Effects of free stream turbulence on a turbulent boundary layer on a flat plate with zero pressure gradient part IV: Calculation of the flow field

The effects of free stream turbulence on a turbulent boundary layer were calculated by using a k-ϵ two-equation model. The calculations were performed with respect to velocity profiles on a flat plate, wall shear stress, turbulence energy, integral length scales of turbulence, and decay of free stream turbulence, and the results were compared with the experimental results. The energy of the free stream turbulence and the dissipation values at the leading edge of the flat plate were used as the initial calculation conditions. These initial values of dissipation were determined from the integral length scales of the free stream turbulence at the leading edge. The calculated wall shear stress increased with the free stream turbulence and integral length scales of turbulence. The velocity profiles and turbulence energy agreed well with the experimental results, and the effects of free stream turbulence on the wall shear stress agreed fairly well with those observed in experiments. © 1997 Scripta Technica. Inc. Heat Trans Jpn Res. 25 (2): 65–75, 1996     

Development of Fluorogenic Probes for Rapid High-Contrast Imaging of Transient Nuclear Localization of Sirtuin 3

Protein labeling using fluorogenic probes enables the facile visualization of proteins of interest. Herein, we report new fluorogenic probes consisting of a rationally designed coumarin ligand for the live-cell fluorogenic labeling of the photoactive yellow protein (PYP)-tag. On the basis of the photochemical mechanisms of coumarin and the probe–tag interactions, we introduced a hydroxy group into an environment-sensitive coumarin ligand to modulate its spectroscopic properties and increase the labeling reaction rate. The resulting probe had a higher labeling reaction rate constant and a greater fluorescence OFF–ON ratio than any previously developed PYP-tag labeling probe. The probe enabled the fluorogenic labeling of intracellular proteins within minutes. Furthermore, we used our probe to investigate the localization of sirtuin 3 (SIRT3), a mitochondrial deacetylase. Although the nuclear localization of SIRT3 has been controversial, this transient nuclear localization was clearly captured by the rapid, high-contrast imaging enabled by our probe.     

Effect of CeO2 and La2O3 on the Activity of CeO2−La2O3/Al2O3-Supported Pd Catalysts for Steam Reforming of Methane

The effect of the addition of CeO₂ or La₂O₃ on the surface properties and catalytic behaviors of Al₂O₃-supported Pd catalysts was studied in the steam reforming of methane. The FTIR spectroscopy of adsorbed CO and the Pd dispersion suggest the partial coverage of Pd⁰ by ceria or lanthana species. This could lead to the formation of an adduct MPd _x O (M = Ce or La) at the surface of the metal crystallites. The addition of ceria or lanthana resulted in an increase of the turnover rate and specific rate for steam reforming of methane. One possible explanation if that the Pd⁰*Pd^δ+O–M interfacial species (M = Ce or La) are oxidized by H₂O or CO₂, promoting the O* transfer to the metal surface. This could facilitate the removal of C* species from the metal surface, resulting in the increase of specific reaction rate and increase of the accessibility of CH₄ to metal active sites.     

Attractants for Rice Leaf Bug, <Emphasis Type="BoldItalic">Trigonotylus caelestialium</Emphasis> (Kirkaldy), are Emitted from Flowering Rice Panicles

Volatiles were extracted from rice plants of various growth stages with solid-phase microextraction (SPME) and analyzed by gas chromatography-mass spectrometry (GC-MS) to identify attractants that cause invasion of the rice leaf bug Trigonotylus caelestialium (Kirkaldy) into paddy fields. The composition of volatile blends produced by rice plants changed with rice development. In addition, volatile blend compositions differed between the panicles and the stems and leaves. The relative geranyl acetone content was high in all plant structures analyzed. In volatiles from whole plants in the fourth-leaf stage and panicles in the full-ripe stage, the relative content of green leaf volatiles (GLVs) was higher than that found in other rice plant structures. In contrast, relative terpene levels emitted from whole plants in the panicle-formation stage and by panicles and stems and leaves in the flowering stage were higher than those of other rice plant structures. However, the type of terpenes found differed between the panicles and the stems and leaves. Relative levels of β-caryophyllene in whole plants in the panicle-formation stage and panicles in the flowering stage were much higher than that in stems and leaves in the flowering stage. Our previous studies demonstrated that the odor from whole plants in the panicle-formation stage and panicles in the flowering stage is attractive to rice leaf bugs. Here, the attractiveness of β-caryophyllene to adult bugs was investigated in olfactometer assays. Adult females were attracted to β-caryophyllene at a concentration of 0.001%, which is approximately equivalent to the concentration produced by flowering rice panicles. However, β-caryophyllene also was present in the odor of whole plants in the fourth-leaf stage and in stems and leaves in the flowering stage. Furthermore, the amounts of this compound emitted from these structures were similar. Therefore, we suggest that the relative abundance of this compound in a volatile blend is important for attractance of the bugs.     

Frequency stabilization of GaAlAs laser using a Doppler-free spectrum of the Cs-D2line

Experimental results are shown on the frequency stabilization of a GaAlAs laser using a Doppler-free spectrum in the saturated absorption of the Cs-D2line at 852.1 nm. The frequency stability (Allan variance) between3.0 times 10^{-12}and1.0 times 10^{11}was obtained at the averaging time between 0.1 and 1000 s.     

The effectiveness of thermal treatment for development of conductive metalized aramid fiber using supercritical fluid carbon dioxide—Fiber-metal adhesive strength improvement

The effect of thermal treatment to improve the metal adhesion into poly-(p-phenylene terephthalamide) (PPTA), e.g. aramid fiber, has been investigated. After palladium(II)-hexafluoroacetylacetonate metal complex, Pd(hfac)₂, seeding into the fiber using supercritical fluid carbon dioxide, scCO₂, a post-thermal treatment was conducted. As a result, after carrying out electroless copper plating, the adhesive strength between polymer substrate and copper layer greatly increased. Also, in order to have a better comprehension on decomposition reactions of Pd(hfac)₂ under supercritical conditions, remains of metal complex were analyzed using electron ionization mass spectrometry technique (EI-MS). EI-MS mass spectra derived from Pd(hfac)₂ gave us useful information about its dissociation reactions and reaction temperature under supercritical conditions. Additionally, to verify the Pd particles seeding in the fiber surface, X-ray photoelectron spectrometry (XPS) analyses were performed. The results confirmed that post-thermal treatment induced Pd particles diffusion and deeper penetration of Pd complex and its fragments into the fiber.     

Hydrogen production from methane steam reforming: parametric and gradient based optimization of a Pd-based membrane reactor

In this work three mathematical models for methane steam reforming in membrane reactors were developed. The first one is a steady state, non isothermal, non isobaric and one dimensional model derived from material and energy balances and validated using experimental data from the literature. It is referred as full model. The influence of two different intrinsic kinetics available, as well as, the influence of five important parameters on methane conversion (X_CH4_{\mathrm{CH}_{4}}) and hydrogen recovery (Y_H2_{\mathrm{H}_{2}}) were parametrically evaluated through simulations. The second model, referred as meta-model, was obtained though the response surface technique. This meta-model was included into a constrained optimization problem solved using NPSOL. The third model, referred as a simplified model, takes into account only mass balances from the full model. Using this model, a gradient based method (DIRCOL) was used to perform the optimization of the sum of methane conversion and hydrogen recovery. High methane conversions and hydrogen recoveries were reached through these methodologies.