also in copolymers of similar tacticity containing moderate to high concentrations of MAA. The apparent pKa of such polymers containing only small amounts of MAA did not vary with extent of ionization, indicating a low degree of interaction between the acid groups. In copolymer pairs containing similar amounts of MAA but differing HEMA and MMA contents, the polymer containing more HEMA appeared the stronger acid, presumably due to a better solvation of that polymer which would increase the net spatial charge–charge separation and decrease cooperative effects that lead to suppressed ionization.     

Copolymeric photoinitiators containing in‐chain thioxanthone and coinitiator amine for photopolymerization

Two kinds of copolymeric macromolecular photoinitiator, PTXPM and PTXPC, were prepared by introducing methylacryloyl or cinnamoyl groups to the side chain of PTXP. The photopolymerizations of poly(propylene glycol)diacrylate (PPGDA) and trimethylolpropane triacrylate (TMPTA), using PTXPM and PTXPC as photoinitiators, were studied by photo‐DSC. PTXPM and PTXPC have UV–vis spectra similar to that of PTXP with blue‐shift absorption maxima. The photopolymerization behavior of TMPTA, initiated by three photoinitiators, appears similar to that of PPGDA. Compared with PTXP and PTXPC, PTXPM gives higher polymerization rate and final conversion, in photopolymerization of PPGDA and TMPTA, which shows that the introduction of methyl acrylate to the PTXP chain has a greater effect on photopolymerization of PPGDA and TMPTA than that of cinnamoyl acrylate. The polymerization rate and final conversion, for photopolymerization of PPDGA initiated by PTXP, can be more effectively increased by the introduction of methyl acrylate group to the PTXP chain, than are those for TMPTA. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2395–2400, 2004     

Purification of 2-mercaptobenzothiazole by solvent extraction

−Purification of 2-mercaptobenzothiazole (91.9% purity) by solvent extraction was studied. The extraction of impurities present in crude 2-MBT (e.g. benzothiazole, sulfides and sulfur containing compounds) was carried out at temperatures between 70-180°C using various solvents and their mixtures of different polarity. The highest purity of 2-MBT, above 99% was obtained using nitrobenzene, toluene and ethanol, even at a concentration of 2-MBT above 50 wt%. Increasing temperature and decreasing concentration of the raw material have a positive influence on the purification process. A comparable efficiency of purification was observed also with mixed solvents, (toluene with ethanol, acetone and aniline) possessing the same polarities. A correlation between the polarity indexes (PI) of mixed solvents and experimentally obtained purity of 2-MBT was found. The highest purity of 2-MBT provides extraction of the raw material with mixed solvents having PI 3.8-4.4.     

Preparation of micron‐size monodispersed PS/P(St/MAA) microspheres by seeded dispersion polymerization

Uniform polystyrene (PSt) particles with the size of 1.9 μm were first prepared via dispersion polymerization, and then used as the seeds in a second‐stage dispersion copolymerization of styrene (St) and methacrylic acid (MAA) to produce carboxyl‐carrying microspheres. The PSt seed particles were swollen by monomer mixture of St and MAA, including an oil‐soluble initiator 2,2′‐azobisiso‐butyronitrile (AIBN), before polymerization. Finally, uniform PS/P(St/MAA) (polydispersity index, PDI = 1.02) microspheres with the size of 2.2 μm were obtained. The average particle size and size distribution of the final microspheres were investigated. MAA contents between 54 and 97 mg/g were detected from the PS/P(St/MAA) particles produced under different conditions. Dispersion medium has great influence on the kinetics of polymerization, due to its effect on the partitioning of monomers, solvents, and initiator in the particle phase, probably as well as on the conformation of the dispersion agent on the surface of the particles. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3586–3591, 2006     

A Novel Inorganic Polymer as Cathode Material for Secondary Lithium Batteries

Summary: This paper introduces a new inorganic poly(phosphazene disulfide) material. With unique element composition and molecular structure, the polymer has noncombustible safety and preferable conductivity. When used as cathode material for rechargeable lithium batteries, the polymer's first discharge capacity is as high as 467.9 mAh · g^?1, which can be retained at 409.9 mAh · g^?1 after 60 repeated cycles. Therefore, it has a great application potential in the field of lithium batteries.

