Selective determination of urea using urease immobilized on ZnO nanowires

Well-aligned zinc oxide (ZnO) nanowire arrays were fabricated on gold-coated plastic substrates using a low-temperature aqueous chemical growth (ACG) method. The ZnO nanowire arrays with 50–130 nm diameters and ∼1 μm in lengths were used in an enzyme-based urea sensor through immobilization of the enzyme urease that was found to be sensitive to urea concentrations from 0.1 mM to 100 mM. Two linear sensitivity regions were observed when the electrochemical responses (EMF) of the sensors were plotted vs. the logarithmic concentration range of urea from 0.1 mM to 100 mM. The proposed sensor showed a sensitivity of 52.8 mV/decade for 0.1–40 mM urea and a fast response time less than 4 s was achieved with good selectivity, reproducibility and negligible response to common interferents such as ascorbic acid and uric acid, glucose, K⁺ and Na⁺ ions.     

Senti‐CS: Building a lexical resource for sentiment analysis using subjective feature selection and normalized Chi‐Square‐based feature weight generation

Sentiment analysis involves the detection of sentiment content of text using natural language processing. Natural language processing is a very challenging task due to syntactic ambiguities, named entity recognition, use of slangs, jargons, sarcasm, abbreviations and contextual sensitivity. Sentiment analysis can be performed using supervised as well as unsupervised approaches. As the amount of data grows, unsupervised approaches become vital as they cut down on the learning time and the requirements for availability of a labelled dataset. Sentiment lexicons provide an easy application of unsupervised algorithms for text classification. SentiWordNet is a lexical resource widely employed by many researchers for sentiment analysis and polarity classification. However, the reported performance levels need improvement. The proposed research is focused on raising the performance of SentiWordNet3.0 by using it as a labelled corpus to build another sentiment lexicon, named Senti‐CS. The part of speech information, usage based ranks and sentiment scores are used to calculate Chi‐Square‐based feature weight for each unique subjective term/part‐of‐speech pair extracted from SentiWordNet3.0. This weight is then normalized in a range of ?1 to +1 using min–max normalization. Senti‐CS based sentiment analysis framework is presented and applied on a large dataset of 50000 movie reviews. These results are then compared with baseline SentiWordNet, Mutual Information and Information Gain techniques. State of the art comparison is performed for the Cornell movie review dataset. The analyses of results indicate that the proposed approach outperforms state‐of‐the‐art classifiers.     

Computer Vision Techniques Applied for Diagnostic Analysis of Retinal OCT Images: A Review

The retina is a tiny layer at the posterior pole of an eye and is made up of tissues sensitive to light, these tissues generate nerve signals that pass through the optic nerve to the brain. A retinal disorder occurs when the retina malfunctions; glaucoma, diabetic retinopathy and pathologic myopia are retinal disorders and principal causes of blindness worldwide. These retinal disorders are often diagnosed and treated by an ophthalmologist. However, to accurately assess a retinal disease, ophthalmologist would need qualitative and quantitative analysis of the disease, it’s early and current statistics, but acquisition of these measurements are not possible through manual techniques, there should be automated computer aided diagnosis (CAD) systems to assist ophthalmologists. In this comprehensive review, an analysis and evaluation has been performed of different computer vision and image processing approaches applied to OCT images for automatic diagnosis of retinal disorders. We also reported disease causes, symptoms and pathologies manifestations within OCT images, which can serve as baseline knowledge for development of an automated CAD system. Hence, this disease specific review offers a good understanding to analyze visual impairments from retinal OCT images which will help researcher to design enhanced therapeutic systems for retinal disorders.     

Brain tumor classification from multi-modality MRI using wavelets and machine learning

In this paper, we propose a brain tumor segmentation and classification method for multi-modality magnetic resonance imaging scans. The data from multi-modal brain tumor segmentation challenge (MICCAI BraTS 2013) are utilized which are co-registered and skull-stripped, and the histogram matching is performed with a reference volume of high contrast. From the preprocessed images, the following features are then extracted: intensity, intensity differences, local neighborhood and wavelet texture. The integrated features are subsequently provided to the random forest classifier to predict five classes: background, necrosis, edema, enhancing tumor and non-enhancing tumor, and then these class labels are used to hierarchically compute three different regions (complete tumor, active tumor and enhancing tumor). We performed a leave-one-out cross-validation and achieved 88% Dice overlap for the complete tumor region, 75% for the core tumor region and 95% for enhancing tumor region, which is higher than the Dice overlap reported from MICCAI BraTS challenge.     

