Image analysis of comet assay measurements

In the last decade the 'comet assay' or 'single cell gel electrophoresis assay' has been established as a sensitive method for the detection of DNA damage and the measurement of its recovery. The results published in the literature have often been obtained with different methods for comet structure measurement. In most cases these data are not comparable with each other. Even when using similar systems for the analysis, it is difficult to obtain matching data. This presentation will describe some technical aspects of our measurement equipment and evaluation software. It focuses on necessary experimental conditions to minimize errors in obtaining such data. The software developed here allows the rapid analysis of the microscopic samples (< 2 s per image). The image analysis was designed with respect to the morphological shapes of comet cells, which were investigated with a confocal laser microscope. The system is built with standard components which are commercially available. As a measure of the amount of DNA damage the ratio of fluorescence intensity was used inside the comet tail and the fluorescence intensity of the comet head. Other parameters such as DNA content, comet area, head radius, tail length and tail moment are also determined. The reproducibility of the system has been evaluated in several experiments over a period of 5 years.     

近期全国建材市场走势展望

结合当前我国建材市场的形势 ,就建材市场“涨价风潮”的起因 ,从经济增长的结果、市场运行的规律等方面进行了论述 ,提出了涨价风潮对近期全国建材市场的影响     

用边界元法提取VLSI版图电阻

介绍了ＶＬＳＩ版图验证中电阻提取的基本原理和主要方法，给出了一种新颖的基于边界元法的电阻提取算法。该算法采用变节点单元，较好地解决了实际问题中经常出现的角点问题。通过应用该算法对几个实例进行提取，证明使用本文的算法不仅在精度上而且在占用ＣＰＵ时间上都取得了令人满意的效果     

Microstructure of Pd_(77.5)Au_6Si_(16.5) Alloy Droplet Solidified in a Drop Tube Process

The microstructure development of Pd77.5Au6Si16.5 alloy droplet solidified in a drop tube process was studied. It was found that two distinct microstructures, i.e. (Pd,Au)3Si primary phase and Pd+(Pd,Au)3Si eutectic can be obtained when the droplet diameter is within the range between 2.3~0.4 mm. The morpologies of the (Pd,Au)3Si developed from dendrite trunk-like with single branching only into dendrite cluster-like with ternary branching with the decrease of the droplet diameter. When the droplet diameter is about 0.25 mm, the primary phase (Pd,Au)3Si almost disappears and the microstructure mainly shows Pd+(Pd,Au)3Si eutectic. The morphology of the eutectic transforms from fiber-like to plate-like with the decrease of the droplet diameter in the range between 2.3-0.25 mm. When the droplet diameter is about 0.19 mm, the microstructure is only the single phase of Pd solid solution     

TiO_2压敏陶瓷晶粒半导化

本文主要研究 TiO_2陶瓷晶粒半导化的途径及晶粒电阻率的测试方法。实验结果表明,通过掺入Nb_2O_5施主杂质可以有效地降低晶粒电阻率,并使 TiO_2系陶瓷具有良好的压敏特性。     

VITAMIN C AND β-CAROTENE IN FRESH AND FROZEN GREEN BEANS AND BROCCOLI IN A SIMULATED SYSTEM

The reduced ascorbic acid and β-carotene contents of “retail market-fresh” (RMF) and “fresh-frozen” (FF) green beans and broccoli in a simulated handling system were determined. Changes in ascorbic acid content in the two vegetables during a retail market period and frozen storage followed different patterns. In green beans, ascorbic acid content decreased during refrigerated storage for up to 7 days, but in broccoli there was a significant increase. Blanching resulted in a loss of approximately 40% of the ascorbic acid in broccoli. Ascorbic acid content of FF green beans stored at-20C for 16 weeks was approximately twice that in RMF green beans, but in FF broccoli stored under the same conditions it was only about half that of RMF broccoli. β-carotene content of green beans and broccoli did not change during either the retail market simulation of frozen storage and did not differ from that of fresh.     

SISAK快速化学分离装置的建立

SISAK(Short-lived Isotopes Studies by the AKUFVE technique)技术是目前使用最广泛的快速化学分离方法之一,主要应用在短寿命核素的分离和鉴别、超重元素的人工合成以及化学性质研究等方面的工作中.本文简单地叙述了SISAK技术的流程、原理和发展现状,介绍了自行建立的国内第一套基于SISAK技术的快速化学分离装置,并通过从裂变产物中分离短寿命核素这一实例验证了SISAK技术在快速化学分离中的优越性.     

弹性筛管防砂技术

弹性筛管防砂技术是根据稠油油藏高轮次吞吐和蒸汽驱井防砂生产需要而研制的筛管防砂新技术。进行了筛管结构优化、加厚过滤单元外罩设计、固定方式研究、弹性过滤材料筛选、防腐实验研究等。室内试验表明，筛管的过流能力在900cm^2／m以上、渗透率在100μm^2以上、筛管抗内、外压强度达到20MPa、防砂粒径在0.1mm以上、耐温350℃、pH值在3～12之间不被腐蚀。现场试验证明，该技术防砂和抗堵塞性能好，防砂有效期长，地层适应性强，施工简便，防砂生产效果明显，具有良好的应用前景。     

固凝(GT)防水材料在建筑工程中的应用

根据固凝(GT)系列防水材料的技术性能,分析其在寒冷地区屋面工程、厕浴厨房间和地下工程防水设计,以及建(构)筑物的抗冻、抗渗与防护等方面应用时应遵守的技术要点。     

低碳微合金钢中的晶内铁素体及组织控制

回顾和评述了晶内铁素体的发现、发展及其与组织控制的关系.介绍了晶内铁素体的形核机制和影响晶内铁素体形成的因素,讨论了晶内铁素体的三维形态和长大动力学,并从以上几方面分析了晶内铁素体对低碳微合金钢组织细化的重要作用和影响.