Replacement of the Cl atoms by S? S groups by refluxing Na₂S₂ and linear poly(dichloro‐phosphazene).     

Experimental research on drag reduction by polymer additives in a turbulent pipe flow

In order to investigate the effects of injection position on drag reduction as well as further the effects of polymer additives on turbulent structures, LDA measurements of turbulent pipe flows were conducted. The results show that the amount of drag reduction grows with the increase of the Reynolds number, and injecting the polymer at the centre of pipe is more effective than at the wall. Due to the addition of polymer solution, the axial, radial r.m.s. velocity fluctuations and Reynolds stress decrease over the entire pipe cross‐section, the time auto‐correlation coefficients of axial and radial velocity fluctuation at the centre of pipe decay more slowly, the number of spectrum peaks is decreased, and the peak shifts towards lower wave numbers. The results also reveal that, due to the addition of polymer solution, the large‐scale vortices are enhanced and small‐scale vortices are suppressed.     

长江三峡库区支线航空运输发展对策研究

长江三峡库区丰富的自然与人文旅游资源,狭长的地形与复杂的山地环境特征,决定了支线航空有广阔的前景。支线航空运输具有建设投资省、方便快捷、服务半径大等优点,是三峡库区发展旅游的重要基础条件。分析了长江三峡库区航空运输的现状及存在问题,结合区域城镇体系建设及综合交通发展,提出了支线航空交通的前景与发展对策。     

塔里木河“二源一干”生态供水潜力研究

为解决塔里木河干流水资源短缺、流域损失水量过大、用水效率低下、农业灌溉用水挤占生态用水等问题,基于“节水优先”的治水方针,以塔里木河二源流(阿克苏河、叶尔羌河)及其干流(“二源一干”)的山区水库群和平原水库群为研究对象,兼顾塔里木河干流的农业灌溉用水、生态用水、工业用水、生活用水等多目标,构建并求解了现状水平年和远景规划年的山区与平原水库群联合调度优化模型,分析了塔里木河干流的生态供水潜力和山区水库群联合调度的贡献。结果表明：仅通过干流平原水库群联合调度,农业灌溉用水和生态用水的供水保证率难以满足设计要求;通过山区与平原水库群优化调度,在远景规划年各行业均满足设计保证率要求,体现了山区水库群显著的调控性能和“节水优先”治水方针的合理性和可靠性;远景规划年塔里木河干流的生态供水潜力为2.84亿m³,可为塔里木河下游生态保护与修复提供了坚实的水量基础。     

Development of an index based on fish,macroinvertebrates, phytoplankton,and physicochemical properties to assess urban aquatic ecosystems in Jinan,China

Because of the rapid growth in urbanization over recent decades, urban aquatic ecosystems have been subjected to unprecedented threats and challenges. In this study, we visited 48 sites, of which 14 were reservoir sites, in water bodies in Jinan, China, on six occasions in May, August, and October of 2014 and 2015. We sampled fish, macroinvertebrates, and phytoplankton assemblages and physicochemical factors at each site. We used the richness and diversity of fish, macroinvertebrates, and phytoplankton to evaluate the condition of the aquatic ecosystems of the river sites. We also evaluated the water quality of the reservoir sites using the physicochemical factors of the State Environmental Protection Administration of China. We classified the results into five levels—excellent, good, moderate, poor, and bad—with the comprehensive evaluation index (CEI). More than 40% of the sampling sites were in either poor or bad condition. Nearly half of the excellent or good sites were in the south of Jinan. The CEI was significantly different between the reference and impaired sites; it was significantly and positively correlated with the qualitative habitat evaluation index and was significantly and negatively correlated with conductivity, total alkalinity, and ammonia nitrogen.