透同光路指示光的CO_2激光器

报导封离型可透同光路指示光的ＣＯ２激光器的研制，并给出了其电流—工作特性曲线。对需可见光作同光路指示的ＣＯ２激光应用整机的开发，开辟了一条新的途径。     

原子印章YAG激光雕刻机的研究

本文阐述了原子印章ＹＡＧ脉冲激光雕刻机的工作原理，详细介绍了整机结构特点，以及激光器参数、工艺参数和计算机排版软件功能，并简述了激光进行原子印章雕刻时的作用机理，和激光特性参数、印章材料及计算机软件等因素对印章雕刻效果的相应影响。     

ATM网络中漏桶流量控制特性的研究

本文对ＡＴＭ（异步转移模式）网络中话音、数据和图像业务的漏桶流量控制特性进行了研究。计算机模拟结果表明，由于各种业务内在的相关性不同，相应的漏桶流量控制特性有较大的差异。漏桶参数的选择对于各种业务具有不同的公平性，因而应根据业务的特性来设计漏桶参数。     

关于布尔函数的二次逼近

本文首先利用矩阵形式引入了二阶ｗａｌｓｈ谱的概念并讨论了其性质，其次引入了二次ｂｅｎｔ函数的概念，同时论述了二次ｂｅｎｔ函数的密码学意义。     

3mm波段极近距离雷达

提出一种极近距离雷达概念，并导出其作用距离公式，在此基础上研制出一台３ｍｍ波段极近距离多普勒雷达样机．试验结果表明该雷达结构简单，成本低廉，在作用距离为零点几米至几米范围内可获得较高的定距精度．     

自聚焦棒耦合性能的分析

本文采用光线光学的原理分析了自聚焦棒（ＧＲＩＮ）的光学性能，在折射率分布为抛物线近似的条件下，推导出较为简单的ＧＲＩＮ中的光线轨迹方程，并实验测量了ＧＲＩＮ的耦合效率，从而由理论和实验两方面讨论ＧＲＩＮ的聚焦特性。     

Fracture behaviour of unmodified and rubber-modified epoxies under hydrostatic pressure

The fracture toughness and uniaxial tensile yield strengths of unmodified and CTBN-rubber-modified epoxies were measured under hydrostatic pressure. The purpose of these experiments was to learn how suppressing cavitation in rubber particles affects the deformation mechanisms and the fracture toughness of rubber-modified epoxy. It was found that the cavitation of CTBN-rubber could be suppressed at a relatively low pressure (between 30 and 38 M Pa). With cavitation suppressed, the rubber particles are unable to induce massive shearyielding in the epoxy matrix, and the fracture toughness of the rubber-modified epoxy is no higher than that of the unmodified epoxy in the pressure range studied. Unmodified epoxy shows a brittle-to-ductile transition in fracture toughness test. The reason for this transition is the postponement of the cracking process by applied pressure.Work performed while on a sabbatical leave at the University of Michigan.     

Finite element micromechanical modelling of unidirectional fibre-reinforced metal-matrix composites

Typical finite element formulations and models for unidirectional composite materials are reviewed. The application of micromechanical finite element analysis to the modelling of unidirectional fibre-reinforced metal-matrix composites is demonstrated by presenting some studies from recent publications. It is shown that while analytical models offer a simple tool for obtaining the overall response of composites, finite element analysis provides more accurate and detailed characterisation of composite properties for complicated geometries and constituent property variations. Various effects that influence the stress/strain response and fibre/matrix deformation of composites are studied through modelling. These effects include the fibre coating and reaction layer, fibre shape and distribution, metallurgical and environmental factors, stress distributions and damage. It is demonstrated that the properties and constituent phase interaction of metal-matrix composites are best modelled by finite element analysis. It is emphasized that in order to obtain good predictions, the models must be coupled with first-hand characterisations of the constituent phases and their interactions, including the thermal history of the specimens.     

A finite strip analysis of cracked laminates

As a step towards the construction of a comprehensive model for damaged composites, the deformation of transversely cracked laminates is analysed. The approach is based on a generalised plane strain approach and uses the finite strip method which allows general lay-ups of laminates rather than just cross-ply to be considered. General loading is treated. In addition, the method permits a more flexible control to be exercised between accuracy and the extensiveness of the calculations than can be achieved using existing analyses. This method could be integrated with the finite element analysis of structures to allow for changes in the effective material properties of locally damaged regions. Results produced by the approach are compared with those available in the literature and good agreement is demonstrated.     

高纯锗探测器的快定时性能及其应用

为了将高纯锗（ＨＰＧｅ）探测器用于快定时的物理实验中，本实验研究厂影响高纯锗探测器定时谱仪时间性能的各种因素，找出了获得谱仪最小时间分辨的各种最佳参数。并建立了分辨时间为４．１９ｎｓ，能量分辨率为２０ｋｅＶ，微分非线性好于±２．０％，计效率可承受１２０×１０￣３ｓ￣（－１）的时间微分扰动角关联谱仪。利用此谱仪，以￣（２０４）Ｂｉ为探针核，研究了Ｂｉ系高温超导的微观机理，取得了较好的结果。