大型压力容器现场热处理技术

以大连石化350万t/a催化裂化装置再生器为例,研究开发大型炼油化工设备现场新型热处理工艺。通过设置必要的热气流导向装置,采用微正压内燃工艺,配备新型大功率燃油喷嘴、用DCS集散控制系统调节油风比例和烟囱热量排放张合度,对超厚壁板适当增加电加热辅助热处理,解决了大容积、变截面、不等壁厚、超重设备施工现场热处理温度调整难度大、不均衡等技术问题。实践证明,应用该技术进行热处理,具有工期短、效果好、经济效益明显等特点。     

锰锌铁氧体纳米粉体的液相制备及磁性能

以δ-FeOOH为前驱体,用氨水调节溶液的pH值,分别采用(1)90℃水浴加热动态转化、(2)沸腾回流动态转化,(3)90℃静态转化及(4)200℃水热法四种方法合成了锰锌铁氧体纳米粉体.采用X射线衍射仪(XRD),透射电子显微镜(TEM)、振动样品磁强计(VSM)和X射线荧光光谱仪(XRF)等方法对粉体进行了表征,对四种液相法制备的锰锌铁氧体纳米粉体的结构和性能等进行了对比和分析.结果表明,四种方法中沸腾回流相转化法得到的产物具有磁性能较好、形状较规则、粒径可控等优点.     

我国电力工业和发电技术未来发展趋势

传统工业化走的是通过高消耗追求经济数量增长和先污染后治理的道路。介绍在传统工业化面临严重危机的背景下,可持续发展战略和新型工业化的兴起和特点,充分体现了未来发展的要求。在分析、总结世界能源发展的经验和规律的同时,对未来世界能源发展进行了宏观预测。以科学发展观为指导,采用未来学的方法,结合我国国情、发展现状和近中期发展目标,对本世纪特别是21世纪前20a我国电力工业和发电技术趋势进行了初步探讨,对国家能源安全等问题进行讨论。     

错金工艺及对其运用的探讨

为了继承和发扬错金工艺，从其定义出发，探讨了该工艺在中国古代及国外的发展与应用以及笔者对该工艺的实验研究。针对在错金工艺实践过程中出现的问题，在查阅了相关的资料后，对传统错金工艺的实现方法提出了质疑。     

A new method for the determination of wax precipitation from non-diluted crude oils by fractional precipitation

Wax precipitation is one of the most important flow assurance problems. Unfortunately, experimental data are very scarce to confirm existing models for prediction of such precipitation problem. This work reports a new experimental method. Multistage fractional wax precipitation was carried out by decreasing the temperature of crude oil. No solvent dilution was used, so the effect of solvent on temperature wax precipitation was avoided. The reproducibility of the method was tested with comparable results. The precipitation curve and the wax appearance temperature were obtained for two crude oils with different chemical nature using the reported method.     

Visualization and quantification of the mechanical deformation induced by an electrical field in poly(ethylene naphthalene 2,6‐dicarboxylate) (PEN) films

An optical nondestructive strain measurement technique was performed to analyze the mechanical deformation induced by an electrical field within the insulating materials. Poly(ethylene naphthalene 2,6‐dicarboxylate) (PEN) films were then subjected to constant electrical fields right up to their electrical breakdown. The experimental technique made it possible to follow the various stages of the mechanical behavior of PEN in real time. The final breakdown occurred in the observation zone and the related mechanical deformation was captured. A “margarita” structure was observed with a hole at the center. The experimental results indicated that the level of the induced‐mechanical deformations depended on the local environment. We defined two different zones representing the inside and the outside of the damaged area. The induced‐deformations were larger in the damaged zone. It was also observed that deformations increased when the sample had a lower degree of crystallinity. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Grafting of maleic anhydride onto polyethylene through a green chemistry approach

The grafting of a polymer can lead to the improvement and modification of the polymer and thus expand its applications. Grafting methods include solution grafting in organic solvents, melt grafting at high temperatures, and light grafting with radioactive sources. These methods have their advantages and disadvantages. The disadvantages include waste treatment, consumption of energy, and so on. In this study, a hydrothermal process which is called the green approach, was developed to prepare graft copolymers. The effect of various factors on the grafting degree was investigated in detail. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

土钉加锚杆联合支护基坑的失稳分析及处理

根据具体工程实例,介绍了在基坑开挖时采用土钉加锚杆的联合支护方式后在施工过程中出现坍塌裂缝的现象,针对这一现象,分析了施工条件与环境,得出了事故发生的原因,并结合实际情况提出了处理措施.     

USL和USK系列振动筛防噪技术分析

为了改善筛分机械的使用环境，降低筛分机械的噪声，从噪声源入手，从内因和外因两个方面分析了筛分机噪声的形成原因。论述了USL和USK系列振动筛在降低噪声方面所采取的先进技术措施。