Impregnation of silk sericin into polyester fibers using supercritical carbon dioxide

Silk sericin was impregnated into polyester fabric using supercritical carbon dioxide (SCCO₂) to overcome polyester hydrophobicity. The effects of sericin molecular weight, pH of sericin, solution and cosolvent types on sericin impregnation were investigated. Enzyme‐hydrolyzed, acid‐, based‐hydrolyzed sericin in SCCO₂, and a 30 kDa sericin in SCCO₂ modified with cosolvents such as water, methanol, 1‐propanol, and acetone; and a modifier: sodium hydroxide solution were used in this work. Impregnation of sericin in polyester was indicated by Fourier transform infrared spectrophotometry (FTIR) and dyeing with acid dye. Degradation of polyester fibers during SCCO₂ process was indicated by scanning electron microscopy (SEM). Methylene blue dyeing was used to realize carboxyl group in polyester. The results showed no impregnation of sericin into polyester by using SCCO₂ modified with cosolvents. However, sericin was impregnated into modified surface polyester since hydrophilic groups such as carboxyl and hydroxyl groups were regenerated by alkaline hydrolysis. Samples impregnated with hydrolyzed sericin showed high color strength of Supranolechtbordeaux B acid dye. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Crosslinked acrylic pressure sensitive adhesives. 3. Effect of adherend on film formation

The reaction of isocyanate in pressure sensitive adhesive (PSA) films adhered on to various adherends having different surface tensions was monitored by depth profiling using attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy.In the latter stages of crosslinking reaction, unreacted isocyanate and its derivatives exist more in the bulk of the PSA than in the interfaces between PSA and adherends which are Teflon sheet and PE film having relatively lower surface tensions. In the case of using stainless steel having relatively higher surface tension as adherend, opposite segregation was observed compared to Teflon and PE.From X-ray photoelectron spectroscopy (XPS), it was revealed that N atoms exist more in surface than in bulk when stainless steel is used as adherend. We conclude that polyisocyanates migrate in the PSA film in order to minimize the magnitude of interfacial free energy between the PSA and the adherend, which leads to the change of surface tension of PSA film.     

Data Center as a Key Player of a District Electric Power and Heat Network System： A Comparison in Urban and Suburb Regions

A DC （data center） demands air-conditioning power as large as the 1/3-1/2 of total electricity consumption. Thus, energy saving of cooling power of DC yields considerable effect on both economic and environmental views. PV （Photovoltaic） and absorption refrigerator with CGS （cogeneration systems） or gas boiler are possible power saving options. The waste warm air from DC would be utilized for greenhouse heating when DC and greenhouse locate near in the suburbs. In this study, the authors develop an energy network model to assess the potential contribution of DC as a major electric power and chilled air consumer as well as the warm air supplier in a district to the energy efficiency improvement. The evaporation heat of LNG （liquefied natural gas） utilization is also considered as well as PV, CGS. This model is applied to the cases of the urban area in Tokyo which involves athletic center, shops and hospital and the suburbs including greenhouse and then compared.     

Enhancing integrated earthquake simulation with high performance computing

Integrated earthquake simulation (IES) is a seamless simulation of the three earthquake processes, namely, the earthquake hazard process, the earthquake disaster process and the anti-disaster action process. High performance computing (HPC) is essential if IES, or particularly, the simulation of the earthquake disaster process is applied to an urban area in which 10^4∼6 structures are located. IES is enhanced with parallel computation, and its performance is examined, so that virtual earthquake disaster simulation will be made for a model of an actual city by inputting observed strong ground motion. It is shown that parallel IES has fairly good scalability even when advanced non-linear seismic structure analysis is used.     

Study of Superconducting Fault Current Limiter Using Vacuum Interrupter Driven by Electromagnetic Repulsion Force for Commutating Switch

Using a high-temperature superconductor, we constructed and tested a model superconducting fault current limiter (SFCL). The superconductor and the vacuum interrupter as the commutation switch were connected in parallel using a bypass coil. When the fault current flows in this equipment, the superconductor is quenched and the current is transferred to the parallel coil because of the voltage drop in the superconductor. This large current in the parallel coil actuates the magnetic repulsion mechanism of the vacuum interrupter. Due to the opening of the vacuum interrupter, the current in the superconductor is broken. By using this equipment, the current flow time in the superconductor can be easily minimized. On the other hand, the fault current is also easily limited by large reactance of the parallel coil     

State-space forms for higher-order discrete-time models

This paper presents a fundamental study of the connection between continuous- and discrete-time systems. Provided is a definition for discrete-time models, that is discrete-time systems with a continuous-time counterpart, whose order can be higher than that of the continuous-time system. This definition is based on a comparison in a certain sense on the time responses of continuous- and discrete-time systems. A theorem is presented for relating the higher-order discrete-time models to their continuous-time counterparts, which is an extension of a previous theorem for models with order equal to that of the continuous-time system. State-space forms are derived for models obtained through the use of a certain class of hold elements and through the use of mapping models, and these discrete-time systems are shown to be valid according to the definition. Special cases are models obtained using first-order and slewer hold devices, whose convergence to a continuous-time counterpart has not been shown mathematically before, and mapping models corresponding to two-step linear multi-step methods, which have not previously presented in the state-space form. The derived state-space forms provide a convenient way to implement these models for purposes of analysis, design, and implementation of discrete-time systems and finds applications in such areas as digital signal processing, digital simulation, and digital control.     

Force control of twisted and coiled polymer actuators via active control of electrical heating and forced convective liquid cooling

For decades, numerous artificial muscles have been proposed in order to implement beneficial features of biological muscles into robotics. Unfortunately, traditional artificial muscles experienced difficulties in imitating properties of the biological muscles due to mechanical and control issues. Recently, twisted and coiled polymer actuators (TCP) have been shown to produce large mechanical power via thermal stimulations and strong linearity. In this paper, a high-performance TCP thermally cycled by electrical heating and forced convective liquid cooling is designed and associated control algorithms are presented. We elaborate the model of the TCP that is simple, yet provides insight into how the electrical heating and the forced convective liquid cooling contribute to the TCP actuation. The proposed model is verified by experimental studies. Based on the proposed model, we design a feedforward–feedback controller and switching laws, which actively control the TCP in both the heating and cooling cycles. Furthermore, we extend our control methodology to agonist–antagonist TCPs. From the experimental studies, the proposed method is shown to be effective in both single TCP and antagonistic TCPs.