新型投影机高效光源——LED

该文详细介绍了LED作为微型投影机高效投影光源的优势和存在的不足之处,分析了LED作为投影光源需要改进的地方,指出了LED最终会成为未来投影机光源的主流趋势。     

Low-power C-R hybrid D/A conversion network for SAR A/D converter

An energy-efficient D/A conversion structure combined with a splited unit-capacitor array and an intermittent-sleeping resistor string is presented for low power SAR A/D converter. The energy dissipation and the matching requirement of the D/A conversion network are researched based on Matlab modeling. And its superiority and applicability are proven by the realization of an 8-bit 200kS/s 25.6 μW 65 nm CMOS SAR A/D converter with this proposed D/A structure.     

Signal processing in random access

In this paper, a cross-layer view for roles of signal processing in random access network and vice versa is presented. The two cases where cross-layer design has a quantifiable impact on system performance are discussed. The first case is a small network (such as wireless LAN) where a few nodes with bursty arrivals communicate with an access point. The design objective is to achieve the highest throughput among users with variable rate and delay constraints. The impact of PHY layer design on MAC protocol is examined and illustrates a tradeoff between allocating resources to the PHY layer and to MAC layer. The second case, in contrast, deals with large-scale sensor networks where each node carries little information but is severely constrained by its computation and communication complexity and most importantly, battery power. This paper emphasizes that the design of signal processing algorithms must take into account the role of MAC and the nature of random arrivals and bursty transmissions.     

A 1-THz superconducting hot-electron-bolometer receiver for astronomical observations

In this paper, we describe a superconducting hot-electron-bolometer mixer receiver developed to operate in atmospheric windows between 800-1300 GHz. The receiver uses a waveguide mixer element made of 3-4-nm-thick NbN film deposited over crystalline quartz. This mixer yields double-sideband receiver noise temperatures of 1000 K at around 1.0 THz, and 1600 K at 1.26 THz, at an IF of 3.0 GHz. The receiver was successfully tested in the laboratory using a gas cell as a spectral line test source. It is now in use on the Smithsonian Astrophysical Observatory terahertz test telescope in northern Chile.     

A Simple Method for the Growth of Very Smooth and Ultra-Thin GaSb Films on GaAs (111) Substrate by MOCVD

We present a simple thermal treatment with the antimony source for the metal–organic chemical vapor deposition of thin GaSb films on GaAs (111) substrates for the first time. The properties of the as-grown GaSb films are systematically analyzed by scanning electron microscopy, atomic force microscopy, x-ray diffraction, photo-luminescence (PL) and Hall measurement. It is found that the as-grown GaSb films by the proposed method can be as thin as 35 nm and have a very smooth surface with the root mean square roughness as small as 0.777 nm. Meanwhile, the grown GaSb films also have high crystalline quality, of which the full width at half maximum of the rocking-curve is as small as 218 arcsec. Moreover, the good optical quality of the GaSb films has been demonstrated by the low-temperature PL. This work provides a simple and feasible buffer-free strategy for the growth of high-quality GaSb films directly on GaAs substrates and the strategy may also be applicable to the growth on other substrates and the hetero-growth of other materials.     

Reinforced Wool Keratin Fibers via Dithiol Chain Re-bonding

Regenerated wool keratin fibers (RWKFs) have heretofore attracted tremendous interest according to environmental friendliness, ample resource, and intrinsic biocompatibility for broad applications. In this realm, both uncontrollable keratin fibril assembly procedure and resultant insufficient mechanical strength, have greatly hindered their large-scale manufacture and commercial viability. Herein, a continuous wet-spinning strategy is put forward to rebuild wool keratin into compact regenerated bio-fibers with improved strength via disulfide re-bonding. Dithiothreitol (DTT) has been introduced to renovate disulfide linkage inside keratin polypeptide chains, and bridge keratin fibrils via covalent thiol bonding to form a continuous backbone as mechanical support. A thus-derived RWKF manifests a tensile strength of 186.1 ± 7.0 MPa and Young's modulus of 7.4 ± 0.2 GPa, which exceeds those of natural wool, feathers, and regenerated wool or feather keratin fibers. The detailed wet-spinning technical parameters, such as coagulation, oxidation, and post-treatment, have been systematically optimized to guarantee the continuous preparation of high-strength regenerated keratin fibers. This work offers insight into solving the concurrent challenges for continuous manufacture of regenerated protein fibers and sustainability concerns about biomass waste.     

