Composite group vector space method for estimating melting and boiling point of pure organic compound

Composition Group Vector Space (CGVS) method for estimating melting and boiling point T _m , T _b of organic compound has been proposed, and the principle of this method has been elucidated. The models for estimating T _m , T _b have been established and the numerical values of relative parameters have been presented. The average percentage deviations of T _m , T _b estimation are 7.53 and 1.58, respectively, which show that the present method demonstrates significant improvement in applicability to predict the above properties, compared to conventional group methods.     

微波辐射在提金活性炭技术中的应用

概述了微波辐射在提金活性发技术中的应用，将微波辐射和传统方法制备提金炭技术进行了比较，论述了微波辐射在制备提金炭及其解吸技术中的研究进展，最后对微波辐射在提金活性炭技术中的应用作了简单的展望。     

整体毡纤维体积分数对CVD增密的影响

将3组不同纤维体积分数的整体毡采用等温CVD进行沉积热解炭增密,结合CVD沉积过程中整体毡内气体传质数学模型,研究了整体毡的纤维体积分数对CVD增密过程的影响,研究结果表明:纤维体积低的整体毡沉积时增重率高;纤维体积分数高的整体毡容易获得较高密度的C/C复合材料;纤维体积分数超过35％的整体毡经过300 h的化学气相沉积,坯体的体积密度能达到1.52 g/cm~3。     

两相管流工艺计算软件的研制

利用流体力学理论 ,结合目前国内外最新的两相流理论和实验研究成果 ,在描述气液两相流水力计算、热力计算和流型判断的数学物理模型基础上 ,研制出适用于海洋、沙漠、丘陵地区原油与伴生气、凝析天然气与凝液输送工艺的一套新的计算模拟软件TFTCS。介绍TFTCS软件的结构、功能、适用范围。用该软件对锦州 2 0 - 2海底湿天然气管道进行模拟计算 ,并与管线生产数据进行对比 ,用国外同类软件PIPEPHASE进行验算。实例计算分析表明 ,该软件功能完善 ,操作方便 ,计算结果可靠 ,能满足油气混输管道的设计计算和生产管理的需要     

CpTi(dbm)Cl_2催化烯烃聚合及其聚合物性质

开发了一种新型非茂聚烯烃催化剂———CpTi(dbm)Cl2,考察了催化剂在均相及负载条件下对乙烯及乙烯-1-己烯共聚的催化行为。催化剂在均相条件下对乙烯聚合的催化活性较低,但用MgCl2和MgCl2/SiO2复合双载体对催化剂进行负载后,催化乙烯聚合具有非常好的催化活性。催化剂还具有良好的共聚能力及良好的氢调敏感性。     

紫外法测菜籽饼粕中硫代葡萄糖甙操作探讨

对用紫外法测菜籽饼粕中硫代葡萄糖甙过程中测试条件、操作质量等操作问题予以分析和探讨，以求提高测试结果的准确率。     

The long string as a field probe

We show how a long string can be used to probe the incident field across the target zone of a radar cross section (RCS) test range. The string may be stretched horizontally from wall to wall, or vertically from floor to ceiling. One end of the string is fixed and the other end is moved by an actuator mounted in the wall or ceiling. The resulting motion changes the angle of the string with respect to the incident-field direction, during which time the coherent radar echo is recorded as a function of the string angle. The coherent signal-as-a-function-of-angle data are then transformed to the cross-range domain using the fast Fourier transform (FFT), whence we obtain a chart of the incident field amplitude as a function of cross-range distance. Numerical examples are presented that show how variations in the incident field influence the string echo. A sample of experimental data shows that the processed data are readily interpreted.     

A high-resolution burst-mode laser transmitter with fast and accurate level monitoring for 1.25 Gb/s upstream GPONs

An innovative burst-mode laser transmitter (BM-TX) is presented for gigabit-capable passive optical network (GPON) upstream transmission at 1.25 Gb/s. The laser bias and modulation current each can reach 80 mA with a resolution of 0.1 mA providing a total drive current up to 160 mA. Both currents are generated by 10-bit current steering digital-to-analog converters (DACs), the architecture of which is specially adapted to yield a monotonic current setting at settling times below 12.8 ns. Tests show that fast automatic power control (APC) can stabilize and track the launched optical power with a tolerance of less than 1 dB over a wide temperature range for outdoor operation. The APC only requires a straightforward calibration of the "0" and the "1" level at room temperature. Optical level monitoring on strings of four consecutive "0" bytes and two consecutive "1" bytes at 1.25 Gb/s is demonstrated. APC based on such short strings of data has not been shown before. The circuits have been designed in a 0.35 /spl mu/m SiGe BiCMOS process. Experimental results show that this dc-coupled BM-TX meets the specifications of the recently approved ITU-T Recommendation G.984.2 supporting an intelligent power leveling mechanism (PLM).     

添加VC的TiB2基硬质材料研究

对添加VC的TiB2基硬质材料进行了研究。通过实验测定了硬度、横向断裂强度、高温强度以及耐磨性等性能，通过观察SEM照片研究了VC对TiB2基硬质材料组织结构的影响。综合各种指标，我们确定在TiB2-Fe—Mo硬质材料中VC的最佳添加量为0．5％。