地震数据采集系统中频谱均衡滤波器的理论设计

地层的高频吸收衰减效应是导致地震勘探分辨率不高的主要原因，在高分辨率野外地震数据系统中，频谱均衡滤波器所设置的重要部件。文章以频谱均衡滤波器的原理和地层吸收衰减特性为基础，用计算机模拟的方法研究地层吸收衰减使分辨率降低的程度和频谱均衡滤波器对分辨率的补偿效果，给出了较好的频谱均衡滤波器的设计方案。     

激光热源形成过程的定量描述

研究了热传导方程的通解，进而提出激光热源形成的微观机理和热源形成过程的三个理论计算式。对激光热效应的应用具有指导意义。     

The TDCPR Management Mode of Engineering Equipment

The Three Gorges Project is a very large project,and its structure is very complex.Interna-tional advanced engineering equipment is broadly used.The state of equipment running directly influ-ences project building qualities and limited time.According to the factud conditions of the Three Gor-ges Project,the characteristics of engineering equipment are analyzed.At the same time ,some theories about equipment management are induced ,and the TDCPR management mode of engineering equip-ment of the Three Gorges Project is put forwared in order to gain the aim of managing and using equip-ment well and speeding up the project construction.     

Viterbi译码器的硬件实现

介绍了一种Vkerbi译码器的硬件实现方法。设计的基于硬判决的Viterbi译码器具有约束长度长（9)、译码深度深（64)的特点。为了兼顾硬件资源与电路性能两个方面，在设计中使用了4个ACS单元，并根据Xilinx Virtex系列FPGA的结构特点．利用FPGA内部的BlockRAM保存汉明距离和幸存路径，提高了译码速度。     

抗氧剂于有机PTC热敏导电材料性能的稳定作用研究

探讨了抗氧剂在聚乙烯 乙烯 醋酸乙烯酯共聚物 炭黑 (PE EVA CB)体系中的作用。结果表明 ,在体系中加入抗氧剂可以提高材料体系的结构稳定性 ,从而可以在一定程度上改善材料的热电稳定性。当在体系中加入 2 .0 %(w)的抗氧剂时可收到良好效果。     

包气带中不同示踪源层条件下核素迁移对比试验

为研究不同示踪源层材料对水份运移和核素迁移的影响，开展了以石英砂和黄土分别为示踪源层载体时Sr、Nd、Ce在包气带中迁移的对比试验。试验历时470d，在两种源层条件下各取土芯样4次。试验结果表明：在喷淋强度为5mm/h、3h/d条件下，Nd和Ce无论在石英砂示踪源层还是黄土示踪源层中浓度峰位均没有明显向下迁移；对于Sr，在黄土示踪源层中，470d后其峰位向下迁移约15cm(按质心计算为10cm左右)，而从石英砂示踪源层中向下迁移不明显（按质心计算，迁移约2.7cm），只是峰位有些展宽。上述结果表明，极薄（7mm）的细石英砂层也能对非饱和入渗水产生明显屏流作用，使得核素从石英砂示踪源层中向下迁移速度减慢。     

西北地区节水灌溉市场与技术需求

西部开发需要大量的生态用水，从节水灌溉设备市场分析，节水灌溉专用泵阀、新型输水管材、高效低能喷微灌设备及材料的需求量很大，技术需求与亟待研究开发的关键技术和设备也很多。从西北地区水资源状况与需求看，节水灌溉市场有很大潜力。     

高可靠镀Ni／Au工艺及其在微波PTFE电路上的应用

介绍了高可靠电镀Ｎｉ／Ａｕ工艺在ＰＴＦＥ微波印制电路上的应用，并分析了氨基磺酸盐镀软镍和亚硫酸盐镀软金工艺的影响因素及提高Ｎｉ／Ａｕ镀层之间附着力的措施。通过实验及应用证明了与直接镀金工艺相比，在软基材ＰＴＦＥ敷铜箔板上镀Ｎｉ／Ａｕ工艺能大大提高微波电路的可焊性，高温稳定性和长期可靠性，并且用其所制作的微波器件的高频性能也优于直接镀金工业。     

X波段及DBS接收用PHEMT单片低噪声放大器

报道了X波段及DBS接收用单片低噪声放大器的研制结果。利用CAD软件对单片电路进行优化设计，设计工作包括MBE材料、PHEMT器件和单片电路三部分。在研制过程中，开展了关键工艺的专题研究。研究结果为：单级单片放大器在10：5－11．6GHz范围内，NF≤1．82dB，G≥7.72dB；在11．7－12．2GHz范围内，NF≤1．80dB，G≥6．8dB；双级放大器在10．4－11．1GHz范围内，NF≤1．96dB，G≥15．3dB，最低噪声系数为1．63dB，最高增益为16．07dB。     

On Deciding Readiness and Failure Equivalences for Processes

In this paper, we study the complexity of deciding readiness and failure equivalences for finite state processes and recursively defined processes specified by normed context-free grammars (CFGs) in Greibach normal form (GNF). The results are as follows: (1) Readiness and failure equivalences for processes specified by normed GNF CFGs are both undecidable. For this class of processes, the regularity problem with respect to failure or readiness equivalence is also undecidable. Moreover, all these undecidability results hold even for locally unary processes. In the unary case, these problems become decidable. In fact, they are Π^p₂-complete, We also show that with respect to bisimulation equivalence, the regularity for processes specified by normed GNF CFGs is NL-complete. (2) Readiness and failure equivalences for finite state processes are PSPACE-complete. This holds even for locally unary finite state processes. These two equivalences are co-NP-complete for unary finite state processes. Further, for acyclic finite state processes, readiness and failure equivalences are co-NP-complete and they are NL-complete in the unary case. (3) For finite tree processes, we show that finite trace, readiness, and failure equivalences are all L-complete. Further, the results remain true for the unary case. Our results provide a complete characterization of the computational complexity of deciding readiness and failure equivalences for several important classes of processes.