光栅谐振子检测地震波的理论和方法研究

提出了一种新的检波理论和方法 ,它是一种实现检测地震波信号的地震勘探技术。采用光栅谐振子为敏感元件 ,将大地震动的机械信号转换成光调制信号—莫尔条纹 ,再用光电接收器件将其转换成数字化电信号输出。光栅谐振子检测地震波的装置能够直接将大地震动的机械信号转化为脉冲数字信号输出 ;并以记数的形式采样 ,避免了器件的精度不同对传感器输出的数据质量的影响 ,从而简化了组装工艺。文中阐述了该方法的工作原理、参数计算、测试方法和实验结果     

Synthesis of Mg-α-sialon from the mixture of silicon, aluminum and magnesia powders in a flowing nitrogen atmosphere

Synthesis of Mg-α-Sialon has been investigated by the mixture of silicon, aluminum and magnesia powders in a flowing nitrogen atmosphere in the range of 1300–1600 °C, when Mg-α-Sialon is designed with a chemical formulation of Mg _x Si_12−3x Al_3x O _x N_16−x in present work. The results showed that Mg-α-sialon initially occurred at 1400 °C and basically increased with elevated temperatures. For the samples of x = 0.6, 0.8 and 1.0 the products mainly consisted of Mg-α-Sialon with small amounts of Si, AlN and 21R AlN-polytypoid phases at 1600° C. However, in final products of x = 1.2, 1.4 and 1.6 only a little of Mg-α-Sialon formed and a great amount of Si remained in these samples at all the fired temperatures. Fortunately, the content of Mg-α-Sialon in these samples were obviously increased by adding a small amount of α-Si₃N₄ as seeds before nitridation.     

Optimal and self‐tuning fusion Kalman filters for discrete‐time stochastic singular systems

Based on the optimal fusion estimation algorithm weighted by scalars in the linear minimum variance sense, a distributed optimal fusion Kalman filter weighted by scalars is presented for discrete‐time stochastic singular systems with multiple sensors and correlated noises. A cross‐covariance matrix of filtering errors between any two sensors is derived. When the noise statistical information is unknown, a distributed identification approach is presented based on correlation functions and the weighted average method. Further, a distributed self‐tuning fusion filter is given, which includes two stage fusions where the first‐stage fusion is used to identify the noise covariance and the second‐stage fusion is used to obtain the fusion state filter. A simulation verifies the effectiveness of the proposed algorithm. Copyright © 2008 John Wiley & Sons, Ltd.     

我国内螺纹铜管的生产技术与发展方向

本文论述了我国内螺纹铜管业生产、工艺、产品技术条件、齿型及市场现状 ,提出了内螺纹铜管的研发方向。     

利用钨极氩弧焊技术修复1#汽轮机转子的实践

本文主要介绍了我厂利用钨极氩弧焊将1#发电机组汽轮机转子修复的工艺过程.     

深斜井永久式封隔器两种套铣方式风险分析与优化措施

在深斜井大修作业中,为了适应海上修井机作业能力的需要,需要处理井下永久式封隔器。采用磨铣方式处理难度大、周期长、费用高,因此通常采取套铣方式,仅将可钻式永久性封隔器卡瓦及密封套铣掉,再打捞回收或下推至人工井底,直至不妨碍下一步作业。从作业井实际情况出发,针对深斜井永久式封隔器,采用了两种不同动力驱动方式进行套铣处理:一种是地面转盘驱动,井下全部钻具都处于旋转状态,全程摩阻及扭矩大,可以施加较大钻压;另一种为井下马达驱动,即只有马达以下钻具旋转,而马达以上钻具不转,从而降低摩阻,但施加钻压较小,否则容易引起马达失速,所以对马达性能要求较高。通过套铣风险对比分析,分别对两种套铣钻具与参数进行了优化,提出了套铣成功与否的判断依据,为现场应用提供了借鉴。     

被动式氚取样器性能的实验研究

介绍了核设施工作场所和环境空气中氚化水蒸气HTO的监测，被动式氚取样器在国外已经得到非常广泛的应用，所研制的被动式氚取样器，特别适用于7－30d的长期取样，给出该取样周期内空气中HTO浓度的平均值。     

用于热核巨共振研究的大面积BGO闪烁探测器

报道了大面积BGO闪烁控制器用于132MeV^16O ^197Au反应中形成的热核巨共振研究，利用飞行时间法鉴别中子、γ。用EGS4程序模拟探讨器对γ连续谱的响应，利用BGO闪烁探测器中Ge俘获中子发射的γ对探测器进行了能量刻度。     

形式化语言在UMTS开发中的应用

由于3G协议规范的复杂性，3GPP方法论指导方针中鼓励使用标准的形式化语言来进行UMTS产品的设计、开发与测试。文中概要性地描述了UMTS的体系结构和在规范描述中用到的一些形式化语言的基本概念和特点，探讨了这些形式化语言在UMTS开发中的应用。使用形式化语言开发UMTS可以简化和改进测试程序，实现新产品与新标准的同步推出。     

锚注支护技术在修复巷道中的应用

新庄孜煤矿在总结各类支护型式优缺点的基础上 ,大力推广应用锚注支护技术 ,先后在修复高应力软岩冒落架棚巷道、修复砌碹巷道、修复大断面峒室等施工中灵活使用锚注支护技术 ,均取得良好的支护效果和显著的技术经济效益