Ferroelectric Properties and Applications of Hybrid Organic-Inorganic Perovskites

Hybrid organic-inorganic perovskites (e.g. CH3NH3PbI3) have attracted tremendous attention due to their promise for achieving next-generation cost-effective and high performance optoelectronic devices. These hybrid organic-inorganic perovskites possess excellent optical and electronic properties, including strong light absorption, high carrier abilities, optimized charge diffusion lengths, and reduced charge recombination etc., leading to their widespread applications in advanced solar energy technologies (e.g. high efficiency perovskite solar cells). However, there is still a lack of investigations regarding fundamental properties such as ferroelectricity in these perovskites. As conventional ferroelectric ceramics are prepared at high temperature and have no mechanically flexibility, low-temperature proceed and flexible perovskite ferroelectrics have become promising candidates and should be exploited for future flexible ferroelectric applications. Here, ferroelectric properties in hybrid organic-inorganic perovskites and several state-of-the-art perovskite ferroelectrics are reviewed. Novel ferroelectric applications of hybrid organic-inorganic perovskites are discussed as well, providing guideline for realizing future high performance and flexible ferroelectric devices.     

基于Zigbee无线传感器网络的智能灯光跟随系统

设计一个基于Zigbee的智能灯光跟随系统。系统中连接有人体红外热释电传感器的Zigbee结点等距离分布在走廊或道路的旁边,检测特定区域人员是否存在的信息,并将信息传于协调器节点,协调器节点连接主控制器PX-A270,PXA270根据采集的信息控制舵机的转向和照明装置的亮与灭,实现有人走动存在时,灯光随着人的转移而转移,无人时照明系统自动熄灭,从而实现节约能源的效果。     

A HYBRID DYNAMIC PROGRAM SLICING

This letter proposes a hybrid method for computing dynamic program slicing. The key element is to construct a Coverage-Testing-based Dynamic Dependence Graph (CTDDG),which makes use of both dynamic and static information to get execution status. The approach overcomes the limitations of previous dynamic slicing methods, which have to redo slicing if slice criterion changes.     

Endo/Lysosome‐Escapable Delivery Depot for Improving BBB Transcytosis and Neuron Targeted Therapy of Alzheimer's Disease

The effective treatment of Alzheimer's disease (AD) is hindered due to the hard blood–brain barrier (BBB) penetration and non‐selective distribution of drugs in the brain. Moreover, the complicated pathological mechanism of AD involves various pathway dysfunctions that limit the effectiveness of a single therapeutic drug. Herein, a dendrigraft poly‐l ‐lysines (DGL)‐based siRNA and D peptide (Dp) loaded nanoparticle is designed that could target and penetrate through the BBB, enter the brain parenchyma, and further accumulate at the AD lesion. In this system, T7 peptide, which specifically targets transferrin receptors on the BBB, is linked to DGL via acid‐cleavable long polyethylene glycol (PEG) to achieve high internalization, quick escape from endo/lysosome, and effective transcytosis. Then, the Tet1, which specifically targets diseased neurons, is modified onto DGL by short PEG. After being exposed, Tet1 could drive the nanoparticles to the AD lesion and release the drugs. As a result, the production of β amyloid plaques (Aβ) is inhibited. Neurotoxicity induced by Aβ plaques and tau proten phosphorylation (p‐tau) tangle is also alleviated, and the cognition of AD mice is significantly improved. Overall, this system programmatically targets BBB and neurons, thus, significantly enhances the intracephalic drug accumulation and AD treatment efficacy.