变温条件下HDPE/CB的正电子湮灭特性

对掺杂了25份（phr）导电炭黑（CB）的样品进行了正电子湮灭寿命谱的变温测量，在玻璃化转变温度以上，随着温度的增加，自由体积的大小线性增加，在玻璃化转变温度以下，自由体积的大小基本不变，o-Ps的强度在－40℃下基本不变，从－40℃以上开始增加，但在50℃以上上升有加快的趋势，与PTC材料的PTC现象和导电性能有一定的关联。     

气敏材料的研究进展

从气敏材料种类，制备方法，改善气敏材料缺陷的手段等方面介绍了气敏材料的研究进展，论述了气敏材料研究中的新动向，展望了它的未来发展。     

透过符号看设计理念

符号设计作为当代设计理念的风格载体,承载着设计者的主观思想与文化观念的表达。文章以符号为本体,分析隐存其中的时代精神、民族文化以及设计个性,阐述设计观念对于当代符号设计的重要性。     

Sol-gel Preparation and Preliminary in vitro Evaluation of Fluorapatite／Hydroxyapatite Solid Solution Films

Fluorapatite/hydroxyapatite solid solution has better biological properties than other apatites, especially used as films or coatings. In this work, sol-gel preparation and in vitro behavior of fluorapatite/hydroxyapatite solid solution films on titanium alloy were investigated. Ca(NO3)2-4H20 and PO(OH)x(OEt)3-x were selected as precursors, and hexafluorophosphoric acid (HPFo) was used as a fluorine containing reagent. The Ca and P precursors were mixed with HPFo to keep the Ca/P molar ratio 1.67. The mixtures refluxed for 12 h were used as dipping sols for the preparation of the films. The phase of the films obtained at 600℃ was apatite. The F contents in the films increased with the concentrations of HPF6 in the dipping sols. The solid solution films were shown to have better stability than hydroxyapatite films, and a reasonably good bioactivity in the in vitro evaluation.     

胆甾相液晶的光学特性

基于胆甾相液晶的特殊分子结构，综合阐述了胆甾相液晶的旋光性、选择性光散射和偏振光二色性等光学特性，揭示了它的光学特性主要源于它螺旋状的分子结构及其光学各相异性。     

Recent Progress of HT-7U Superconducting Tokamak

HT-7U is a superconducting tokamak. which is being constructed in Institute of Plasma Physics, Chinese Academy of Sciences. The mission of the HT-7U project is to develop a scientific and engineering basis of the steady state operation of advanced tokamak.The engineering design of the device has been optimized. The R&D program is going on. Short samples of the conductor and a CS model coil were tested. All the TF and PF coils will be manufactured and tested in Institute of Plasma Physics. Therefore, a 600-meter long jacketing line for cable-in-conduit conductors along with two winding machines, a set of VPI equipment and a test facility for the TF and PF coils are ready in ASIPP now. In this paper, the recent progress of the HT-7U is described.     

低位真空预压法在淤泥固结中的应用

东钱湖湖底疏浚吹填试验段工程利用低位真空预压法作用机理，通过现场试验和检测，验证该方法在淤泥固结中的应用效果良好，为今后东钱湖进行大面积清淤积累经验。     

微加速度计粘附问题的研究及应用

粘附是影响微机电系统(MEMS)可靠性的重要因素之一。针对MEMS的典型产品——微加速度计的粘附问题进行了研究,给出了2种典型的微加速度计的表征粘附特性的剥离数的表达式,并分析了将粘附条件应用于微加速度计的多学科设计优化之中,分析了其对系统结构设计产生的影响。     

H.323话机主叫方物理地址定位的研究

本文提出了一套应、救急系统对H．323话机发起的呼叫定位其主叫物理地址的方案。方案分两部分内容：H．323网关对主叫物理地址的获取以及SS7信令对该地址的传输,本文详细阐述述了为实现这两部分内容而对相关协议流程所作的修改与补充。     

Comparative study of the elimination of toluene vapours in twin biotrickling filters using two microorganisms Bacillus cereus S1 and S2

BACKGROUND: To investigate the microbial degradation performance of organic pollutants in the atmosphere using a biotrickling filter, two microorganism strains, Bacillus cereus S1 and Bacillus cereus S2, were selected, identified and inoculated into a twin biotrickling filter for comparison. RESULTS: Both strains showed good performance towards the degradation of model organic pollutants when gas flow rates ranged from 100 to 600 L h⁻¹. For S1, the total maximum removal efficiency (RE) of toluene was maintained nearly 100% not only at gas flow rates of 100 L h⁻¹ corresponding to empty bed residence time (EBRT) 199.44 s, but also at gas flow rates of 200 L h⁻¹ (EBRT = 99.72 s) and 300 L h⁻¹ (EBRT = 66.48 s). However, S2 had a much lower degradation capability; near 100% removal efficiency was obtained only at the gas flow rate of 100 L h⁻¹ although both bacteria belong to the same Bacillus cereus. With further increase in gas flow rate, the total REs for both S1 and S2 decreased slightly at first and then dropped sharply to 46% and 35%, respectively, at an EBRT of 33.24 s, corresponding to a gas flow rate of 600 L h⁻¹. Starvation for between 2 and 10 days resulted in the re‐acclimation times of both strains ranging between 1.0 and 15.5 h. CONCLUSION: Strain S1 would be a better choice for inoculation into a biotrickling filter than strain S2, because of its much higher toluene removal capacity and rapid recovery to full performance. Copyright © 2008 Society of Chemical Industry