Route Maintenance in IEEE 802.11 wireless mesh networks

In this paper, we propose a novel Route Maintenance scheme for IEEE 802.11 wireless mesh networks. Despite lack of mobility and energy constraints, reactive routing protocols such as AODV and DSR suffer from frequent route breakages in 802.11 based infrastructure wireless mesh networks. In these networks, if any intermediate node fails to successfully transmit a packet to the next hop node after a certain number of retransmissions, the link layer reports a transmission problem to the network layer. Reactive routing protocols systematically consider this as a link breakage (and therefore a route breakage). Transmission failures can be caused by a number of factors e.g. interference or noise and can be transient in nature. Frequent route breakages result in significant performance degradation. The proposed mechanism considers multiple factors to differentiate between links with transient transmission problems from those links which have permanent transmission problems and takes a coherent decision on link breakage. The proposed mechanism is implemented in AODV for single-radio single-channel mesh network and an extension is incorporated in multi-radio multi-channel scenarios. Simulation results show substantial performance improvement compared to classical AODV and local route repair schemes.     

Fabrication and characterization of copper-diamond particles

The electroless copper deposition on both pure and Cr-coated diamond particles was studied to produce copper/diamond composites for electronic packaging materials. The particles were characterized and the mechanism of product formation was investigated through scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), X-ray diffraction (XRD), and X-ray photoelectron spectra (XPS). The particle coating thickness was measured using optical micrographs. The diamond particles got uniform coating thickness of copper crystals layers. This method provided an excellent base for the fabrication of metal-based composites using cheap equipments, and was less time consuming, nature friendly and economical compared with other methods of diamond surface metallization.     

Diversity improvement estimation from rain Radar databases using maximum likelihood estimation

This research examines route diversity as a fade mitigation technique in the presence of rain, for terrestrial microwave links. The improvement in availability due to diversity depends upon the complex spatio-temporal properties of rainfall. To produce a general model to predict the advantage due to route diversity it is necessary to be able to predict the correlation of rain attenuation on arbitrary pairs of microwave links. This is achieved by examination of a database of radar derived rain rate fields. Given a representative sample of rain field images, the joint rain attenuation statistics of arbitrary configurations of terrestrial links can be estimated. Existing rain field databases often yield very small numbers of high joint attenuation events. Consequently, estimates of the probability of joint high attenuation events derived from ratios of the number of occurrences can be highly inaccurate. This paper assumes that pairs of terrestrial microwave links have joint rain attenuation distributions that are bi-lognormally distributed. Four of the five distribution parameters can be estimated from ITU-R models. A maximum likelihood estimation (MLE) method is used to estimate the fifth parameter, i.e., the covariance or correlation. The predicted diversity statistics vary smoothly and yield plausible extrapolations into low probability situations.     

Comparative Analysis of Ti,Ni,and Au Electrodes on Characteristics of TiO2 Nanofibers for Humidity Sensor Application

The effect of metal（Ti,Ni,and Au） electrodes on humidity sensing properties of electrospun TiO₂ nanofibers was investigated in this work.The devices were fabricated by evaporating metal contacts on SiO₂ layer thermally grown on silicon substrate.The separation between the electrodes was 90μm for all sensors.The sensors were tested from 40%to 90%relative humidity（RH） by AC electrical characterization at room temperature. When sensors are switched between 40%and 90%RH,the corresponding response and recovery time are 3 s and 5 s for Ti-electrode sensor,4 s and 7 s for Ni-electrode sensor,and 7 s and 13 s for Au-electrode sensor.The hysteresis was 3%,5%and 15%for Ti-,Ni-,and Au-electrode sensor,respectively.The sensitivity of Ti,Ni,and Au-electrode sensors are 7.53 MΩ/%RH,5.29 MΩ/%RH and 4.01 MΩ/%RH respectively at 100 Hz.Therefore Ti-electrode sensor is found to have linear response,fast response and recovery time and higher sensitivity as compared with those of Ni- and Au-electrode sensors.Comparison of humidity sensing properties of sensors with different electrode material may propose a compelling route for designing and optimizing humidity sensors.